Developing a passion for work passion: Future directions on an emerging construct

Although the passion that people demonstrate at work would appear to be a topic of considerable interest and importance to organizational scholars and practitioners, we know virtually nothing about it. In response, we introduce the work passion construct, discuss what we currently understand, and provide needed directions for future research. Copyright © 2013 John Wiley & Sons, Ltd.     

Assessing vulnerability to sea-level rise using a coastal sensitivity index: a case study from southeast Australia

Many of the world’s coasts appear vulnerable to the impacts of climate change and sea-level rise. This paper assesses the application of a coastal sensitivity index (CSI) to the Illawarra coast, a relatively well-studied shoreline in southeast Australia. Nine variables, namely (a) rock type, (b) coastal slope (c) geomorphology (d) barrier type (e) shoreline exposure (f) shoreline change (g) relative sea-level rise (h) mean wave height and (j) mean tide range, were adopted in calculation of the CSI (the square root of the product of the ranked variables divided by the number of variables). Two new variables, shoreline exposure and barrier type, were trialled in this analysis and the extent to which these increased the discriminatory power of the index was assessed. Four iterations of the CSI were undertaken using different combinations of ranked variables for each of 105 cells in a grid template, and the index values derived were displayed based on quartiles, indicating sections of coast with very high, high, moderate and low sensitivity. Increasing the number of variables increased the discriminatory power of the index, but the broad pattern and the rank order were very similar for each of the iterations. Rocky and cliffed sections of coast are least sensitive whereas sandy beaches backed by low plains or dunes record the highest sensitivity. It is difficult to determine shoreline change on this coast, because individual storms result in substantial erosion of beaches, but there are prolonged subsequent periods of accretion and foredune rebuilding. Consequently this variable is not a good indicator of shoreline sensitivity and the index is unlikely to provide a clear basis for forecasting future recession of beaches. The results of this study provide a framework for coastal managers and planners to prioritize efforts to enhance the resilience or consider adaptation measures in the coastal zone within a study region. Sensitivity of the coast if considered in conjunction with other social factors may be an input into broader assessments of the overall vulnerability of coasts and their communities.     

Evaluation of a standardized method for determining soluble silver in workplace air samples

Several occupational exposure limits and guidelines exist for silver, but the values for each depend on the chemical form of the silver compound in question. In the past, it generally was not possible, without prior knowledge of the work process, to distinguish soluble silver from insoluble silver compounds collected in workplace air samples. Therefore, analytical results were historically reported as total silver. In this study, work was conducted to evaluate a method to differentiate between the quantities of water-soluble silver compounds and total silver collected on filters. The investigation entailed an evaluation of an International Organization for Standardization method to determine soluble silver in airborne particulate matter. The study design incorporated laboratory experiments to evaluate analytical figures of merit, such as selection of appropriate filter media and extraction solution, analytical recovery, and sample stability during storage. Polytetrafluoroethylene (PTFE) filters (2 microm, 37 mm) in opaque cassettes were either spiked with known amounts of silver nitrate or contained a known mass of solid silver nitrate. Results showed that over 90% of the silver was recovered from PTFE filters. Also, field studies were conducted in which workplace air samples were collected in two silver refineries. Some of these samples were analyzed only for soluble silver while others were sequentially extracted and analyzed, first, for soluble silver, then for total silver. The mass fractions of soluble silver, as compared to total silver, were approximately 2% or less. This investigation served to validate an international standard procedure for the determination of soluble silver in workplace air samples.     

Rapid and Sensitive LC/MS/MS Direct Injection Method for the Determination of Trace Level Corexit EC9500A Oil Dispersant in Seawater

A rapid and sensitive liquid chromatography tandem mass spectrometry (LC/MS/MS) method for the determination of trace dioctyl sulfosuccinate (DOSS) concentrations in seawater samples has been established. The method is well suited to aquatic environment impact monitoring following application of the dispersant Corexit EC9500A. Linearity of the method was demonstrated down to 0.05 ng/mL^?1 (0.05 µgL^?1) DOSS in seawater, with a 2.4% relative standard deviation precision for preparation replicates. A US EPA method limit of detection of <0.02 ng/mL^?1 (<0.02 µgL^?1) was calculated and specificity was confirmed by monitoring of two qualifier ions at 291.1 m/z and 227.1 m/z. These transitions were confirmed by QToF analysis to be associated with the DOSS precursor ion at 421.2 m/z. For application to seawater samples and samples containing oil particulates, a practical and repeatable calibration range of 0.5 ng/mL^?1 (0.5 µgL^?1) to 25.0 ng/mL^?1 (25.0 µgL^?1) DOSS is reported. The method was shown to have excellent precision and accuracy, with a consistent ≤1.6% relative standard deviation for system suitability standards at 0.5 ng/mL^?1 (0.5 µgL^?1) and linear weighted (1/x) regression coefficients of determination ≥0.995. The surfactant nature of the analyte is discussed in relation to detection limit and loss of analyte. Speculation of a relationship between DOSS in association or aggregation with divalent cations, such as Ca²⁺ present in salt water and hard water, is suggested. The consequent effects on cell ionic balance and membrane function are discussed.     

Rapidly Locating and Characterizing Pollutant Releases in Buildings

Abstract

Releases of airborne contaminants in or near a building can lead to significant human exposures unless prompt response measures are taken. However, possible responses can include conflicting strategies, such as shutting the ventilation system off versus running it in a purge mode or having occupants evacuate versus sheltering in place. The proper choice depends in part on knowing the source locations, the amounts released, and the likely future dispersion routes of the pollutants. We present an approach that estimates this information in real time. It applies Bayesian statistics to interpret measurements of airborne pollutant concentrations from multiple sensors placed in the building and computes best estimates and uncertainties of the release conditions. The algorithm is fast, capable of continuously updating the estimates as measurements stream in from sensors. We demonstrate the approach using a hypothetical pollutant release in a five-room building. Unknowns to the interpretation algorithm include location, duration, and strength of the source, and some building and weather conditions. Two sensor sampling plans and three levels of data quality are examined. Data interpretation in all examples is rapid; however, locating and characterizing the source with high probability depends on the amount and quality of data and the sampling plan.     

MTBE in California Drinking Water: An Analysis of Patterns and Trends

Over the past decade, there has been much publicity surrounding the impact of Methyl tert -butyl ether (MTBE) on drinking water supplies in the United States. In California, the presence of MTBE in groundwater and drinking water has led to a ban on the future use of MTBE in gasoline. Other states, such as those in the northeast, are also seeking ways to reduce or eliminate the use of MTBE due to perceived threats to the environment and public health. Despite claims about the incidence of MTBE in drinking water, no comprehensive characterization has been conducted on the available drinking water monitoring data. This paper provides a detailed analysis of the MTBE drinking water data compiled by the California Department of Health Services (CDHS) from 1995 to 2000. We find that MTBE was detected in about 1.3% of all drinking water samples, 2.5% of drinking water sources, and 3.7% of drinking water systems in California over this 6-year period. Our analysis reveals that many drinking water sources are not sampled routinely for MTBE, and in those sources that appear to be affected by MTBE, the compound is not consistently detected. The majority of MTBE detections are also concentrated in several geographic areas, which contain about 9-21% of the total California population. Average detected MTBE concentrations have decreased significantly since 1995 and 1996, ranging from 5 to 15 ppb over the last 3 years depending on the outcome of interest. Of the samples in which MTBE was present above the analytical detection limit, the concentrations in approximately 73% of drinking water samples and 86% of drinking water sources and systems were below the State's primary health-based standard of 13 ppb. Our findings suggest that, although some drinking water supplies in California have been affected by MTBE, the majority of drinking water sources and systems either have not been affected at all or contain MTBE at concentrations below levels that are likely to be of health concern.     

Coupling surfactants/cosolvents with oxidants for enhanced DNAPL removal: A review

Surfactants and cosolvents are useful for enhancing the apparent solubility of dense nonaqueous‐phase liquid (DNAPL) compounds during surfactant‐enhanced aquifer remediation (SEAR). In situ chemical oxidation (ISCO) with permanganate, persulfate, and catalyzed hydrogen peroxide has proven to be a cost‐effective and viable remediation technology for the treatment of a wide range of organic contaminants. Coupling compatible remedial technologies either concurrently or sequentially in a treatment train is an emerging concept for more effective cleanup of DNAPL‐contaminated sites. Surfactants are effective for DNAPL mass removal but not useful for dissolved plume treatment. ISCO is effective for plume control and treatment but can be less effective in areas where large masses of DNAPL are present. Therefore, coupling SEAR with ISCO is a logical next step for source‐zone treatment. This article provides a critical review of peer‐reviewed scientific literature, nonreviewed professional journals, and conference proceedings where surfactants/cosolvents and oxidants have been utilized, either concurrently or sequentially, for DNAPL mass removal. © 2010 Wiley Periodicals, Inc.     

Assessing the micro-phytoplankton response to nitrate in Comau Fjord (42°S) in Patagonia (Chile), using a microcosms approach

Anthropogenic (aquaculture) changes in environment nutrient concentrations may affect phytoplankton (biomass and taxa composition) in marine coastal waters off the Chilean Patagonia. The effects of adding nitrate (NO₃ ^?) to natural phytoplankton assemblages were evaluated considering biomass, cell abundance, and taxonomic composition. Microcosm experiments were performed in the spring, summer, and winter in the Comau Fjord located in Subantarctic Patagonia. At the end of the experiments, NO₃ ^? decreased rapidly and was undetectable in treatments, indicating a strong NO₃ ^? deficiency associated with an exponential increase in Chl-a concentrations, particulate organic nitrogen, and carbon in these treatments. Moreover, given the depleted nitrate concentrations of the spring and summer experiments, the micro-phytoplankton taxa structure shifted from mixed diatom and dinoflagellate assemblages (Ceratium spp., Dinophysis spp., Coscinodiscus sp., Rhizosolenia pungens) to assemblages dominated by blooms of the classic chain-forming diatoms found in temperate and cold waters such as Chaetoceros spp., Skeletonema spp., and Thalassiosira spp. Thus, nitrogen sources (i.e., nitrate, ammonia) may influence phytoplankton abundance and biomass accumulation dynamics in the northern section of Patagonia. It also emphasizes the importance of diatom taxa in regards to the short-term response of phytoplankton to changing environmental nutrient conditions due to natural (decreasing freshwater stream flow) and anthropogenic (aquaculture) events. This situation may be one of the future scenarios in the Patagonian fjords, thus stressing the needs for active environmental monitoring and impact assessment.     

Monitoring fugitive dust emissions from off-highway vehicles traveling on unpaved roads and trails using passive samplers

Vehicles traveling on dry, unpaved roads generate copious quantities fugitive dust that contributes to soil erosion, and potentially threatens human health and ecosystems. The purpose of this study was to develop a low-cost technique for monitoring road dust that would enable land managers to estimate soil loss. The "sticky-trap" collectors developed were evaluated at the Turkey Bay off-highway vehicle (OHV) riding area on the Land Between the Lakes National Recreation Area, in western Kentucky. The results showed that the dust plume created by vehicle traffic was heterogeneous: larger particles were in the lower part of the plume and deposited closer to the source, smaller particles were carried higher in the plume and traveled at least 100 m away from the source. Collection of particles parallel to the source was also heterogeneous, suggesting that measurements taken at a single point may not be appropriate for estimating erosion losses. Measurements taken along two trails indicate that when large numbers of riders are present, dust concentrations may reach unhealthful conditions for riders, but that it is unlikely that fugitive dust is harming native vegetation, given frequent rainfall. The study demonstrated that OHV traffic contributes to substantial erosion of roadbeds because of aeolian transport.