Distribution, sources, and potential risk of polycyclic aromatic hydrocarbons (PAHs) in drinking water resources from Henan Province in middle of China

Distribution and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in drinking water resources have been carried out for the first time in Henan Province, China. Water samples collected from four river systems and their tributaries, as well as groundwater resources, were analyzed according to EPA method 525.2. Total of 68 water samples were collected in 18 cities in Henan province in May, August and November, 2001. Concentrations of sum of 16 priority PAHs in water samples ranged from 15 to 844 ng/L with a mean value of 178 +/- 210 ng/L (n = 68). The spatial and temporal distribution of PAHs showed that the Huanghe and the Huaihe river systems had relatively higher concentrations of total PAHs. Higher concentrations of total PAHs were observed in August and November than in May, with respective mean values of 262, 232 and 33.6 ng/L. Ratios of Ant/(Ant + Phe) and Flur/(Flur + Pyr) were calculated to evaluate the possible sources of PAH contamination, which indicated that the coal combustion sources were the main contributors to PAHs in most drinking water resources. Some petrogenic (or pyrolytic) sources of PAHs were also found. The toxic equivalency factors (TEFs) were used to calculate benzo[a]pyrene equivalents (BaPE) for water samples. The average value of BaPE was 0.6 ng/L. The values in most stations were much lower than the guideline values in drinking water of Chinese Environmental Protection Agency (CEPA, 2.8 ng/L) and the US Environmental Protection Agency (US EPA, 200 ng/L). Overall, the drinking water resources in Henan province showed some carcinogenic potential.     

Comparative studies on seasonal variations of metazooplankton in waters with different eutrophic states in Lake Taihu

A comparative study on the metazooplankton community was conducted in three different eutrophic areas, including Lake Wulihu, Meiliang Bay and the central open water area, in Lake Taihu from Oct. 2003 to Sep. 2004. Forty metazooplankton species were identified in Lake Wulihu, 37 in Meiliang Bay, and 34 in the central open water area. The annual average abundance of metazooplankton was 218 ind. l(-1) in the central open water area, 309 ind. l(-1) in Meiliang Bay, and 384 ind. l(-1) in Lake Wulihu. In Lake Wulihu, rotifers, Brachionus calyciflorus and Brachionus angularis, were the dominant species, which contributed 20.9% and 17.2% to the total metazooplankton abundance. Bosmina coregoni and Ceriodaphnia cornuta were the dominant species, contributing 20.4% and 11.3% of the total in Meiliang Bay, and contributing 21.6% and 16.2% of the total in the central open water area. There was a significant positive relationship between rotifers abundance and Secchi transparency. Cladoceran and copepod abundance were positively correlated with total phosphorus and water temperature. Our results show that structures of metazooplankton community differ between the three lake areas with different eutrophic states in Lake Taihu.     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

烟气脱硝技术及在我国的应用

氮氧化物气体是危害最大、最难处理的大气污染物之一。随着经济的发展,有效控制燃煤造成的大气污染已经刻不容缓,特别是控制燃煤过程中的氮氧化物,烟气脱硝技术显得相当重要。本文分析了几种常用的烟气脱硝技术（选择性催化还原脱硝技术、选择性非催化还原脱硝技术、碱性溶液吸收法和等离子体活化法等）的原理、技术特点以及在我国的应用情况。     

羊八井地热区典型植物对氟的吸附富集特征探究

采用水浴提取法处理羊八井地热区土壤和植物样品中可溶性氟,并用离子选择性电极法测定提取液及地热水中的氟。结果表明,地热水中氟离子最高为162 mg/L,土壤和植物中水溶性氟分别为347 mg/kg~937 mg/kg和189 mg/kg~164 mg/kg。氟离子在不同植物中的分布差异较大,嵩草属植物富集氟离子的能力最强,故可利用植物修复技术对高氟地热水、土壤净化处理,以降低氟污染。     

Dissipation and residue behavior of mepiquat on wheat and potato field application

A modified LC-MS method for the analysis of mepiquat residue in wheat, potato, and soil was developed and validated. A hydrophilic interaction liquid chromatographic column has been successfully used to retain and separate the mepiquat. Mepiquat residue dynamics and final residues in supervised field trials at Good Agricultural Practice (GAP) conditions in wheat, potato, and soil were studied. The limits of quantification for mepiquat in all samples were all 0.007 mg kg^?1, which were lower than their maximum residue limits. At fortification levels of 0.04, 0.2, and 2 mg kg^?1 in all samples, recoveries ranged from 77.5 to 116.4 % with relative standard deviations of 0.4–7.9 % (n?=?5). The dissipation half-lives (T _1/2) of mepiquat in soil (wheat), wheat plants, soil (potato), and potato plants were 4.5–6.3, 3.0–5.6, 2.2–4.6, and 2.4–3.2 days, respectively. The final residues of mepiquat were below 0.153 mg kg^?1 in soil (wheat), 0.052–1.900 mg kg^?1 in wheat, below 0.072 mg kg^?1 in soil (potato), and below 1.173 mg kg^?1 in potato at harvest time. Moreover, pesticide risk assessment for all the detected residues was conducted. A maximum 0.0012 % of acceptable daily intake (150 mg kg^?1) for national estimated daily intake indicated low dietary risk of these products.     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.     

露天矿溜槽粉尘逸散规律试验研究

为探索露天矿用溜槽系统粉尘逸散的影响因素,阐明溜槽系统运输过程中粉尘的产生机理和运移规律,从而解决溜槽系统产生的粉尘污染问题,以抚顺西露天矿为研究背景,运用相似理论,建立溜槽模型,通过单因素试验和正交试验,分别研究物料粉岩质量分数、物料含水率、溜槽倾角对溜槽运行过程中粉尘质量浓度的影响。单因素试验结果表明,粉尘质量浓度随物料粉岩质量分数、溜槽倾角增大而逐渐增大,随含水率增大而逐渐降低,溜槽底部粉尘质量浓度受影响变化幅度较大,溜槽中部和上部变化较小。溜槽粉尘质量浓度分布规律为溜槽底部粉尘产生量最大,中部次之,上方最小。溜槽底部为粉尘污染防治重点区域。正交试验结果表明,物料含水率对粉尘逸散影响最大,其次是粉岩质量分数,溜槽倾角影响最小。