Mo-modified Pd/Al2O3 catalysts for benzene catalytic combustion

Mo-modified Pd/Al2O3catalysts were prepared by an impregnation method and tested for the catalytic combustion of benzene. The catalysts were characterized by N2 isothermal adsorption, X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, temperatureprogrammed desorption of NH3（NH3-TPD）, H2temperature-programmed reduction（H2-TPR）, and high-angle annular dark-field scanning transmission electron microscopy（HAADF-STEM）. The results showed that the addition of Mo effectively improved the activity and stability of the Pd/Al2O3catalyst by increasing the dispersion of Pd active components, changing the partial oxidation state of palladium and increasing the oxygen species concentration on the surface of catalyst. In the case of the Pd-Mo/Al2O3catalyst,benzene conversion of 90% was obtained at temperatures as low as 190°C, which was 45°C lower than that for similar performance with the Pd/Al2O3catalyst. Moreover, the 1.0% Pd-5% Mo/Al2O3catalyst was more active than the 2.0% Pd/Al2O3catalyst. It was concluded that Pd and Mo have a synergistic effect in benzene catalytic combustion.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

混凝气浮+SBR处理再生花炮纸工艺废水的应用

采用混凝气浮+SBR处理年产1万t再生花炮纸工艺废水,对SS、CODCr、BOD5的处理效率分别为96.2%、96.2%、93.1%,最大日均值排放浓度分别为64mg/L、80.7mg/L、26mg/L,排放负荷分别为0.59kg/t、0.63kg/t、0.22 kg/t,均未超过标准限值的要求(pH范围为6.14-7.20);CODCr年排放总量5.4t小于20t/年;纸浆回收率92.0%、白水回用率94.4%、水循环利用率93.2%达标;实现"三排三率"六达标。     

Financing for innovative technologies and best practices to reduce persistent organic pollutants

Persistent Organic Pollutants (POPs) threaten human health and the global environment. Recognizing their dangers many countries began to limit or ban POPs production, use, and release in the 1990s. Eventually the Stockholm Convention on POPs, was adopted in 2001 and entered into force in 2004. The Global Environment Facility (GEF) provides financial support to developing country Parties for the implementation of the Stockholm Convention. The GEF’s POPs investment portfolio focuses on: 1) strengthening the capacity of developing country Parties to implement the Stockholm Convention; 2) establishing and supporting partnerships to develop and implement National Implementation Plans (NIPs), and 3) demonstrating and deploying best technologies and practices to reduce POPs emission, including development of safe alternatives. Since 2001 the GEF has committed US$568.8 million to POPs projects and leveraged some US$1474.5 million in co-financing from partners in the public and private sectors, bringing the total value of the GEF POPs portfolio to over US$2 billion. With GEF support, 108 developing country Parties have developed their NIPs. The GEF also financed 109 projects for the implementation of the Convention. Upon completion, these GEF POPs investments will contribute to the disposal of more than 70,000 tons of Polychlorinated Biphenyls (PCBs) oil, contaminated equipments, and waste, more than 40,000 tons of obsolete POPs pesticides and associated waste, and reducing dioxin/furan and mercury emission by introducing environmentally sound technologies and best practices. This paper summarizes: 1) direct and indirect GEF investments to support the goals of the Stockholm Convention; 2) investment case studies on PCB, DichloroDiphenylTrichloroethane (DDT), chlordane and mirex, medical waste, obsolete POPs and engaging civil society; and 3) lessons learned in terms of GEF financing strategies, best technologies and environmental practices to address POPs.     

中国石化炼油企业QHSE管理体系典型建过程研究

总结了中国石化炼油企业构建QHSE管理体系的典型步骤和内容,描述了体系构建各阶段的工作和要求,并提出了构建QHSE管理体系过程中的关注要点.     

Fe2+和Fe3+对厌氧氨氧化污泥活性的影响

通过接种厌氧氨氧化污泥研究了Fe离子浓度及价态变化对厌氧氨氧化污泥活性的影响.短期浓度影响结果表明,当进水铁离子浓度由0升高到5 mg·L-1时,厌氧氨氧化污泥活性因受刺激而逐渐增强;当进水铁离子浓度大于5 mg·L-1时,因厌氧氨氧化反应产碱,铁离子形成氢氧化物沉淀,生物活性未受到影响.不同价态铁离子浓度变化对厌氧氨氧化污泥活性的影响无明显区别.长期价态影响结果表明,经过71个周期培养,含Fe2+进水的厌氧氨氧化反应器R1脱氮效能(以氮计)由0.28 kg·(m3·d)-1升高到0.65 kg·(m3·d)-1,是含Fe3+进水反应器R2的1.28倍.因此Fe2+更适合厌氧氨氧化菌生长的需求.实验结果进一步表明,Fe3+易导致厌氧氨氧化反应器R2内氨氮过量转化,亚硝氮与氨氮转化比(1.17)明显低于含Fe2+进水的反应器R1内亚硝氮与氨氮转化比(1.24).     

基于化学与生物复合指标的流域水生态系统健康评价——以滇池为例

水生态系统在人类社会的发展过程中发挥着至关重要的作用,由于人类活动的干扰,水生态系统的健康状况受到严重威胁.因此,本研究在对滇池流域水生态系统状况深入调查研究的基础上,根据水质状态和生态特性,利用层次分析法构建以化学完整性和生物完整性为标准的滇池流域水生态系统健康评估指标体系,计算各样点健康评价指标,综合评价滇池流域水生态系统健康状态.结果表明:滇池全流域水生态系统整体健康状态处于中下水平,流域上游区域健康等级多为良好,流域中游区域健康等级多为一般,流域下游区域健康等级多为一般和极差;滇池湖体健康等级则多为一般和差,尤以滇池北部(草海)健康状况较差;滇池流域河流和水库的健康状态整体比滇池湖泊的健康状态好,河流和水库的健康状态差异性不显著;生物状况是滇池流域水生态系统健康状态较差的主要限制性因素.     

崇明典型水生生物中雌激素含量和分布特征

采用超高效液相色谱串联质谱系统(UHPLC-MS2)检测崇明岛9种典型水生生物体中5种典型雌激素的含量,包括雌酮(E1)、雌二醇(E2)、雌三醇(E3)、炔雌醇(EE2)和双酚A(BPA).并探讨其分布特征,进行初步健康风险评价.结果表明,9种典型水生生物中雌激素总量(以dw计)为1.1~7.38 ng·g-1,平均为4.25 ng·g-1.雌激素脂肪含量(以lw计)在5.01~83.41 ng·g-1之间,平均值为40.75 ng·g-1,雌激素脂肪含量水平表现为鱼类>虾类>蟹类.鱼类和蟹类,虾类之间雌激素脂肪含量差异性显著,蟹类和虾类之间不存在显著差异性.从检出率和检出含量看,甾醇类雌激素(E1、E2、E3和EE2)的残留明显低于酚类雌激素(BPA).E1、E2、E3和EE2的检出率小于66.67%,平均干重含量为0.17~0.69ng·g-1,而BPA的检出率高达100%,检出的平均干重含量为2.60 ng·g-1.健康风险评估结果表明,崇明岛水产品中雌激素对健康影响不大.     

浅谈装备环境适应性与可靠性

分析了环境适应性与可靠性定义中有关时间、环境、能力的内涵,对比了二者的联系与区别。介绍了目前对这2种质量特性进行度量的现状。阐述了环境试验与可靠性试验的内涵,发展历程和主要方法。从而总体描述了装备环境适应性与可靠性的关系。     

热脱附-气相色谱法测定空气中的总挥发性有机化合物研究

建立了热脱附-毛细管气相色谱法测定空气中苯、甲苯、乙酸丁酯、乙苯、对/间二甲苯、邻二甲苯、苯乙烯和十一烷等挥发性有机物的检测方法。九种挥发性有机物在一定浓度范围内标准曲线线性良好,相关系数均在0.997~0.999之间。检出限在0.002~0.005 mg/m3(采样体积1.0 L计)。用该方法检测了企业产生的有机废气及厂区周边环境空气,实验结果表明该方法灵敏度高、操作简单、重现性好、准确可靠,能够满足对实际样品的分析要求。