海绵城市透水砖铺装系统雨水入渗及重金属污染物迁移模拟

海绵城市透水砖铺装系统（PBPS）入渗特征是产流控制及径流污染物去除的重要影响因素之一。通过渗流实验,构建系统土壤层土水特征曲线,建立降雨入渗及径流重金属污染物迁移数学模型,以阐明找平层土壤粒径、基层与垫层厚度比对产流时间及径流重金属污染物去除的影响。研究表明:综合考虑延迟产流与径流重金属去除能力,中砂作为找平层介质最佳;依据结构层出水重金属污染物浓度,基层与垫层厚度比为15∶4时,PBPS对径流中重金属污染物吸附效率最高、去除效果较好。     

Phosphate recovery with granular acid-activated neutralized red mud: Fixed-bed column performance and breakthrough curve modelling

Granular acid-activated neutralized red mud (AaN-RM) has been successfully prepared with good chemical stability and physical strength. However, its potential for industrial application remains unknown. Therefore, the performance of granular AaN-RM for phosphate recovery in a fixed-bed column was investigated. The results demonstrated that the phosphate adsorption performance of granular AaN-RM in a fixed-bed column was affected by various operational parameters, such as the bed depth, flow rate, initial solution pH and initial phosphate concentration. With the optimal empty-bed contact time (EBCT) of 24.27 min, the number of processed bed volumes and the phosphate adsorption capacity reached 496.95 and 84.80 mg/g, respectively. Then, the saturated fixed-bed column could be effectively regenerated with a 0.5 mol/L HCl solution. The desorption efficiency remained as high as 83.45% with a low weight loss of 3.57% in the fifth regeneration cycle. In addition, breakthrough curve modelling showed that a 5-9-1 feed-forward artificial neural network (ANN) could be effectively applied for the optimization of the fixed-bed adsorption system; the coefficient of determination (R²) and the root mean square error (RMSE) evaluated on the validation-testing data were 0.9987 and 0.0183, respectively. Therefore, granular AaN-RM fixed-bed adsorption exhibits promising potential for phosphate removal and recovery from polluted water.     

Hygroscopicity measurement of sodium carbonate, β-alanine and internally mixed β-alanine/Na2CO3 particles by ATR-FTIR

Water-uptakes of pure sodium carbonate(Na_2CO_3),pure β-alanine and internally mixedβ-alanine/Na_2CO_3 aerosol particles with different mole ratios are first monitored using attenuated total reflectance Fourier transform infrared spectroscopy(ATR-FTIR) technique.For pure Na_2CO_3 aerosol particles,combining the absorptions at 877 and 1422 cm-1 with abrupt water loss shows the efflorescence relative humidity(ERH) of 62.9%–51.9%.Upon humidifying,solid Na_2CO_3 firstly absorbs water to from Na_2CO_3·H2 O crystal at 72.0% RH and then deliquesces at 84.5% RH(DRH).As for pure β-alanine particles,the crystallization takes place in the range of 42.4%–33.2% RH and becomes droplets at ～ 88.2% RH.When β-alanine is mixed with Na_2CO_3 at various mole ratios,it shows no efflorescence of Na_2CO_3 whenβ-alanine to Na_2CO_3 mole ratio(OIR) is 2:1.For 1:1 and 1:2 β-alanine/Na_2CO_3 aerosols,the ERHs of Na_2CO_3 are 51.8%–42.3% and 57.1%–42.3%,respectively.While β-alanine crystal appears from 62.7% RH for 2:1 and 59.4% RH for both 1:1 and 1:2 particles and lasts to driest state.On hydration,the DRH is 44.7%–75.2% for Na_2CO_3 with the OIR of 1:1 and 44.7%–69.0%for 1:2 mixture,and those of β-alanine are 74.8% for 2:1 mixture and 68.9% for two others.After the first dehumidification–humidification,all the water contents decrease despite of constituent fraction.And at ～ 92% RH,the remaining water contents are 92%,89% and 82%at ～ 92% RH,corresponding to OIR of 2:1,1:1 and 1:2 mixed system,respectively.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

不同居民燃煤炉具大气污染物排放差异性及减排分析

为探究不同类型炉具的大气污染物排放差异,本研究选择5种常见的新式居民燃煤炉具（方型煤炉具、折流换热炉具、炕暖炊一体化炉具、气化正烧及气化反烧炉具）在实验室内进行模拟燃烧和大气污染物排放水平监测,定量评估不同炉具的环境效果,识别污染排放水平差异的影响因素及原因,从而提出炉具研发设计等污染减排的改进建议.结果表明：①不同炉具大气污染物排放差异较大,炕暖炊一体的炉具污染排放强度最大,3种大气污染物（SO₂、NO_x和颗粒物）的排放强度为2.9 kg ·t^-1,是平均值的1.6倍;应用方型煤技术的炉具大气污染物排放强度最低,是平均值的65%.②不同炉具在不同燃烧阶段其气态污染物排放也呈现出明显的差异和特征.旺火阶段方型煤炉具NO_x排放浓度为0.49mg ·m^-3,相较于其他类型炉具降低了45%~72%;气化反烧炉具的SO₂排放浓度为1.38mg ·m^-3,相较于其他类型炉具最高降低了28%.③影响炉具大气污染物排放因素包括应用技术及燃烧类型,采用方型煤及气化反烧技术的炉具环境效益较好,但两类炉具的经济成本分别达到2.0万元和1.8万元,明显高于其他类型炉具.④考虑不同炉具污染排放差异,建议采取差异化的经济政策和严格的排放和产品标准,推广使用节能环保型炉具,降低燃煤炉具大气污染物排放.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.     

氧基氯化铁非均相活化过一硫酸盐降解金橙Ⅱ

采用部分热分解法制备了氧基氯化铁（FeOCl）,用于活化过一硫酸盐（PMS）降解难降解偶氮染料金橙Ⅱ（AO7）.利用X射线光电子能谱分析（XPS）、扫描电镜（SEM）和X射线衍射光谱（XRD）对其进行了表征;通过实验评估FeOCl/PMS体系对AO7的降解效果并分析了影响AO7去除率的各种因素.结果表明：FeOCl活化PMS降解AO7效果良好,矿化率达44%.在中性条件下,当FeOCl投加量50mg/L、PMS浓度1.0mmol/L、AO7浓度0.05mmol/L时,AO7可在30min内完全降解.随PMS投加量、FeOCl投加量、Cl^-浓度和反应初始pH值的增大,AO7的脱色效果提高.FeOCl还具有良好的重复利用性.此外,通过自由基淬灭实验、EPR测试和XPS分析了反应的主要活性物种和反应机理：由PMS活化产生的SO₄^-·和·OH对污染物进行降解,其中主要活性物种为SO₄^-·.     

洪泽湖不同入湖河流沉积物磷形态特征及生物有效性

为揭示洪泽湖入湖河流沉积物磷形态空间差异性及影响因素,分析了洪泽湖自西北向西南7条入湖河流65个表层沉积物中不同磷（P）形态,并探讨了磷形态空间赋存特征的影响因素及环境意义.研究表明：沉积物总磷（TP）含量为488.90mg/kg~960.22mg/kg,无机磷（Pi）为主要形态,相对含量为65.81%~76.16%.西部入湖流域沉积物有机磷（Po）以非活性有机磷（NLOP）为主,汴河最高,相对含量约占Po的50.41%,生物有效态无机磷（BAP）相对含量最高,占Pi的66.84%,污染程度最高;西南和西北入湖流域Po则以中活性有机磷（MLOP）为主,Pi以钙结合态无机磷（HCl-Pi）为主.西北入湖流域由于受当地地质背景的影响,HCl-Pi所占Pi相对含量最高（43.02%）,从而减缓了磷的移动能力,污染程度最低.随着沉积物污染程度的增加,生物有效态Po含量增加,但所占Po相对含量降低;HCl-Pi含量增加,所占Pi相对含量降低,这一现象和我国其它典型地区沉积物磷形态空间分布类似.西部和西南入湖流域主要受水土流失、有机面源污染及藻类生长的影响,有机质环境较高,水交换能力弱,可被有机质降解的Po组分高于可被矿化的Po组分,大部分难降解Po组分易沉积,导致西部和西南入湖流域较高的BAP和NLOP含量,富营养化程度较高.沉积物OM是各形态磷之间相互转化的关键因素,和沉积物内源磷地球生物化学循环密切相关.洪泽湖入湖流域沉积物磷形态空间差异性主要由农业面源污染物的输入而导致内源磷负荷加剧.洪泽湖西部和西南入湖流域应重点控制农田水土流失及养殖业面源污染,建设滨岸修复带,遵循少量多次增施有机肥原则,减少农用地水土流失.健全农村养殖业废水废渣处理;划定科学养殖区;提倡铜围网箱,增加水体交换率.而对于洪泽湖西北入湖流域则应重点防止过度城镇化带来的水土流失及对生态功能保护区过高的污染负荷.