Inertization of hazardous dredging spoils

Vitrification and production of ceramics materials starting from sediment excavated from Venice lagoon is described. This sediment is classified as toxic waste because contains several heavy metal ions and organic pollutants and was successfully vitrified at 1200-1350 degrees C. Twenty weight percentage of glass cullet, coming from a community glass recycling program, was added to the raw materials, previously calcined at 900 degrees C, as a way of adjusting the variations of composition of the individual sediment batches. Chemical durability (leaching) tests showed that the optimized glass compositions are inert, and thus not only volume reduction but also inertization of the waste was obtained by this process. Moreover, the economics of the entire process was analysed. The valorization of the waste was accomplished by the subsequent processing of the glass derived from the inertization. Glass ceramic materials were produced by viscous phase sintering of pressed glass powders which crystallized during the densification process. Sintered glass ceramic products had good mechanical characteristics (HV = 7.5 GPa, bending strength 150 +/- 8 MPa), making them suitable for applications in the building industry.     

Seasonal variations of heavy metals in central Greenland snow deposited from 1991 to 1995

To better assess the seasonality in the fallout of heavy metals to central Greenland, a continuous series of 68 snow samples has been collected at a remote site in the Summit area from a 2.7 m pit using ultraclean sampling procedures. This covers a continuous four year time period from spring 1991 to spring 1995. Co, Cu, Zn, Mo, Rh, Pd, Ag, Cd, Sb, Pt, Pb, Bi and U were determined using ultrasensitive inductively coupled plasma sector field mass spectrometry under clean room conditions. In addition we also determined Al by graphite furnace atomic absorption spectrometry and Na+, Ca2+, SO4(2-), MSA and oxalate by ion chromatography, species that will assist in the interpretation of the trace metal data. The data show pronounced inter- and intra-annual variations, with large differences in the amplitude of these variations for the element studied, with few clear seasonality patterns. Generally, high concentrations are observed in the spring snow layers, while much lower concentrations are typical of summer snow layers. Significant correlations are observed between Co, Cu, Zn, Ag and Sb, while Pt, Pd and Rh show no correlation with the other metals. Crustal enrichment factors show that while the crustal dust contribution is probably important for some metals for part of the year (spring), anthropogenic inputs are as important in many instances. Pronounced intra-annual variations are observed for some metals, in particular Pt. The variations observed for this metal parallel fairly closely changes in Russian Pt production, which points to emissions from smelters in the Russian Arctic as likely sources for Pt.     

Solid waste management in urban areas: Development and application of a decision support system

A decision support system (DSS) developed to assist the planner in decisions concerning the overall management of solid waste at a municipal scale is described. The DSS allows to plan the optimal number of landfills and treatment plants, and to determine the optimal quantities and the characteristics of the refuse that has to be sent to treatment plants, to landfills and to recycling. The application of the DSS is based on the solution of a constrained non-linear optimization problem. Various classes of constraints have been introduced in the problem formulation, taking into account the regulations about the minimum requirements for recycling, incineration process requirements, sanitary landfill conservation, and mass balance. The cost function to be minimized includes recycling, transportation and maintenance costs. The DSS has been tested on the municipality of Genova, Italy, and the results obtained are presented.     

mtDNA control region and D-HPLC analysis: a method to evaluate the mating system in Syngnathidae (Teleostei)

Mitochondrial DNA (mtDNA) has been used extensively in animals for phylogenetic and population studies but it has been applied only occasionally to mating systems analysis, where nuclear markers are usually preferred. We used denaturing-high performance liquid chromatography (D-HPLC) to detect mitochondrial DNA polymorphisms to assess the genetic mating system in Syngnathus abaster. Our study of ten pregnant males, revealed polygyny in 30% of the males, who carried embryos originating from multiple females. In addition, 30% of the pregnant males carried embryos with the same mitochondrial haplotype. This is not sufficient to demonstrate polyandry but allows a rapid selection and a reduced sample size for further studies. In conclusion, the proposed technique is time- and cost-effective, allows the certain identification of polygyny and provides useful information to study polyandry.     

Sperm removal and ejaculate size correlate with chelae asymmetry in a freshwater crayfish species

Asymmetry in traits of sexual relevance may impair copulation behaviour and sexual performance of males, ultimately resulting in a fitness cost. Freshwater crayfish males use chelae, a sexually selected trait, to secure and position the female prior to and during mating. Thus, a relatively large chelae asymmetry, resulting from accidental loss and regeneration of one cheliped after autotomy, could have great consequences for male sexual behaviour. We studied copulatory behaviour and sperm expenditure of males paired to a mated female in Austropotamobius italicus, a freshwater crayfish species where both male and female mate multiply and where last-mating males are able to actively remove previously deposited sperm. We aimed at assessing whether male sperm removal and expenditure varied according to sperm allocated by first-mating males, and according to copulation behaviour and phenotypic traits (carapace length, chelae length and relative chelae asymmetry) of second-mating males. Second-mating males did not adjust their ejaculate size in relation to first-mating male ejaculate, nor to the first-mating male’s sperm removed. Moreover, the amount of sperm removed by second-mating males increased with increasing first-mating males ejaculate size, and first-mating male sperm remaining after removal did not correlate with the original first-mating male ejaculate size. Interestingly, the amount of sperm removed by second-mating males decreased with increasing relative chelae asymmetry, while increasing with male body size. However, second-mating (but not first-mating) asymmetric-clawed males produced larger ejaculates than symmetric-clawed ones. Importantly, the proportion of second-mating male sperm remaining after the two matings did not vary with relative chelae asymmetry nor with body size of second-mating males. Thus, small, asymmetric-clawed crayfish males appear to adopt sperm allocation tactics that allow them to fully compensate for their inferior sperm removal ability.     

4-hours resolution data to study PM10 in a “hot spot” area in Europe

Nowadays, high-time resolved aerosol studies are mandatory to better understand atmospheric processes, such as formation, removal, transport, deposition or chemical reactions. This work focuses on PM10 physical and chemical characterisation with high-time resolution: elements (from Na to Pb), ions and OC/EC fractions concentration were determined during two weeks in summer and two in winter 2006 with 4-hours resolution. Further measurements aimed at hourly elemental characterisation of fine and coarse fractions and at the determination of particles number concentration in the 0.25-32 microm size range in 31 bins. The chemical mass closure was carried out in both seasons, enhancing intra-day differences in PM10 composition. In Milan, the highest contribution came from organic matter (34% and 33% in summer and winter, respectively); other important contributors were secondary inorganic compounds (16% and 24% in summer and winter, respectively) and, in summer, crustal matter (14%). Temporal trends showed strong variations in PM10 composition during contiguous time-slots and diurnal variations in different components contribution were identified. Moreover, peculiar phenomena, which would have hardly been detected with 24-hours samplings, were evidenced. Particles removal due to precipitations, aerosol local production and long range transport were studied in detail.     

Molecular phylogeography of two Italian sibling species of Calobius (Coleoptera, Hydraenidae, Ochthebiinae) inhabiting Mediterranean marine rock-pools

Marine rock-pools, commonly found along the Mediterranean coasts, are isolated patches of habitat characterised by large spatial and temporal variations. The phylogeography of Calobius quadricollis and C. urbanelliae, two sibling species of moss beetles (Coleoptera, Hydraenidae) inhabiting Italian temporary marine rock-pool ecosystems, were studied using mitochondrial cytochrome c oxidase subunit I (COI). Our data suggest a strong association between the scored genetic variability and the geographical distribution of populations sampled for both species. These analyses provided evidences of episodic species range expansion and fragmentation, recurrent “flush and crash” and bottleneck episodes probably occurring during the Glacial Cycles. The observed phylogeographical pattern is probably related to the historical and biogeographical processes of Mediterranean areas, as well as both to the ephemeral habitat tipology and limited dispersal ability of these beetles.     

Seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk from a high altitude pasture in the Italian Alps

The seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk was studied in a high altitude pasture in the Alps (1900 m a.s.l.). PCB contamination in vegetation shows a concentration peak in June, which is mainly interpreted as the consequence of a temporary PCB enrichment of the air layer above the ground due to net emission fluxes from the soil. A three compartment dynamic model was developed to test this hypothesis. The North/South enrichment factor in the vegetation was 1.5-1.6 for penta- and hexa-substituted congeners and 1.7 for hepta- and octa-PCBs, according to the effect of temperature on compounds having higher K_oa values. Milk concentrations followed the vegetation seasonal trend. The congener abundance in milk is in agreement with the biotransformation susceptibility, absorption efficiency and residence time of the different congeners in dairy cows.     

Organotins in the sediments of the Zuari estuary, west coast of India

Industrial use of organotins such as butyltins and phenyltins has increased several folds during the last two decades. Butyltins and phenyltins are synthetic, multipurpose chemicals, which have been extensively used in marine antifouling paints. They have been known to be extremely poisonous to mollusc fishery resources (oysters, clams, etc.). Contamination of Zuari estuary sediments was assessed by quantitative determination of butyltins and phenyltins by using GC-MS using the electron ionization mode. Butyltins predominated in the whole area over phenyltins. Butyltins contributed about 70-90% of the organotins in general. The concentration of butyltins in sediments ranged from 20 to 7621 ng Sn/g. The concentration of phenyltins in sediments ranged from 0 to 46 ng Sn/g. Degradation indices for butyltins and phenyltins were calculated. The Butyltin degradation index (BDI) for the Zuari sediments ranged from 0 to 2.7 indicating a lot of fresh input of butyltins in the estuary and a lower degradation rate. The phenyltin degradation index (PhDI) ranged from 1 to 10 implying that different processes were prevalent at different stations. The observed organotin levels in the Zuari estuary indicate some highly localized areas of contamination which are severe enough to cause harmful effects on marine flora and fauna. Therefore, there is a need to regulate the use of butyltins and phenyltins as biocides in marine antifouling paints.