Monitoring and assessment of airborne fungi in Kolkata, India, by viable and non-viable air sampling methods

The composition and variability of airborne fungal spores were studied using two complementary sampling methods in an outdoor environment in Kolkata suburb for 2 years, from November 2002 to October 2004. For monitoring the total fungal spore burden in the air, Burkard 7-day volumetric sampler was used, whereas Andersen two-sage viable sampler was used for isolating the cultivable airborne fungi. Among the 37 fungal spore types identified in the air samples, the predominant ones were Cladosporium, unidentified ascospores, unidentified basidiospores, Aspergilli/Penicilli, Nigrospora, Periconia, Chaetomium, Drechslera, Alternaria, Coprinus, Ganoderma, Pithomyces, and rust spores. Only six fungal spore types (Alternaria, Aspergilli/Penicilli, Cladosporium, Curvularia, Drechslera, and Nigrospora) were recovered in common by the two samplers. For Aspergilli/Penicilli, Drechslera, and Nigrospora, the spore concentration was underestimated in the non-viable sampling method (Burkard sampler). In general, higher spore count was recorded in winter. The highest fungal species variability was observed in early monsoon (June). Relative humidity could significantly predict the seasonal periodicity of the maximum number of airborne spores. The total airborne fungi concentration recorded in the study (15-16?×?10(3) spores m(-3) of air) was lower than the proposed threshold limit value for clinical significance, suggesting apparently no or less airborne-fungi-exposure-related health risk in the sampling area. Cladosporium cladosporioides was recorded beyond the proposed threshold limit value in January 2003 and March 2004; Aspergillus fumigatus and Aspergillus nidulans in winter that might have posed considerable health risk to sensitized individuals.     

Association between road traffic noise and prevalence of coronary heart disease

There is an established evidence that exposure to high levels of road traffic noise is associated with elevated risk of coronary heart disease (CHD). The results however have been heterogeneous and mostly inconclusive. The present investigation aimed to examine this association in adult subjects, with a secondary aim of identifying potentially vulnerable sub-populations. Similar studies have never been reported from Indian population. For exposure assessment, the time-weighted road traffic noise indicator, L _den, was used as a continuous and categorical predictor. A cross-sectional study was designed, and sociodemographic and lifestyle- and health-related characteristics were recorded for 909 (533 females and 376 males) subjects aged 18–80 years. The respondents living in areas with L _den?<?60 dB(A) were designated as the reference group. Odds for self-reported CHD in relation to traffic noise exposure were estimated by univariate and multifactorial logistic regression with adjustments for potential confounders and effect modifiers. The adjusted odds ratio (OR) for self-reported CHD was 1.72 (95 % CI 1.36–2.19) per 5 dB(A) increase of L _den (range 55–80 dB(A)). A gender-related risk difference was observed among male (OR 1.47 (1.07–2.02)) and female (OR 1.83 (1.27–2.65)) respondents. A stronger effect for subjects in the age group 55–64 years old was found, with age, residence period, body mass index, and self-reported stress being significant confounders. This study suggests epidemiological evidence that exposure to road traffic noise of L _den?>?65 dB(A) may be associated with occurrence of CHD in adult subjects. A trend was observed indicating increasing risk with higher exposure levels. The study results are also suggestive of higher risk of outcome among those with other chronic ailments (diabetes, pulmonary, or renal issues) and residing in the same location in excess of 15 years. Orientation of bedroom windows was identified as a significant effect modifier.     

An assessment to prioritise the critical erosion-prone sub-watersheds for soil conservation in the Gumti basin of Tripura,North-East India

Erosion-induced land degradation problem has emerged as a serious environmental issue across the world. Assessment of this problem through modelling can generate valuable quantitative information for the planners to identify priority areas for proper soil conservation measures. The Gumti River basin of Tripura falls under humid tropical climate and experiences soil erosion for a prolonged period which has turned into a major environmental issue. Increased sediment supply through top soil erosion is one of the major reasons for reduced navigability of this river. Thus, the present study is an attempt to prioritize the sub-watersheds of the Gumti basin by estimating soil loss through the USLE (Universal Soil Loss Equation) model. For that purpose, five parameters of the USLE model were processed, computed and overlaid in a GIS environment. The result shows that potential mean annual soil loss of the Gumti basin ranges between 0.03 and 114.08 t ha^?1 year^?1. The resultant values of soil loss were classified into five categories considering the minimum and maximum values. It has been identified that low, moderate, high, very high and severe soil loss categories occupy 68.71, 8.94, 5.86, 5.02 and 11.47% of the basin respectively. Moreover, it has been recognised that sub-watersheds like SW7, SW8, SW12, SW21, SW24 and SW29 fall under very high priority class for which mitigation measures are essential. Therefore, the present study recommends mitigation measures through terrace cultivation, as an alternative of shifting cultivation in the hilly areas and through construction of check dams at the appropriate sites of the erosion prone sub-watersheds. Moreover, proper afforestation programmes that have been implemented successfully in other parts of Tripura through the Japan International Cooperation Agency, Joint Forest Management, and National Afforestation Programme should be initiated in the highly erosion-prone areas of the Gumti River basin.     

民用燃煤含碳颗粒物的排放因子测量

通过烟尘罩稀释通道系统采样,实验室模拟民用燃煤的燃烧方式,获取了不同成熟度的散煤、蜂窝煤的PM2.5、EC和OC的排放因子.民用燃煤的排放与煤炭成熟度有很大相关,不同煤种排放因子差距很大.在6种实验煤炭中,烟煤散烧的排放因子较大,其中S3煤种的排放因子最大,其PM2.5、EC和OC的实测值分别为11.06、3.51和5.39 g·kg-1;无烟煤散烧排放因子较少,S1煤种的排放因子最小,其PM2.5、EC和OC分别为0.78、0.02和0.49 g·kg-1;蜂窝煤的颗粒物以及OC排放因子与相似成熟度的散煤燃烧相当,但是EC排放相对散煤较低.EC、OC源清单工作需要对民用燃煤源进行更详细的分类,结合相应的排放因子,才能更加准确的估计这一重要排放源的贡献率.     

Blood dynamics of mercury and selenium in northern elephant seals during the lactation period

The effects of reproduction and maternal investment (i.e., milk transfer) on trace element levels remain poorly understood in marine mammals. We examined the blood dynamics of mercury (Hg) and selenium (Se) during lactation in the northern elephant seal (Mirounga angustirostris), a top predator from the North Pacific Ocean. Total Hg and Se levels were measured in whole blood and milk of 10 mother-pup pairs on days 5 and 22 of lactation. Both Hg and Se were transferred to offspring through the milk. Results suggested that the maternal transfer of Se was prominent during lactation, whereas the Hg transfer was larger during gestation. The lactation period affected Hg and Se levels in the blood of elephant seal mothers and pups. Physiological processes and their relationship to body condition should be considered carefully when interpreting trace element levels in the framework of biomonitoring.     

Evaluation of environmental magnetic pollution screening in soils of basaltic origin: results from Nashik Thermal Power Station, Maharashtra, India

Background, aim, and scope

Soils of basaltic origin cause difficulties in environmental magnetic screening for heavy metal pollution due to their natural high background values. Magnetic parameters and heavy metal content of highly magnetic topsoils from the Deccan Trap basalts are investigated to assess their potential for use in environmental magnetic pollution screening. This work extends the fast and cost-effective magnetic pollution screening techniques into soils with high natural magnetic signals.

Materials and methods

Fifty-five topsoil samples from N?CS and W?CE transects were collected and subdivided according to grain size using wet sieving technique. Magnetic susceptibility, soft isothermal remanent magnetization (Soft IRM), thermomagnetic analysis, scanning electron microscopy (SEM), and heavy metal analysis were performed on the samples.

Results

Magnetic analyses reveal a significant input of anthropogenic magnetic particulate matter within 6 km of the power plant and the adjacent ash pond. Results depend strongly on the stage of soil development and vary spatially. While results in the W, E, and S directions are easily interpretable, in the N direction, the contribution of the anthropogenic magnetic matter is difficult to assess due to high magnetic background values, less developed soils, and a more limited contribution from the fly ash sources. Prevailing winds towards directions with more enhanced values seem to have a certain effect on particulate matter accumulation in the topsoil. Thermomagnetic measurements show Verwey transition and Hopkinson peak, thus proving the presence of ferrimagnetic mineral phases close to the pollution source. A quantitative decrease of the anthropogenic ferrimagnetic mineral concentration with increased distance is evident in Soft IRM measurements. SEM investigations of quantitatively extracted magnetic particles confirm the fly ash distribution pattern obtained from the magnetic and heavy metal analyses. Evaluation of magnetic and chemical data in concert with the Pollution Load IndiceS (PLIS) of Pb, Zn, and Cu reveals a good relationship between magnetic susceptibility and the metal content.

Conclusions

Integrated approaches in data acquisition of magnetic and chemical parameters enable the application of magnetic screening methods in highly magnetic soils. Combined data evaluation allows identification of sampling sites that are affected by human activity, through the deviation of the magnetic and chemical data from the general trend. It is shown that integrative analysis of magnetic parameters and a limited metal concentration dataset can enhance the quality of the output of environmental magnetic pollution screening significantly.     

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Microbial siderophores and their potential applications: a review

Siderophores are small organic molecules produced by microorganisms under iron-limiting conditions which enhance the uptake of iron to the microorganisms. In environment, the ferric form of iron is insoluble and inaccessible at physiological pH (7.35–7.40). Under this condition, microorganisms synthesize siderophores which have high affinity for ferric iron. These ferric iron-siderophore complexes are then transported to cytosol. In cytosol, the ferric iron gets reduced into ferrous iron and becomes accessible to microorganism. In recent times, siderophores have drawn much attention due to its potential roles in different fields. Siderophores have application in microbial ecology to enhance the growth of several unculturable microorganisms and can alter the microbial communities. In the field of agriculture, different types of siderophores promote the growth of several plant species and increase their yield by enhancing the Fe uptake to plants. Siderophores acts as a potential biocontrol agent against harmful phyto-pathogens and holds the ability to substitute hazardous pesticides. Heavy-metal-contaminated samples can be detoxified by applying siderophores, which explicate its role in bioremediation. Siderophores can detect the iron content in different environments, exhibiting its role as a biosensor. In the medical field, siderophore uses the “Trojan horse strategy” to form complexes with antibiotics and helps in the selective delivery of antibiotics to the antibiotic-resistant bacteria. Certain iron overload diseases for example sickle cell anemia can be treated with the help of siderophores. Other medical applications of siderophores include antimalarial activity, removal of transuranic elements from the body, and anticancer activity. The aim of this review is to discuss the important roles and applications of siderophores in different sectors including ecology, agriculture, bioremediation, biosensor, and medicine.     

Removal of Pb(II) ions from aqueous solution and industrial effluent using natural biosorbents

Purpose

The purpose of the research is to investigate the applicability of the low-cost natural biosorbents for the removal of Pb(II) ions from aqueous solution and effluent from battery industry.

Methods

Six different biosorbents namely rice straw, rice bran, rice husk, coconut shell, neem leaves, and hyacinth roots have been used for the removal of Pb(II) ions from aqueous solution in batch process. All the biosorbents were collected from local area near Kolkata, West Bengal, India. The removal efficiency was determined in batch experiments for each biosorbent.

Results

The biosorbents were characterized by SEM, FTIR, surface area, and point of zero charge. The sorption kinetic data was best described by pseudo-second-order model for all the biosorbents except rice husk which followed intraparticle diffusion model. Pb(II) ions adsorption process for rice straw, rice bran, and hyacinth roots were governed predominately by film diffusion, but in the case of rice husk, it was intraparticle diffusion. Film diffusion and intraparticle diffusion were equally responsible for the biosorption process onto coconut shell and neem leaves. The values of mass transfer coefficient indicated that the velocity of the adsorbate transport from the bulk to the solid phase was quite fast for all cases. Maximum monolayer sorption capacities onto the six natural sorbents studied were estimated from the Langmuir sorption model and compared with other natural sorbents used by other researchers. The Elovich model, the calculated values of effective diffusivity, and the sorption energy calculated by using the Dubinin?CRadushkevich isotherm were indicated that the sorption process was chemical in nature. The thermodynamic studies indicated that the adsorption processes were endothermic. FTIR studies were carried out to understand the type of functional groups responsible for Pb(II) ions binding process. Regeneration of biosorbents were carried out by desorption studies using HNO₃. Battery industry effluents were used for the application study to investigate applicability of the biosorbents.

Conclusion

The biosorbents can be utilized as low-cost sorbents for the removal of Pb(II) ions from wastewater.