Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalysts

Cracking, steam reforming, dry reforming, and combined steam and dry reforming of toluene in model syngas were performed using catalysts to simulate tar removal produced during biomass gasification. The catalysts were prepared by adding Ru, Ca, and Mn to Ni-based catalysts, and their properties were measured using BET, pulse CO chemisorption, XRD and TG. In steam and dry reforming of toluene, a high toluene conversion was observed with increasing Ca content in the catalyst and catalysts containing Ca showed a higher activity than those containing Mn. In combined steam-dry reforming with syngas, 1%CaNiRu/Al₂O₃ indicated a conversion of 93.9% at 800°C.     

Analysis of the association between air pollution and allergic diseases exposure from nearby sources of ambient air pollution within elementary school zones in four Korean cities

The objectives of this study were to survey elementary school students regarding the environmental conditions of their elementary schools and to assess the relationship between air pollution and allergic disease using the International Study of Asthma and Allergies in Childhood (ISAAC) questionnaire. Therefore, this study was designed as a cross-sectional study. In this study, seven elementary schools were selected and they were classified into three categories. The selection included one school with no traffic-related or other pollutants, three with traffic-related pollutants, and three with traffic-related and other pollutants from industrial and filling station sources. The ISAAC questionnaire survey was given to all of the students except to those in the 1st grade who were presumed to be less likely to be exposed to the school environment than the remainder of the students attending those seven schools. The assessment of allergic disease was conducted on a total of 4,545 students. Three school zones with critical exposure were selected within each school and they were evaluated based on the levels of black carbon (BC), PM₁₀, SO₂, NO₂, and O₃. There was a significant increase in the risks based on the odds ratios of treatment experiences (within 1 year) for allergy-related diseases such as asthma and allergic rhinitis (a) in the school group with traffic-related pollutants and the school group with complex pollutants were 2.12 (1.41–3.19) and 1.59 (1.06–2.37), respectively, in comparison to the school groups with no exposure to pollutants. This was determined based on the odds ratio of symptoms and treatment experiences for allergy-related diseases by group based on the home town zone as a reference. Also, in the case of atopic dermatitis, the odds ratio of treatment experiences (within 1 year) was 1.42 (1.02–1.97), which indicated elevated risks compared to the students in the S1 school. A regression analysis was used to assess the relationship between the substances and the symptomatic experiences within the last year. There were significant increases in the odds ratio of the symptoms associated with allergic rhinitis and the BC and SO₂ in the complex pollution areas. The results of the assessment of the relationship between atopic dermatitis-associated symptoms and O3 showed that the odds ratio increased with statistical significance.     

Comparison of fenton and photo-fenton processes for livestock wastewater treatment

In this study, the photochemical degradation of livestock wastewater was carried out by the Fenton and Photo-Fenton processes. The effects of pH, reaction time, the molar ratio of Fe(2 +)/H(2)O(2), and the Fe(2 +) dose were studied. The optimal conditions for the Fenton and Photo-Fenton processes were found to be at a pH of 4 and 5, an Fe(2 +) dose of 0.066 M and 0.01 M, a concentration of hydrogen peroxide of 0.2 M and 0.1 M, and a molar ratio (Fe(2 +)/H(2)O(2)) of 0.33 and 0.1, respectively. The optimal reaction times in the Fenton and Photo-Fenton processes were 60 min and 80 min, respectively. Under the optimal conditions of the Fenton and Photo-Fenton processes, the chemical oxygen demand (COD), color, and fecal coliform removal efficiencies were approximately 70--79, 70--85 and 96.0--99.4%, respectively.     

Perchlorate in fish from a contaminated site in east-central Texas

Perchlorate, a known thyroid endocrine disruptor, contaminates surface waters near military instillations where solid fuel rocket motors are manufactured or assembled. To assess potential perchlorate exposure to fish and the human population which may feed on them, fish were collected around the Naval Weapons Industrial Reserve Plant in McLennan County, TX, and analyzed for the presence of the perchlorate anion. The sampling sites included Lake Waco and Belton Lake, and several streams and rivers within their watersheds. The general tendency was that perchlorate was only found in a few species sampled, and perchlorate was not detected in every individual within these species. When detected in the fish, perchlorate tissue concentrations were greater than that in the water. This may be due to highly variable perchlorate concentrations in the water coupled with individual-level variation in elimination from the body, or to routes of exposure other than water.     

Applications of Satellite Remote Sensing to Marine Pollution Studies

There are two approaches in the application of satellite sensors to marine pollution studies. Satellite sensors are used to observe and characterize ocean pollutants such as industrial wastes and oil. in addition, satellite observations provide information useful in illuminating processes such as eutrophi-cation or air-sea exchange of CO₂, that are important in determining the distribution and fate of pollutants.

Satellite technology is an important tool in monitoring and studying ocean pollution. Visible sensors have been used to observe and characterize sewage sludge and industrial wastes dumped at sea. Oil slicks have been observed with Landsat, AVHRR and SAR imagery. Besides directly detecting pollutants, satellite sensors are useful for analyzing ocean processes that are influential in the fate of pollutants. These processes include eutrophication of coastal waters and the distribution of suspended matter. the fate of excess CO₂ can be addressed using scatterometer-derived estimates of wind speeds to determine the CO₂ exchange coefficient at the sea surface on a global scale.     

Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

Comparison of seven indicator PCBs and three coplanar PCBs in beef, pork, and chicken fat

The risk assessment of polychlorinated biphenyls (PCBs) is difficult since complex congeners were used in many industrial applications for a long period of time and the residue monitoring in foods of animal origin and the environment were not established in comparable systems. The relationships of determined concentrations in indicator PCB congeners (mono- and di-ortho PCBs) and coplanar PCB congeners (non-ortho PCBs) in livestock products are presented in this study. The concentrations of seven indicator PCBs were compared with three coplanar PCBs in beef, pork, and chicken fat. Distributions of concentration for the indicator PCBs in three different animal species were similar except for that of PCB-118 (2,3',4,4',5-pentachlorobiphenyl) in pork fat. The congeners with the highest concentration were PCB-138 (2,2',3,4,4',5'-hexachlorobiphenyl) in beef and pork fat and PCB-28 (2,4,4'-trichlorobiphenyl) in chicken fat. The bioaccumulation and metabolism of PCBs in animal species represent different congener profiles in livestock products. The percentage of the total concentration of three coplanar PCBs was about 2% of the total concentration of the seven indicator PCBs. Relatively high concentration of mono-ortho and di-ortho PCBs in fat samples of livestock products may be calculated with the concentration of coplanar PCBs that can be usually determined on a sequential procedure with dioxin analysis. Therefore, the relationship of the amounts between seven indicator PCBs and three coplanar PCBs may be useful to derive the composition and level of contaminants in beef, pork, and chicken.     

Distribution characteristics of nonylphenols in the artificial Lake Shihwa, and surrounding creeks in Korea

Nonylphenols were determined from the water, suspended particle, and sediment samples taken from the Lake Shihwa in Korea and its surrounding creeks flowing through municipal and industrial areas, and into the lake. The nonylphenols were detected at the concentration ranges of 0.0-41.3 microg/l, 0.0-116.6 and 0.3-31.7 mg/kg in water, suspended particle and sediment samples respectively. The contamination levels of nonylphenols were increased along the down stream. Considerably high levels of nonylphenols were found at the industrial area compared to the municipal area. No remarkable differences were found between the isomer patterns of nonylphenols for the sample matrices of each sampling site, i.e. water, suspended solids and sediment. Strong correlations between water and sediment with 10(5.2) of the mean partition coefficient (Koc ) were observed. These indicate that most of nonylphenols came from industrial wastewater at high level. It is thought that the water quality of the Lake Shihwa is affected greatly by industrial environments surrounding.