Heavy metal contamination in river water and sediments of the Swarnamukhi River Basin,India: risk assessment and environmental implications

The concentration of heavy metals was analyzed each of 20 river water, suspended sediments and bed sediments along the stretch of Swarnamukhi River Basin. River water is not contaminated with heavy metals except Fe and Mn. Contamination factor in sediments shows considerable to very high degree contamination with Cr, Cu, Pb and Zn. The sources of these metals could be residential wastes, sewer outfall, fertilizers, pesticides (M-45 + carbondine) and traffic activities apart from natural weathering of granitic rocks present in the basin area. Principal component analyses indicate the interaction between metals in different media. The comparison of metals (Cu, Pb and Zn) in bed sediments of Swarnamukhi River with the Indian and world averages indicates that the values obtained in the basin are above the Indian averages and far below to the world averages. Average shale values and sediment quality guidelines point toward the enrichment and contamination of Cu, Cr, Pb and Zn to several fold leading to eco-toxicological risks in basin.     

Community assembly in the presence of disturbance: a microcosm experiment

Ecologists know relatively little about the manner in which disturbance affects the likelihood of alternative community stable states and how the history of community assembly affects the relationship between disturbance and species diversity. Using microbial communities comprising bacterivorous ciliated protists assembled in laboratory microcosms, we experimentally investigated these questions by independently manipulating the intensity of disturbance (in the form of density-independent mortality) and community assembly history (including a control treatment with simultaneous species introduction and five sequential assembly treatments). Species diversity patterns consistent with the intermediate disturbance hypothesis emerged in the controls, as several species showed responses indicative of a tradeoff between competitive ability and ability to recover from disturbance. Species diversity in communities with sequential assembly, however, generally declined with disturbance, owing to the increased extinction risk of later colonizers at the intermediate level of disturbance. Similarities among communities subjected to different assembly histories increased with disturbance, a result due possibly to increasing disturbance reducing the importance of competition and hence priority effects. This finding is most consistent with the idea that increasing disturbance tends to reduce the likelihood of alternative stable states. Collectively, these results indicate the strong interactive effects of disturbance and assembly history on the structure of ecological communities.     

Inherently safer design of solvent processes at the conceptual stage: Practical application for substitution

The implementation of inherently safer design concepts is considered beneficial to avoid hazards during early stages of design. The application of existing process design and modeling techniques that aid ‘substitution’, ‘intensification’ and ‘attenuation’ has been shown in this work. The techniques have been applied to solvent processes because of the inherent hazards associated with them, such as large inventories, and presence of highly toxic and flammable materials. For ‘substitution’, computer aided molecular design technique has been applied to select inherently safer solvents for a solvent operation. For ‘intensification’ and ‘attenuation’, consequence models and regulatory guidance from EPA RMP have been integrated into process simulation. Combining existing techniques provides a design team with a higher level of information to make decisions based on process safety. A case study has been shown for liquid extraction of acetic acid–water mixture. Suitable solvents were identified using ICAS 11.0-ProCAMD, and consequence models were integrated into Aspen plus simulator using a calculator sheet. Solvents such as 5-nonanone, 2-nonanone and 5-methyl-2-hexanone provide inherently safer options, but conventionally-used solvent, ethyl acetate, provides higher degree of separation capability. A conclusive decision regarding feasible solvents and operating conditions would depend on design requirements, regulatory guidance, and safety criteria specified for the process. Inherent safety has always been an important consideration to be implemented during early design steps, and this paper presents a methodology to incorporate the principles and to obtain inherently safer alternatives.     

A quantitative investigation of methane gas and solid waste management in mountainous Srinagar city-A case study

Journal of Material Cycles and Waste Management - Methane has tremendous potential for energy production, and enormous amounts of energy can be produced using suitable technology. To address this...     

Elevated land runoff after European settlement perturbs persistent foraminiferal assemblages on the Great Barrier Reef

Coral reefs are under pressure from a variety of human-induced disturbances, but demonstration of ecosystem changes and identification of stressors are often difficult. We tested whether global change or increased agricultural runoff after European settlement of Northeast Australia (ca. 1860) has affected inshore reefs of the Great Barrier Reef. Eleven sediment cores were retrieved from inner reefs, intermediate reefs, and outer-island reefs, and benthic foraminiferal assemblages were analyzed in dated (14C, 210Pb, 137Cs) core sections (N = 82 samples). Data were grouped into six age bands (< 55, 55-150, 150-500, 500-1000, 1000-1500, and > 1500 yr). Principal component analysis and two-factor (Zone and Age) permutational analysis of variance (PERMANOVA) suggested that assemblages from the three zones were significantly different from each other over several millennia, with symbiont-bearing (mixotrophic) species dominating the outer reefs. A significant interaction term indicated that within-zone patterns varied. Assemblages in outer reefs unaffected from increased land runoff were persistent until present times. In both other zones, assemblages were also persistent until 150 yr ago, suggesting that benthic foraminiferal assemblages are naturally highly persistent over long (> 2000 yr) timescales. Assemblages in core sections < 55 yr old from inner reefs were significantly (post hoc t test) different from those older than 150 yr. Similarly, assemblages < 55 yr old from intermediate reefs were significantly different compared to older assemblages. A multivariate regression tree (environmental variables: Zone and Age) explained 56.8% of the variance in foraminiferal assemblages and confirmed patterns identified by PERMANOVA. With some exceptions, changes on the inner and intermediate reefs were consistent with a model predicting that increased nutrients and higher turbidity enhance relative abundance of heterotrophic species. Given that assemblages did not change in outer-island reefs (not impacted by runoff) we argue that changes in assemblages due to global change can be rejected as an explanation. Thus, the findings are more consistent with the hypothesis that agricultural runoff since European settlement altered foraminiferal assemblages than with the hypothesis that global forcing caused changes.     

Concentration of nitrite in respirable particulate matter of ambient air in Vadodara, Gujarat, India

Water extract of respirable particulate matter (RPM) was analyzed by Ion chromatography technique to investigate the presence of nitrite (NO2) as secondary aerosol in ambient environment. The nitrite particulates undergo photo hydroxyl radical reaction in environment produce nitrous acid, which reacts with metal and absorbs on RPM as water-soluble metal salt. The mean concentration of nitrite was 20.86 microg m(-3) in ambient environment. Regression analysis showed that the relationship for respirable particulate matter and nitrite (RPM-NO2, R2 = 0.742) was positively significant. We are reporting the presence of nitrite as an aerosol in ambient environment.     

Spatial and temporal variations in traffic-related particulate matter at New York City high schools

Relatively little is known about exposures to traffic-related particulate matter at schools located in dense urban areas. The purpose of this study was to examine the influences of diesel traffic proximity and intensity on ambient concentrations of fine particulate matter (PM_2.5) and black carbon (BC), an indicator of diesel exhaust particles, at New York City (NYC) high schools. Outdoor PM_2.5 and BC were monitored continuously for 4–6 weeks at each of 3 NYC schools and 1 suburban school located 40 km upwind of the city. Traffic count data were obtained using an automated traffic counter or video camera. BC concentrations were 2–3 fold higher at urban schools compared with the suburban school, and among the 3 urban schools, BC concentrations were higher at schools located adjacent to highways. PM_2.5 concentrations were significantly higher at urban schools than at the suburban school, but concentrations did not vary significantly among urban schools. Both hourly average counts of trucks and buses and meteorological factors such as wind direction, wind speed, and humidity were significantly associated with hourly average ambient BC and PM_2.5 concentrations in multivariate regression models. An increase of 443 trucks/buses per hour was associated with a 0.62 μg/m³ increase in hourly average BC at an NYC school located adjacent to a major interstate highway. Car traffic counts were not associated with BC. The results suggest that local diesel vehicle traffic may be important sources of airborne fine particles in dense urban areas and consequently may contribute to local variations in PM_2.5 concentrations. In urban areas with higher levels of diesel traffic, local, neighborhood-scale monitoring of pollutants such as BC, which compared to PM_2.5, is a more specific indicator of diesel exhaust particles, may more accurately represent population exposures.     

Removal efficiency of fluoride by novel Mg-Cr-Cl layered double hydroxide by batch process from water

The fluoride ion removal from aqueous solution using synthesized Mg-Cr-Cl layered double hydroxide has been reported.Mg-Cr-Cl was characterized by X-ray powder diffraction,Fourier-transform infrared,thermo-gravimetric analysis,differential thermal analysis,and scanning electron microscope.Adsorption experiments were carried out in batch mode as a function of adsorption dosages,contact time,pH,and initial fluoride concentration to get optimum adsorption capacity.The adsorption kinetic study showed that the adsorption process followed first order kinetics.The fluoride removal was 88.5% and 77.4% at pH 7 with an adsorbent dose of 0.6 g/100 mL solution and initial fluoride concentration of 10 mg/L and 100 mg/L,respectively.The equilibrium was established at 40 min.Adsorption experiment data were fitted well with Langmuir isotherm with R 2 = 0.9924.Thermodynamic constants were also measured and concluded that the adsorption process was spontaneous and endothermic in nature.The removal percentage decreased slowly with increasing pH.This process is suitable for industrial effluents.The regeneration of the material is not possible.