Lichens reveal air PAH fractionation in the Himalaya

This paper shows that gas/particulate phase partitioning of polycyclic aromatic hydrocarbons (PAHs) can be monitored using lichens. Anthropogenic sources are responsible for the release of PAHs, which are bioaccumulated in plants at various spatial scales based on their physicochemical properties. Atmospheric PAHs are distributed both in the gaseous and particulate states. Here, a lichen species, Dermatocarpon vellereum Zschacke, has been collected at different altitudes in and around the Rudraprayag valley, located in Central Himalayan region of India, in order to study the spatial distribution of PAHs in the valley. Results show that PAH concentration ranged from 0.136 to 4.96 μg g^?1. Findings reveal that the bioaccumulation of 2- and 3-ringed PAHs was higher in high-altitude samples, whereas bioaccumulation of fluoranthene, a 4-ringed PAH, showed higher concentration in samples from localities away from town centre. 5- and 6-ring PAHs were then confined to the lower altitude at the base of the valley, thus justifying their particulate-bound nature. This is the first report showing the utility of lichen to biomonitor PAHs in the Himalayan ecosystem.     

Lichens to distinguish urban from industrial PAHs

This paper shows that lichens can be used as biomonitors to distinguish urban from industrial polycyclic aromatic hydrocarbons (PAHs). PAHs are atmospheric pollutants originating mainly from incomplete combustion of fuels in vehicles and industry. The occurrence of PAHs in air is a serious health issue in urban areas and industrial areas because some PAHs are carcinogenic. Biomonitoring PAHs with lichens is generally applied for quantification of PAHs. However, the precise sources of PAHs are not well known. Here we use lichen to trace the source of PAHs. PAHs were analyzed in Pyxine subcinerea Stirton, a lichen species collected from twelve sites which vary from urban and industrial to periurban forest area of Haridwar, in the foothills of the Indian Himalayas. Total PAH concentration ranged between 1.25 and 187.3 μg g⁻¹. Results indicate a clear distinction between urban and industrial PAHs profile, using principal component analysis. Lichen sampled from industrial sites exhibited higher concentrations of two-, five-, and six-ringed PAHs, up to 60% of total PAHs, while samples from urban sites were dominated by four-ringed PAHs, predominantly fluoranthene and acenaphthylene. Molecular ratios indicate that combustion was the dominant source of origin of PAHs in industrial area, while urban sites showed mixed origin of PAHs, both pyro- and petrogenic.     

Economics and GHG emission reduction of a PLA bio-refinery system—Combining bottom-up analysis with price elasticity effects

This paper analyses energy savings, GHG emission reductions and costs of bio-refinery systems for polylactic acid (PLA) production. The systems comprise ‘multi-functional’ uses of biomass resources, i.e. use of agricultural residues for energy consumption, use of by-products, and recycling and waste-to-energy recovery of materials. We evaluate the performance of these systems per kg of bio-based polymer produced and per ha of biomass production. The evaluation is done using data of Poland assuming that biomass and PLA production is embedded in a European energy and material market. First, the performance of different bio-refinery systems is investigated by means of a bottom-up chain analysis. Second, an analysis is applied that derives market prices of products and land depending on the own-price elasticity of demand. Thus, the costs of bio-refinery systems depending on the demand of land and material are determined. It is found that all PLA bio-refinery systems considered lead to net savings of non-renewable energy consumption of 70–220 GJ/(ha yr) and net GHG emission reductions of 3–17 Mg CO_2eq/(ha yr). Most of these PLA bio-refinery systems lead to net costs for the overall system of up to 4600 €/(ha yr). PLA production from short rotation wood leads to net benefits of about 1100 €/(ha yr) if a high amount of a high value product, i.e. fibres, is produced. Multi-functionality is necessary to ensure the viability of PLA bio-refinery systems from biomass with regard to energy savings and GHG emission reduction. However, the multi-functional use of biomass does not contribute much to overall incomes. Multifunctional biomass use – especially the use of biomass residues for energy consumption – contributes significantly to savings of non-renewable energy sources. Own-price elasticity of the demand for materials influences the overall costs of the bio-refinery system strongly. The own-price elasticity of land demand markets could become important if bio-refineries are introduced on a large scale.     

Electrospun ZnO Nanoparticles Doped Core–Sheath Nanofibers: Characterization and Antimicrobial Properties

Coaxial electrospinning technique was used to fabricate the core–sheath composite nanofibers of ZnO nanoparticle (Nps) (10%, 20% w/w) doped polymethyl methacrylate (PMMA) (as sheath) and polyvinyl alcohol (PVA) (as core). Fourier transform infrared (FT-IR) spectra were confirmed the weak forces arise between ZnO Nps, PMMA and PVA matrixes. The hexagonal (wurtzite) structure of ZnO Nps with ~?30.8 nm of diameter was confirmed from the X-ray diffraction pattern. The morphology and microstructure of core–sheath composite nanofibers were confirmed from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is clearly seen from the TEM images that the PMMA encapsulate the PVA core. Core–sheath composite nanofibers were assessed against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria through quantitative, disk diffusion and viable cell count methods. It was found that ZnO Nps doped core–sheath nanofibers were effectively inhibit the growth of gram positive bacteria, B. subtilis.     

Protein futures for Western Europe: potential land use and climate impacts in 2050

Multiple production and demand side measures are needed to improve food system sustainability. This study quantified the theoretical minimum agricultural land requirements to supply Western Europe with food in 2050 from its own land base, together with GHG emissions arising. Assuming that crop yield gaps in agriculture are closed, livestock production efficiencies increased and waste at all stages reduced, a range of food consumption scenarios were modelled each based on different ‘protein futures’. The scenarios were as follows: intensive and efficient livestock production using today’s species mix; intensive efficient poultry–dairy production; intensive efficient aquaculture–dairy; artificial meat and dairy; livestock on ‘ecological leftovers’ (livestock reared only on land unsuited to cropping, agricultural residues and food waste, with consumption capped at that level of availability); and a ‘plant-based eating’ scenario. For each scenario, ‘projected diet’ and ‘healthy diet’ variants were modelled. Finally, we quantified the theoretical maximum carbon sequestration potential from afforestation of spared agricultural land. Results indicate that land use could be cut by 14–86 % and GHG emissions reduced by up to approximately 90 %. The yearly carbon storage potential arising from spared agricultural land ranged from 90 to 700 Mt CO₂ in 2050. The artificial meat and plant-based scenarios achieved the greatest land use and GHG reductions and the greatest carbon sequestration potential. The ‘ecological leftover’ scenario required the least cropland as compared with the other meat-containing scenarios, but all available pasture was used, and GHG emissions were higher if meat consumption was not capped at healthy levels.     

Persistence and risk assessment of spiromesifen on tomato in India: a multilocational study

Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg^?1, while the limit of determination was 0.015 mg kg^?1. Residues were found below the LOQ of 0.05 mg kg^?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg^?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment.     

Identification of polycyclic aromatic hydrocarbons in unleaded petrol and diesel exhaust emission

Inhalation of emissions from petrol and diesel exhaust particulates is associated with potentially severe biological effects. In the present study, polycyclic aromatic hydrocarbons (PAHs) were identified from smokes released by the automobile exhaust from petrol and diesel. Intensive sampling of unleaded petrol and diesel exhaust were done by using 800-cm³ motor car and 3,455-cm³ vehicle, respectively. The particulate phase of exhaust was collected on Whatman filter paper. Particulate matters were extracted from filter paper by using Soxhlet. PAHs were identified from particulate matter by reverse phase high performance liquid chromatography using C₁₈ column. A total of 14 PAHs were identified in petrol and 13 in case of diesel sample after comparing to standard samples for PAH estimation. These inhalable PAHs released from diesel and petrol exhaust are known to possess mutagenic and carcinogenic activity, which may present a potential risk for the health of inhabitants.     

Occurrence of phthalic acid esters in Gomti River Sediment, India

Cadmium and lead are important environmental pollutants with high toxicity to animals and human. Soils, though have considerable metal immobilizing capability, can contaminate food chain via plants grown upon them when their built-up occurs to a large extent. Present experiment was carried out with the objective of quantifying the limits of Pb and Cd loading in soil for the purpose of preventing food chain contamination beyond background concentration levels. Two separate sets of pot experiment were carried out for these two heavy metals with graded levels of application doses of Pb at 0.4–150 mg/kg and Cd at 0.02–20 mg/kg to an acidic light textured alluvial soil. Spinach crop was grown for 50 days on these treated soils after a stabilization period of 2 months. Upper limit of background concentration levels (C _ul) of these metals were calculated through statistical approach from the heavy metals concentration values in leaves of spinach crop grown in farmers’ fields. Lead and Cd concentration limits in soil were calculated by dividing C _ul with uptake response slope obtained from the pot experiment. Cumulative loading limits (concentration limits in soil minus contents in uncontaminated soil) for the experimental soil were estimated to be 170 kg Pb/ha and 0.8 kg Cd/ha. Based on certain assumptions on application rate and computed cumulative loading limit values, maximum permissible Pb and Cd concentration values in municipal solid waste (MSW) compost were proposed as 170 mg Pb/kg and 0.8 mg Cd/kg, respectively. In view of these limiting values, about 56% and 47% of the MSW compost samples from different cities are found to contain Pb and Cd in the safe range.     

Hydrogeochemical processes controlling the high fluoride concentration in groundwater: a case study at the Boden block area,Orissa, India

The present investigation reports the assessment of hydrochemical/geochemical processes controlling the concentration of fluoride in groundwater of a village in India (Boden block, Orissa). Boden block is one of the severely affected fluoride-contaminated areas in the state of Orissa (India). The sampling and subsequent analysis of water samples of the study area was carried out following standard prescribed methods. The results of the analysis indicate that 36.60% groundwater F⁻ concentration exceeds the limit prescribed by the World Health Organization for drinking water. The rock interaction with groundwater containing high concentration of HCO₃⁻ and Na⁺ at a higher pH value of the medium could be one of the important reasons for the release of F⁻ from the aquatic matrix into groundwater. Geochemical classification of groundwater based on Chadha rectangular diagram shows that most of the groundwater samples having fluoride concentration more than 1.5 mg L⁻¹ belongs to the Na-K-HCO₃ type. The saturation index values evaluated for the groundwater of the study area indicated that it is oversaturated with respect to calcite, whereas the same is undersaturated with respect to fluorite content. The deficiency of calcium ion concentration in the groundwater from calcite precipitation favors fluorite dissolution leading to excess of fluoride concentration. The risk index was calculated as a function of fluoride level in drinking water and morbidity of fluorosis categorizes high risk for villages of Amera and Karlakote panchayat of Boden block.