Elevated land runoff after European settlement perturbs persistent foraminiferal assemblages on the Great Barrier Reef

Coral reefs are under pressure from a variety of human-induced disturbances, but demonstration of ecosystem changes and identification of stressors are often difficult. We tested whether global change or increased agricultural runoff after European settlement of Northeast Australia (ca. 1860) has affected inshore reefs of the Great Barrier Reef. Eleven sediment cores were retrieved from inner reefs, intermediate reefs, and outer-island reefs, and benthic foraminiferal assemblages were analyzed in dated (14C, 210Pb, 137Cs) core sections (N = 82 samples). Data were grouped into six age bands (< 55, 55-150, 150-500, 500-1000, 1000-1500, and > 1500 yr). Principal component analysis and two-factor (Zone and Age) permutational analysis of variance (PERMANOVA) suggested that assemblages from the three zones were significantly different from each other over several millennia, with symbiont-bearing (mixotrophic) species dominating the outer reefs. A significant interaction term indicated that within-zone patterns varied. Assemblages in outer reefs unaffected from increased land runoff were persistent until present times. In both other zones, assemblages were also persistent until 150 yr ago, suggesting that benthic foraminiferal assemblages are naturally highly persistent over long (> 2000 yr) timescales. Assemblages in core sections < 55 yr old from inner reefs were significantly (post hoc t test) different from those older than 150 yr. Similarly, assemblages < 55 yr old from intermediate reefs were significantly different compared to older assemblages. A multivariate regression tree (environmental variables: Zone and Age) explained 56.8% of the variance in foraminiferal assemblages and confirmed patterns identified by PERMANOVA. With some exceptions, changes on the inner and intermediate reefs were consistent with a model predicting that increased nutrients and higher turbidity enhance relative abundance of heterotrophic species. Given that assemblages did not change in outer-island reefs (not impacted by runoff) we argue that changes in assemblages due to global change can be rejected as an explanation. Thus, the findings are more consistent with the hypothesis that agricultural runoff since European settlement altered foraminiferal assemblages than with the hypothesis that global forcing caused changes.     

Community assembly in the presence of disturbance: a microcosm experiment

Ecologists know relatively little about the manner in which disturbance affects the likelihood of alternative community stable states and how the history of community assembly affects the relationship between disturbance and species diversity. Using microbial communities comprising bacterivorous ciliated protists assembled in laboratory microcosms, we experimentally investigated these questions by independently manipulating the intensity of disturbance (in the form of density-independent mortality) and community assembly history (including a control treatment with simultaneous species introduction and five sequential assembly treatments). Species diversity patterns consistent with the intermediate disturbance hypothesis emerged in the controls, as several species showed responses indicative of a tradeoff between competitive ability and ability to recover from disturbance. Species diversity in communities with sequential assembly, however, generally declined with disturbance, owing to the increased extinction risk of later colonizers at the intermediate level of disturbance. Similarities among communities subjected to different assembly histories increased with disturbance, a result due possibly to increasing disturbance reducing the importance of competition and hence priority effects. This finding is most consistent with the idea that increasing disturbance tends to reduce the likelihood of alternative stable states. Collectively, these results indicate the strong interactive effects of disturbance and assembly history on the structure of ecological communities.     

Inherently safer design of solvent processes at the conceptual stage: Practical application for substitution

The implementation of inherently safer design concepts is considered beneficial to avoid hazards during early stages of design. The application of existing process design and modeling techniques that aid ‘substitution’, ‘intensification’ and ‘attenuation’ has been shown in this work. The techniques have been applied to solvent processes because of the inherent hazards associated with them, such as large inventories, and presence of highly toxic and flammable materials. For ‘substitution’, computer aided molecular design technique has been applied to select inherently safer solvents for a solvent operation. For ‘intensification’ and ‘attenuation’, consequence models and regulatory guidance from EPA RMP have been integrated into process simulation. Combining existing techniques provides a design team with a higher level of information to make decisions based on process safety. A case study has been shown for liquid extraction of acetic acid–water mixture. Suitable solvents were identified using ICAS 11.0-ProCAMD, and consequence models were integrated into Aspen plus simulator using a calculator sheet. Solvents such as 5-nonanone, 2-nonanone and 5-methyl-2-hexanone provide inherently safer options, but conventionally-used solvent, ethyl acetate, provides higher degree of separation capability. A conclusive decision regarding feasible solvents and operating conditions would depend on design requirements, regulatory guidance, and safety criteria specified for the process. Inherent safety has always been an important consideration to be implemented during early design steps, and this paper presents a methodology to incorporate the principles and to obtain inherently safer alternatives.     

A quantitative investigation of methane gas and solid waste management in mountainous Srinagar city-A case study

Journal of Material Cycles and Waste Management - Methane has tremendous potential for energy production, and enormous amounts of energy can be produced using suitable technology. To address this...     

Spatial and temporal variations in traffic-related particulate matter at New York City high schools

Relatively little is known about exposures to traffic-related particulate matter at schools located in dense urban areas. The purpose of this study was to examine the influences of diesel traffic proximity and intensity on ambient concentrations of fine particulate matter (PM_2.5) and black carbon (BC), an indicator of diesel exhaust particles, at New York City (NYC) high schools. Outdoor PM_2.5 and BC were monitored continuously for 4–6 weeks at each of 3 NYC schools and 1 suburban school located 40 km upwind of the city. Traffic count data were obtained using an automated traffic counter or video camera. BC concentrations were 2–3 fold higher at urban schools compared with the suburban school, and among the 3 urban schools, BC concentrations were higher at schools located adjacent to highways. PM_2.5 concentrations were significantly higher at urban schools than at the suburban school, but concentrations did not vary significantly among urban schools. Both hourly average counts of trucks and buses and meteorological factors such as wind direction, wind speed, and humidity were significantly associated with hourly average ambient BC and PM_2.5 concentrations in multivariate regression models. An increase of 443 trucks/buses per hour was associated with a 0.62 μg/m³ increase in hourly average BC at an NYC school located adjacent to a major interstate highway. Car traffic counts were not associated with BC. The results suggest that local diesel vehicle traffic may be important sources of airborne fine particles in dense urban areas and consequently may contribute to local variations in PM_2.5 concentrations. In urban areas with higher levels of diesel traffic, local, neighborhood-scale monitoring of pollutants such as BC, which compared to PM_2.5, is a more specific indicator of diesel exhaust particles, may more accurately represent population exposures.     

Forests and societal values: comparing scientific and public perception of forest health

This study examines the common ground between lay people and scientists regarding forest values and definitions of forest health. With the forest at Pinery Provincial Park, Ontario, as a case study, the authors compared six ecological indicators to determine which were sensitive to the multiple impacts of visitor use, deer browsing and fire suppression. Plant cover and proportion native species were sensitive to these impacts. Sapling height was greater in low deer density areas. The authors also conducted focused discussions with local interest groups, followed by qualitative data analysis. Overall, there was good convergence between scientific and public views of forests and forest health, although this may partly be due to the groups' interest in nature and the Pinery. Subjects saw a connection between their health and the state of the global and local environment, including forests. There is a need for increased awareness in the public to the necessity of managing high deer populations in parks to protect other forest components such as biodiversity. Forest managers must consider that people greatly value forests near them for mental well being. Group responses suggested that messages explicitly linking forest benefits to human health and well being may motivate people to protect forests.     

Selection and development of efficient consortia for decolorization of metal complex dyes

Decolorization of 18 different metal complex acid dyes was studied with 11 bacterial consortia. Five consortia and five dyes were selected on the basis of maximum decolorization. Among the parameters for optimization, nutrient broth was preferred by all bacterial consortia but one of them showed significant decolorization with Bushnell and Haas medium with or without glucose and yeast extract; hence, this consortium was selected for further studies. Decolorization efficiency was adversely affected beyond 200 mg/L dye and 2% NaCl concentration. Treatment efficiency was increased 2-fold using a developed consortium as compared to original consortium. Changes in the UV-Vis spectra and considerable reduction in chemical oxygen demand of selected metal complex dyes after decolorization prove the efficiency of the consortium for its use. Decolorization of a broad range of metal complex dyes at pH 7.5 ± 0.5, 35 ± 2 °C, and static conditions promises the use of the developed consortium for industrial wastewater treatment.     

Hg Vapor Emission from Broken Compact Fluorescent Lamps (CFLs) in an Acrylic Chamber

The United States Environmental Protection Agency/Environmental Response Team (US EPA/ERT), in collaboration with St. John's College, Dr. B. R. Ambedkar University, Agra, India, is conducting a study to determine Hg vapor emission rates resulting from broken compact fluorescent lamps (CFLs) in a residential setting. The overall objectives of the study are to determine Hg vapor emission data and provide homeowners with cleanup procedures and disposal options for broken CFLs. Most of the currently available CFLs in the US market are manufactured in China for US companies. Several different types of CFLs were purchased from local stores and their Hg content was determined. Based on previous studies, such as the 2011 study by Singhvi and colleagues, five popular spiral CFLs were selected for emission studies in an acrylic chamber. This study found that Hg vapor emissions from CFLs may be significantly greater than those from beads of liquid Hg with weights comparable to the Hg content of the CFLs. The average 24-hour Hg loss into the atmosphere from CFLs broken on a plastic surface ranged from 0.6% to 22% of the bulb content, while that for CFLs broken on carpet ranged from 2.6% to 28%. Projections for a 12 foot × 9.33 foot × 8 foot (25.4 m³) room based on the chamber measurements in this study indicate that CFL breakage in some household settings may produce 24-hour Hg concentrations above the 2000 Agency for Toxic Substances and Disease Registry (ATSDR) minimum risk level (MRL) of 0.2 μg/m³, for typical air exchange rates. This study also indicates that Hg emission may not be proportional to exposed surface area based on experiments using liquid Hg with different surface areas.