Partitioning of perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) between water and sediment

Laboratory partitioning experiments were conducted to elucidate the sorption behaviour and partitioning of perfluoroalkyl compounds (PFCs). Three different sediment types were used and separately spiked with perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) at low environmentally realistic concentrations. PFOA, PFOS and PFOSA were mainly distributed in the dissolved phase at low suspended solid concentrations, indicating their long-range transport potential in the marine environment. In all cases, the equilibrium isotherms were linear and the organic carbon normalised partition coefficients (K_OC) decreased in the following order: PFOSA (log K_OC = 4.1 ± 0.35 cm³ g⁻¹) > PFOS (3.7 ± 0.56 cm³ g⁻¹) > PFOA (2.4 ± 0.12 cm³ g⁻¹). The level of organic content had a significant influence on the partitioning. For the sediment with negligible organic content the density of the sediment became the most important factor influencing the partitioning. Ultimately, data on the partitioning of PFCs between aqueous media and suspended solids are essential for modelling their transport and environmental fate.     

低剂量臭氧的直接通加对活性污泥的活性、微生物种群及污泥减量化的影响

研究构建了2个容积为1.1 L的好氧活性污泥反应器（即1号和2号反应器）1,号反应器每天直接通加低剂量臭氧（投加量为0.01 g O3/g TSS）,不加臭氧的2号反应器作为对照平行运行,均采用每天换一次人工污水的充/排式操作。运行71 d的结果表明2,个反应器对人工污水COD的处理效果基本相同。反应器运行40 d后1,号反应器的污泥浓度比2号反应器的污泥浓度低1 400～1 700 mg/L并可稳定在8 200 mg/L,污泥减量化效果明显。低剂量臭氧的直接通加明显降低了胞内ATP浓度,并影响了微生物的抗氧化活性,2号反应器的平均超氧化物歧化酶和过氧化氢酶酶活比1号反应器分别高了24.3%和9.5%。PCR-DGGE对两反应器微生物种群的分析结果表明：Uncultured gammaproteobacteria bacteri-um、Nannocystis exedens和Uncultured actinobacterium为1号反应器的主要种群;而2号反应器的主要种群为Uncultured bacte-rium和Uncultured gammaproteobacteria bacterium。     

Correction methods for organic carbon artifacts when using quartz-fiber filters in large particulate matter monitoring networks: the regression method and other options

Sampling and handling artifacts can bias filter-based measurements of particulate organic carbon (OC). Several measurement-based methods for OC artifact reduction and/or estimation are currently used in research-grade field studies. OC frequently is not artifact-corrected in large routine sampling networks (e.g., U.S. Environmental Protection Agency (EPA)'s Chemical Speciation Network). In some cases, the OC artifact has been corrected using a regression method (RM) for artifact estimation. In this method, the gamma-intercept of the regression of the OC concentration on the fine particle (PM2.5) mass concentration is taken to be an estimate of the average OC sampling artifact (net of positive and negative artifacts). This paper discusses options for artifact correction in large routine sampling networks. Specifically, the goals are to (1) articulate the assumptions and limitations inherent to the RM, (2) describe other artifact correction approaches, and (3) suggest a cost-effective method for artifact correction in large monitoring networks. The RM assumes a linear relationship between measured OC and PM mass: a constant slope (OC mass fraction) and a constant intercept (RM artifact estimate). These assumptions are not always valid. Additionally, outliers and other individual data points can have a large influence on the RM artifact estimates. The RM yields results within the range of measurement-based methods for some datasets and not for others. Given that the adsorption of organic gases increases with atmospheric concentrations of organics, subtraction of an average artifact from all samples (e.g., across multiple sites) will underestimate OC for lower-concentration samples (e.g., clean sites) and overestimate OC for higher-concentration samples (e.g., polluted sites). For relatively accurate, simple, and cost-effective artifact OC estimation in large networks, the authors suggest backup filter sampling on at least 10% of sampling days at all sites with artifact correction on a sample-by-sample basis as described herein.     

复合型CoO/TiO2光催化剂降解亚甲基蓝动力学研究

以钛酸四丁酯为前驱体,采用溶胶凝胶法,制备了CoO掺杂的TiO2光催化剂。利用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）、紫外可见漫反射（UV-vis DRS）对催化剂进行了分析、表征。以中压汞灯为光源,研究了亚甲基蓝（MB）在CoO/TiO₂微粒水悬浮液中的降解动力学。结果表明：所制备的催化剂活性组分主要是锐钛矿型的二氧化钛和CoO固溶体,粒径为25～30 nm,分布均匀。亚甲基蓝的光催化降解动力学满足一级动力学,在一定的浓度范围内,反应速率常数随初始浓度增大而减少,适当的掺钴量可以有效地提高TiO₂光催化活性,其最佳掺杂量重量百分比为0.25%。     

Future landfill emissions and the effect of final cover installation--a case study

Municipal solid waste (MSW) landfills are potential long-term sources of emissions. Hence, they need to be managed after closure until they do not pose a threat to humans or the environment. The case study on the Breitenau MSW landfill was performed to evaluate future emission levels for this site and to illustrate the effect of final cover installation with respect to long-term environmental risks. The methodology was based on a comprehensive assessment of the state of the landfill and included analysis of monitoring data, investigations of landfilled waste, and an evaluation of containment systems. A model to estimate future emission levels was established and site-specific predictions of leachate emissions were presented based on scenario analysis. The results are used to evaluate the future pollution potential of the landfill and to compare different aftercare concepts in view of long-term emissions. As some leachable substances became available for water flow during cover construction due to a change in the water flow pattern of the waste, a substantial increase in leachate concentrations could be observed at the site (e.g. concentrations of chloride increased from 200 to 800 mg/l and of ammonia-nitrogen from 140 to about 500 mg/l). A period of intensive flushing before the final cover installation could have reduced the amount of leachable substances within the landfill body and rapidly decreased the leachate concentrations to 11 mg Cl/l and 79 mg NH₄-N/l within 50 years. Contrarily, the minimization of water infiltration is associated with leachate concentrations in a high range for centuries (above 400 mg Cl/l and 200 mg NH₄-N/l) with low concomitant annual emission loads (below 12 kg/year of Cl or 9 kg/year of NH₄-N, respectively). However, an expected gradual decrease of barrier efficiency over time would be associated with higher emission loads of 50 kg of chloride and 30 kg of ammonia-nitrogen at the maximum, but a faster decrease of leachate concentration levels.     

Guidance for performing footprint analyses and life‐cycle assessments for the remediation industry

The US Sustainable Remediation Forum (SURF) proposes a nine‐step process for conducting and documenting a footprint analysis and life‐cycle assessment (LCA) for remediation projects. This guidance is designed to assist remediation practitioners in evaluating the impacts resulting from potential remediation activities so that preventable impacts can be mitigated. Each of the nine steps is flexible and scalable to a full range of remediation projects and to the tools used by remediation practitioners for quantifying environmental metrics. Two fictional case studies are presented to demonstrate how the guidance can be implemented for a range of evaluations and tools. Case‐study findings show that greater insight into a study is achieved when the nine steps are followed and additional opportunities are provided to minimize remediation project footprints and create improved sustainable remediation solutions. This guidance promotes a consistent and repeatable process in which all pertinent information is provided in a transparent manner to allow stakeholders to comprehend the intricacies and tradeoffs inherent in a footprint analysis or LCA. For these reasons, SURF recommends that this guidance be used when a footprint analysis or LCA is completed for a remediation project. © 2011 Wiley Periodicals, Inc.     

Changes in Streambed Composition in Salmonid Spawning Habitat of the Elwha River during Dam Removal

One uncertainty associated with large dam removal is the level of downstream sediment deposition and associated short‐term biological effects, particularly on salmonid spawning habitat. Recent studies report downstream sediment deposition following dam removal is influenced by proximity to the source and river transport capacity. The impacts of dam removal sediment releases are difficult to generalize due to the relatively small number of dam removals completed, the variation in release strategies, and the physical nature of systems. Changes to sediment deposition and associated streambed composition in the Elwha River, Washington State, were monitored prior to (2010‐2011) and during (2012‐2014) the simultaneous removal of two large dams (32 and 64 m). Changes in the surface layer substrate composition during dam removal varied by year and channel type. Riffles in floodplain channels downstream of the dams fined and remained sand dominated throughout the study period, and exceeded levels known to be detrimental to incubating salmonids. Mainstem riffles tended to fine to gravel, but appear to be trending toward cobble after the majority of the sediment was released and transported through system. Thus, salmonid spawning habitats in the mainstem appear to have been minimally impacted while those in floodplain channels appear to have been severely impacted during dam removal.     

Towards a Community Based Ethic: A Phenomenological Account of Environmental Change From the Sundarbans’s Islanders

Rapid changes in the environment are far from being a new phenomenon, especially for vulnerable zones like the Sundarbans, India. In the era of climate change, when these islands are witnessing a lot of initiatives to combat the increasing negative impacts of various environmental changes, this article showcases why it is imperative to study the everyday phenomenological experiences of the islanders to be able to go beyond the climate-affected narratives and generate a deeper understanding of the phenomenon itself—‘environmental change’. This article provides the islanders’ phenomenological accounts of environmental change and borrowing from Heidegger’s concept of ‘Being-in-the-world’ explicates the reason behind the disparity in acknowledging environmental change across individuals. Making this interpretive phenomenological account of environmental change as the ground, this article offers a rubric of community-based ethic which perhaps can prove to be effective in addressing any place-specific environmental change, over and above the prevalent approach of place-based ethic.     

Towards an international standard: The ISO/DIS 18504 standard on sustainable remediation

Sustainable remediation is the elimination and/or control of unacceptable risks in a safe and timely manner while optimizing the environmental, social, and economic value of the work. Forthcoming International Organization for Standardization (ISO) Standard on Sustainable Remediation will allow countries without the capacity to develop their own guidance to benefit from work done over the past decade by various groups around the world. The ISO standard has progressed through the committee draft (ISO/CD 18504) and draft international standard (ISO/DIS 18504) stages. The risk‐based approach to managing the legacy of historically contaminated soil and groundwater has been incorporated into policy, legislation, and practice around the world. It helps determine the need for remediation and the end point of such remediation. Remediation begins with an options appraisal that short lists strategies that could deliver the required reduction in risk. A remediation strategy comprises one or more remediation technologies that will deliver the safe and timely elimination and/or control of unacceptable risks. The ISO standard will help assessors identify the most sustainable among the shortlisted, valid alternative remediation strategies. Practitioners presenting case studies claiming to constitute sustainable remediation should now report how they have aligned their work with the new standard. Indicators are used to compare alternative remediation strategies. The simplest metric that allows a characteristic to act as an indicator should be chosen. Weightings indicators can become a contested exercise and should only be undertaken where there is a clear desire for it by stakeholders and a clear need for it in identifying a preferred strategy. The simplest means of ranking alternative remediation strategies should be adopted.