Hospital waste management and toxicity evaluation: a case study

Hospital waste management is an imperative environmental and public safety issue, due to the waste's infectious and hazardous character. This paper examines the existing waste strategy of a typical hospital in Greece with a bed capacity of 400-600. The segregation, collection, packaging, storage, transportation and disposal of waste were monitored and the observed problematic areas documented. The concentrations of BOD, COD and heavy metals were measured in the wastewater the hospital generated. The wastewater's toxicity was also investigated. During the study, omissions and negligence were observed at every stage of the waste management system, particularly with regard to the treatment of infectious waste. Inappropriate collection and transportation procedures for infectious waste, which jeopardized the safety of staff and patients, were recorded. However, inappropriate segregation practices were the dominant problem, which led to increased quantities of generated infectious waste and hence higher costs for their disposal. Infectious waste production was estimated using two different methods: one by weighing the incinerated waste (880 kg day(-1)) and the other by estimating the number of waste bags produced each day (650 kg day(-1)). Furthermore, measurements of the EC(50) parameter in wastewater samples revealed an increased toxicity in all samples. In addition, hazardous organic compounds were detected in wastewater samples using a gas chromatograph/mass spectrograph. Proposals recommending the application of a comprehensive hospital waste management system are presented that will ensure that any potential risks hospital wastes pose to public health and to the environment are minimized.     

Landfill leachate treatment using a rotating biological contactor and an upward-flow anaerobic sludge bed reactor

This paper describes the feasibility of an aerobic system (rotating biological contactor, RBC) and a biological anaerobic system (upward-flow anaerobic sludge bed reactor) at small scale for the treatment of a landfill leachate. In the first phase of the aerobic system study, a cyclic-batch RBC system was used to select perforated acetate discs among three different acetate disc configurations. These discs were chosen on the basis of high COD removal (65%) and biological stability. In the second phase, the RBC system (using four stages) was operated continuously at different hydraulic retention times (HRT), at different rotational speeds, and with varying organic concentrations of the influent leachate (2500-9000mgL(-1)). Forty percent of the total surface area of each perforated disc was submerged in the leachate. A COD removal of about 52% was obtained at an HRT of 24h and a rotational speed of 6rpm. For the anaerobic system, the reactor was evaluated with a volumetric organic load of 3273g-COD m(-3) day(-1) at an HRT of 54, 44, 39, 24 and 17h. At these conditions, the system reached COD removal efficiencies of 62%, 61%, 59%, 44% and 24%, respectively.     

Reusing fly ash in glass fibre reinforced cement: a new generation of high-quality GRC composites

New composite materials based on an alkali-resistant glass-fibre reinforced cement (AR-GRC) system are being developed by using fly ash (FA) produced at coal thermoelectric power plants, and fluid catalytic cracking catalyst residue (FC3R) from the petrol industry as cement replacement materials. These wastes are reactive from the pozzolanic viewpoint, and modify the nature and the microstructure of the cement matrix when a part of the Portland cement is replaced in the formulation of GRC. Several microstructural and mechanical aspects are being studied for AR-GRC systems. The behaviour of composites exposed to ageing shows that the pozzolanic activity of the ground FA added in high amounts and its mixture with the FC3R increase the flexural strength and no evidences of strength decay are observed. Additionally, the fibres due to the high alkalinity of the cementing matrix can be deteriorated. Fibres in the control (only Portland cement) and FC3R containing composites were attacked, whereas composites with FA and their mixture with FC3R show that the fibres have not been attacked, due to the pozzolanic activity of replacing materials that reduce the calcium hydroxide content in the cementing matrix.     

Biodegradability of Poly (lactic acid), Preparation and Characterization of PLA/Gum Arabic Blends

In this study, the biodegradation of PLA films using microorganisms from Lake Bogoria (Kenya) were investigated. The biodegradation tests done using certain strains of thermophilic bacteria showed faster biodegradation rates and demonstrated temperature dependency. The biodegradation of the PLA films was studied using Gel Permeation Chromatography (GPC) and light microscopy. The biodegradation of PLA was demonstrated by decrease in molecular weight. The preparation and characterization of PLA/Gum Arabic blends were also investigated using DSC, TGA, TMA and NMR. In summary, the results obtained in this research show that PLA films undergo fast biodegradation using thermophiles isolated from Lake Bogoria. The PLA/GA blends studies show it is possible to prepare films of varying hydrophobic–hydrophilic properties for various applications.     

The impact of the 2004 tsunami on coastal Thai communities: assessing adaptive capacity

The suddenness and scale of the 26 December 2004 tsunami and the challenges posed to affected communities highlighted the benefits of their members having a capacity to confront and adapt to the consequences of such a disaster. Research into adaptive capacity or resilience has been conducted almost exclusively with Western populations. This paper describes an exploratory study of the potential of a measure of collective efficacy developed for Western populations to predict the capacity of members of a collective society, Thai citizens affected by the 2004 tsunami, to confront effectively the recovery demands associated with this disaster. Following a demonstration that this measure could predict adaptive capacity, the role of religious affiliation, ethnicity and place of residence in sustaining collective efficacy is discussed. The implications of the findings for future research on, and intervention to develop, adaptive capacity among Thai citizens in particular and collectivist societies in general are discussed.     

LEAP2000:可持续能源分析的工具

LEAP是由斯德哥尔摩环境研究所(SEI)波士顿中心领导的一项合作项目,旨在为一体化的能源环境分析建立一套新的分析软件和数据库.LEAP2000项目的产品应尽早获得以广为传播.     

Unprecedented bleaching-induced mortality in Porites spp. at Rangiroa Atoll, French Polynesia

In April-May 1998, mass coral bleaching was observed in the lagoon of Rangiroa Atoll, Tuamotu Archipelago, French Polynesia. Six months later, the extent of bleaching-induced coral mortality was assessed at three sites. Corals in the fast-growing genus Pocillopora had experienced >99% mortality. Many large colonies of the slow-growing genus Porites (mean horizontal cross-sectional area 5.8 m²) had also died - a phenomenon not previously observed in French Polynesia and virtually unprecedented world-wide. At one site, 25% of colonies, or 44% of the pre-bleaching cover of living Porites, experienced whole-colony mortality. At the two other sites, recently dead Porites accounted for 41% and 82% of the pre-bleaching live cover. Mortality in Porites was negatively correlated with depth between 1.5 and 5 m. Using a 50-year dataset of mean monthly sea surface temperature (SST), derived from ship- and satellite-borne instruments, we show that bleaching occurred during a period of exceptionally high summer SST. 1998 was the first year in which mean monthly SSTs exceeded the 1961-1990 upper 95% confidence limit (29.4°C) for a period of three consecutive months. We suggest that the sustained 3-month anomaly in local summer SST was a major cause of coral mortality, but do not discount the synergistic effect of solar radiation. Recovery of the size-frequency distribution of Porites colonies to pre-bleaching levels may take at least 100 years.     

Life on glass houses: sponge stalk communities in the deep sea

Photographs of the deep-sea floor often show organisms attached to biogenic structures that protrude from the soft bottom. In particular, the stalks of glass sponges (hexactinellids) provide hard substrata and act as habitat islands for deep-sea fauna. The primary objectives of this study were to determine the abundance of glass sponge “stalks” at an abyssal station in the NE Pacific, to identify the fauna associated with stalks, and to compare the distribution patterns of epifaunal taxa both horizontally and vertically. Densities of stalks and large epifauna were estimated from analysis of ∼9 km of photographic transects taken in 1994–1995 at station M (34°45′N; 123°00′W; 4,100 m depth) off California, USA. At least 87% of the stalks were the spicule columns of live or dead hexactinellids in the genus Hyalonema (Gray, 1832). Stalks appeared to be distributed randomly across the sea floor (density: 0.13 stalks m⁻²). A colonial zoanthid, Epizoanthus stellaris (Hertwig, 1888), inhabited 20% of the stalks and was the most commonly observed epifaunal organism, followed by other suspension feeders that generally were situated at the top of the structures. Thirty-five stalk communities were collected in tube cores in 1994–1995 using the submersible “Alvin”. A total of 139 taxa was associated with these hard-substratum habitats (another five species were observed only in photographs). Although taxon richness was high, the species diversity of these communities was relatively low due to the dominance in percentage abundance of a foraminiferan, Cibicides lobatulus (Walker and Jakob, 1798), and a serpulid polychaete, Bathyvermilia sp. (Zibrowius, 1973). The relationship between number of taxa and surface area of the stalks yielded a slope (z-value) typical of islands with a low rate of immigration. Three-dimensional complexity created by branching epifauna on the stalks provided more surface area and a variety of cryptic microhabitats. Vertical zonation on the stalks appeared to be controlled by biological interactions among species, with solitary fauna and certain functional groups of colonial organisms restricted by sheet-like colonial organisms that appeared to be dominant space competitors. Received: 13 April 2000 / Accepted: 9 November 2000     

The Bias of Complementarity Hotspots toward Marginal Populations

Abstract: It has been suggested that using complementarity to identify networks of important areas for conserving biodiversity may preferentially select areas within the margins of species ranges. We tested this idea by examining the location of complementarity hotspots in relation to two measures of range core-periphery. The first measures patterns of aggregation among records within each species' range to identify areas within the core (i.e., areas with aggregated distributions) and periphery (i.e., areas with scattered distributions) of the range. The second measures spatial turnover among species to identify areas with a high density of range edges. For three selected groups of terrestrial vertebrates in Europe—mammals, birds, and herptiles—areas chosen based on complementarity were located within the margins of species' ranges more often than expected by chance. This pattern was consistent for the two measures of core-periphery we used. The bias of complementarity hotspots toward marginal populations is especially important for species with restricted range sizes. If extinctions are determined mainly by demographic factors, then selecting areas at the peripheries of species' ranges might be a poor option. But if extinctions are determined mainly by extrinsic factors, then peripheral populations might be important to ensure the long-term persistence of species.