Metallophyte status of violets of the section Melanium

Violets from metal-enriched soils have controversially been described as both heavy-metal accumulators and excluders in the literature. The present study solves the issue for violets of the section Melanium (zinc violets, Viola lutea ssp. calaminaria and V. lutea ssp. westfalica; hartsease or wild pansy, Viola tricolor; and mountain pansy, V. lutea). The aims were to determine the concentrations of heavy metals in the soil and in the roots and shoots of field-collected plants, to evaluate the potential impact of colonisation by arbuscular mycorrhizal fungi on heavy-metal concentrations in the plant tissues, and to quantitatively define the localisation of the elements in root cross-sections. When these violets grow in low-metal soils, higher concentrations of the heavy metals were found in the roots and shoots than in the soil, whereas the opposite was seen in samples from high-metal soils. Under all field conditions examined, the roots of all of these species were colonised by arbuscular mycorrhizal fungi. However, V. tricolor was marginally colonised when the concentrations of Zn and P were higher in the soil. Determination of the spatial distribution of the elements in root cross-sections of these violets indicates tissue-specific deposition of elements within the vascular tissue, the cortex, and the rhizodermis. These data indicate that violets of the section Melanium are heavy-metal excluders.     

Copper toxicity to Lemna minor modelled using humic acid as a surrogate for the plant root

Humic acids are chemically analogous to plant root cell walls in that their surface sites are principally comprised of carboxylic and phenolic acids which bind both metals and protons. Based on this analogy, we developed a biotic-ligand type of model to predict Cu toxicity to Lemna minor, using particulate humic acid (HA(part)) of the Windermere Humic Aqueous Model (WHAM), and 7d static-renewal exposures with five surface waters and one nutrient media which varied in DOC (1-10 mg L(-1)), pH (6.9-8.7), and water hardness (35-236 mg equivalent CaCO(3)L(-1)). Although the range of waters tested resulted in a 36-fold variation in 50% inhibitory concentration (IC50) values, the calculated concentration of Cu bound to HA(part) using this framework was highly correlated with pooled percent net root elongation (%NRE) (R(2)=0.95). Ten and fifty percent IC values based on [Cu-HA(part)] were additionally within a factor of ±1.5 and ±1.4, respectively, inclusive of 95% confidence limits. This model construct, which defines the free metal ion and the first hydrolysis product (but not metal carbonate complexes) as being bioavailable, provides an alternative means of defining the binding surface in bioavailability models, whereby a heterogeneous mixture of ligands collectively influence root-metal sorption and toxicity.     

Management of invasive populations of the freshwater crayfish <Emphasis Type="Italic">Procambarus clarkii</Emphasis> (Decapoda,Cambaridae): test of a population-control method and proposal of a standard monitoring approach

Invasive species are one of the main threats to biodiversity. When an alien species is introduced into a new environment, fast identification and definition of management strategies may avoid or minimize impacts. When an invasive species is already established, the most adopted approaches are population control and monitoring. In order to perform such strategies, assessment of characteristics of the invasive population is imperative. This study tested a new method of population size estimation and monitoring in an invasive population of crayfish Procambarus clarkii in a conservation area in the Atlantic Rain Forest (Southeastern Brazil). The population dynamics was studied for 1 year to examine the efficacy of the selected method and to evaluate if the population is stable. Later, the effect of periodical removal of animals on the population size was tested. The method of population estimation used in this study proved to be very effective. We recommend using it to monitor invasive populations of P. clarkii. The population size varied discretely over the year with variable but low growth rate, indicating that the population is already established which introduce a notable threat to native species. The continuous removal of specimens proved to be inefficient since the growth rate was higher after the removal. One intensive removal event might be more effective than a continuous moderate removal as the one applied in this study.     

The application of Geographical Information Systems to determine environmental impact significance

This paper presents a new methodology for impact assessment—SIAM (Spatial Impact Assessment Methodology)—which is based on the assumption that the importance of environmental impacts is dependent, among other things, on the spatial distribution of the effects and of the affected environment. The information generated by the use of Geographical Information Systems (GIS) in impact identification and prediction stages of Environmental Impact Assessment (EIA) is used in the assessment of impact significance by the computation of a set of impact indices. For each environmental component (e.g., air pollution, water resources, biological resources), impact indices are calculated based on the spatial distribution of impacts. A case study of impact evaluation of a proposed highway in Central Portugal illustrates the application of the methodology and shows its capabilities to be adapted to the particular characteristics of a given EIA problem.     

Environmental protection, the economy, and jobs: national and regional analyses

The relationship between environmental protection (EP), the economy, and jobs has been an issue of harsh contention for decades. Does EP harm the economy and destroy jobs or facilitate economic growth and create jobs? We address this issue by summarizing the results of the Jobs and the Environment Initiative, research funded by nonprofit foundations to quantify the relationship between EP, the economy, and jobs. We estimate the size of the US environmental industry and the numbers of environment-related jobs at the national level and in the states of Florida, Michigan, Minnesota, North Carolina, Ohio, and Wisconsin. This is the first time that such comprehensive, detailed estimates have been developed.     

Rhythmicity of larval release in three species of intertidal brachyuran crabs (Crustacea: Brachyura) from Inhaca Island (Mozambique)

 A study of rhythmicity of larval release in three species of intertidal brachyuran crabs, based on laboratory and field experiments, was undertaken at Inhaca Island, southern Mozambique, using Leptodius exaratus and Macrophthalmus grandidieri from December 1994 to January 1995, and Arcotheres palaensis from April to July 1995. L. exaratus and M. grandidieri showed a semi-lunar cycle in larval release. The release of larvae for L. exaratus, a species having conspicuous larvae, occurred in the first half of the night, after the post-crepuscular high tide, which suggests maximisation of protection of larvae from visual predation. The larval release activity matched the late spring and early neap tides. Results from the field were similar to those from the laboratory. M. grandidieri, having inconspicuous larvae, did not show a pattern related to the light–dark cycle and hatched during spring tides (around full and new moons) to maximise larval dispersion. A. palaensis, living inside the host mussel which inhabits the lowest section of the intertidal zone, did not show a relation with moon phase, tidal or light–dark cycles. Received: 16 February 1999 / Accepted: 8 December 1999     

Modelling a recovery network for WEEE: a case study in Portugal

The European Union directive for electric and electronic waste, published in 2003, enforced all European countries to meet some targets concerning the recycling and recovery of these products. This directive was transposed to the Portuguese legislation in 2004. Following this, a group of EEE producers set up an organization (Amb3e) whose mission was to design and manage a nationwide recovery network for WEEE, which will be the subject matter of this work. A generic MILP model is proposed to represent this network, which is applied to its design and planning, where the best locations for collection and sorting centres are chosen simultaneously with the definition of a tactical network planning. Several analyses are performed to provide further insights regarding the selection of these alternative locations. The results gave support to the company strategic expansion plans for a high number of centres to be opened and to their location near the major WEEE sources.     

Comparison of waste prevention behaviors among three Japanese megacity regions in the context of local measures and socio-demographics

Waste prevention behaviors (WPBs) should be investigated separately from recycling behaviors and analyzed in the context of local policies and measures. Previous studies on WPBs have been mainly conducted in the USA and Europe (mainly in the UK), and studies in Japan have remained very limited to date. Moreover, the effects of socio-demographic factors have been rarely described correctly based on appropriate large sampling. In this study, we conducted an on-line questionnaire survey and obtained 8000 respondents in three megacity regions (Tokyo, Osaka, and Aichi) in Japan. Among these three regions, Osaka respondents showed significantly lower practice rates in nine of 18 WPBs. Particularly in My-bag behavior, the charging of plastic shopping bags strongly affects the practice rate. As shown in the results, local policies and measures affect WPBs. Based on the practice rates, latent four factors were extracted by factor analysis. Multiple regression analysis revealed that gender and age significantly affect WPB factors before local policy effects.     

Effects of Weathering on Mechanical,Antimicrobial Properties and Biodegradation Process of Silver Loaded TPE Compounds

The incorporation of antimicrobial metals such as silver is an alternative to protect the material against microbial attack. However, loaded polymer can lose its antimicrobial properties after some time of use, and the additive may even leak out into the environment becoming harmful to non-target organisms. This study aims to evaluate the mechanical properties and antimicrobial activity of silver containing thermoplastic elastomer (TPE) samples exposed to weathering and the influence of additive incorporation in material biodegradation in the soil. For this purpose, silver ions (Ag⁺_bentonite, Ag⁺_phosphate) and silver nanoparticles (AgNp_silica) based additives were blended in a formulation of SEBS, polypropylene and mineral oil. The test samples were exposed to natural ageing over nine months, and were then evaluated according to their mechanical properties, antimicrobial activity, and degree of crystallinity and surface characteristics. The biodegradation process before and after natural ageing was evaluated through the generation of carbon dioxide. The results show that the action of natural ageing reduced the mechanical properties of loaded and unloaded TPE, and modified the degree of crystallinity and the chemical characteristic of the TPE surface. The presence or type of additive did not influence material resistance after being exposed to weathering. A decrease in antimicrobial activity in samples after natural ageing was observed. At a variable level and according to the chemical content, generation of carbon dioxide from TPE samples was greater in aged samples than in unexposed ones.     

Using Phylogenetic Diversity Measures to Set Priorities in Conservation: an Example from Southern South America

Abstract: Phylogenetic diversity measures rank areas for biodiversity conservation priorities based on information encoded in phylogenies (cladograms). The goal of these ranks for conservation is to consider as many factors as possible that provide additional taxic information, such as taxa richness, taxa distributional patterns, area endemicity, and complementarity between areas. At present there are many measures that consider phylogenetic information, including node-based, genetic-distance, and feature-based measures. We devised a modified phylogenetic node-based index that we call "taxonomic endemicity standardized weight," which considers not only the taxonomic distinctness of the taxa that inhabit a given area but their endemicity as well. Once the standardized weight of the taxonomic endemicity identifies the area of highest priority, complementarity can be used to identify the second area and so on. We used this node-based index to rank priority areas for conservation in southern South America, and we compared the results of our rankings to results based on other node-based indexes. Our index identified Santiago district, in Central Chile province, as the highest priority area for conservation, followed by Maule, Malvinas, and districts of Subantarctic province. Malvinas exhibits greater complementarity relative to Santiago than Maule does, however, so Malvinas is ranked second in priority. Indexes based on phylogenetic information measure the evolutionary component of biodiversity and allow one to identify areas that will ensure the preservation of evolutionary potential and phylogenetically rare taxa. The modified index we propose is sensitive to taxic distinctness and endemicity as well and allows information from diverse taxa to be combined (i.e., different cladograms). The use of complementarity allows for preservation of the maximum quantity of taxa in a minimal number of protected areas.