Accumulation of metals in the soil of an overland flow wastewater treatment system

Accumulation of Co, Cu, Cr, Mo, Ni, Pb and Zn was evaluated in a soil profile of an overland flow system used for the post-treatment of urban wastewater. A pilot version of the overland flow system received urban wastewater from five up-flow anaerobic filters filled with bamboo (Bambusa tuldoides) rings. The anaerobic effluent was applied as feed over 18 months at rates varying from 7 to 28 L min(-1), to a vegetated slope length covered with Tifton 85 (Cynodon) sp. grass. Soil and plant samples were collected in triplicate from the top to the bottom of the slope. In addition, the soils were sampled at the depths 0-20 and 20-40 cm. The metal concentrations found in the overall system were compared to those obtained in a control area located at the beginning of the slope onto which nothing was applied. A month of monitoring the urban wastewater of Limeira City (S?o Paulo State, Brazil) showed a drastic change in metals concentration due to the irregular discharge of industrial waste. This irregular discharge introduces Cr, Cu, Ni, Pb and Zn into the system used to treat domestic wastewater. The mass balance indicates the accumulation of metals in the soil and the translocation to the plants; also that they could be evapotranspirated, percolated and discharged.     

Removal of famoxadone,fluquinconazole and trifloxystrobin residues in red wines: Effects of clarification and filtration processes

The effects of six clarification agents [egg albumin, blood albumin, bentonite + gelatine, charcoal, polyvinylpolypyrrolidine (PVPP) and silica gel] on the removal of residues of three fungicides (famoxadone, fluquinconazole and trifloxystrobin) applied directly to a racked red wine, elaborated from Monastrell variety grapes from the D.O. Region of Jumilla (Murcia, Spain) were studied. The clarified wines were filtered with 0.45 μ m nylon filters to determine the influence of this winemaking process in the disappearance of fungicide residues. Analytical determination of fluquinconazole and trifloxystrobin was performed by gas chromatography with electron captor detector (ECD), while that of famoxadone using an HPLC equipped with a diode array detector (DAD). Generally, trifloxystrobin is the fungicide that is the lowest persistent one in wines, except in the egg albumin study whereas, the most persistent one is fluquinconazole. The elimination depends on the nature of the active ingredient, though the water stability in the presence of light within it has more influence than the solubility and polarity of the product itself. The most effective clarifying agents were the charcoal and PVPP. The silica gel and bentonite plus gelatine were not enough to reduce considerably the residual contents in the wine clarified with them. In general terms, filtration is not an effective step in the elimination of wine residues. The greatest removal after filtration is obtained in wines clarified with egg albumine and bentonite plus gelatine, and the lowest in those clarified with PVPP.     

Chiral pharmaceuticals in the environment

Many pharmaceutical pollutants are chiral, existing in the environment as a single enantiomer or as mixtures of the two enantiomers. In spite of their similar physical and chemical properties, the different spatial configurations lead the enantiomers to have different interactions with enzymes, receptors or other chiral molecules, which can give diverse biological response. Consequently, biodegradation process and ecotoxicity tend to be enantioselective. Despite numerous ongoing research regarding analysis and monitorization of pharmaceutical ingredients in the environment, the fate and effects of single enantiomers of chiral pharmaceuticals (CP) in the environment are still largely unknown. There are only few chiral analytical methods to accurately measure the enantiomeric fraction (EF) in environmental matrices and during biodegradation processes. Furthermore, the ecotoxicity studies usually consider the enantiomeric pair as unique compound. We reviewed the current knowledge about CP in the environment, as well as the chiral analytical methods to determine the EF in environmental matrices. The degradation and removal processes of CP of important therapeutic classes, usually detected in the environment, and their toxicity to aquatic organisms were also reviewed. On the other hand, this review demonstrate that despite the great importance of the stereochemistry in pharmaceutical science, pharmacology and organic chemistry, this is normally neglected in environmental studies. Therefore, CP in the environment need much more attention from the scientific community, and more research within this subject is required.     

The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

The potential use of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/graphite nanosheets (GNS) as a biodegradable nanocomposite has been explored. PHBV/GNS nanocomposites films were prepared by solution casting at various concentrations of GNS—0.25, 0.50 and 1.00 wt% GNS. The films were exposed to artificial ultraviolet radiation (UV) during 52 h. The effect of GNS on PHBV photodegradation was investigated and compared to neat PHBV film. The artificial photodegradation induced changes in physical (weight loss), chemical carbonyl index by Fourier transform infrared spectroscopy, thermal degree of crystallinity and melting temperature by differential scanning calorimetry and morphological scanning electron microscopy characteristics. Based on the results obtained from aforementioned analyzes it was verified that GNS inhibits the oxidative degradation of PHBV matrix.     

Interactions between wave action and grazing control the distribution of intertidal macroalgae

Canopy-forming macroalgae are key species on temperate rocky shores. However, there is a lack of understanding of how the relative balance of physical and biological factors controls the establishment and persistence of intertidal macroalgae. Here we present an integrated study of the relative importance of wave-induced forces and grazing for the recruitment and survival of the canopy-forming intertidal macroalgae Fucus vesiculosus and F. spiralis. A set of overtopped breakwaters provided a nearly unconfounded gradient in wave exposure between seaward and landward sides. A biomechanical analysis was performed based on empirical measurements of maximum drag forces in breaking waves, a model of long-term maximum wave height, and the breaking stress of Fucus spp. The estimated maximum flow speed (7-8 m/s) on the seaward side of the breakwaters was predicted to completely dislodge or prune Fucus spp. larger than approximately 10 cm, while dislodgment was highly unlikely on the landward side for all sizes. Experimental transplantation of Fucus spp. supported the biomechanical analysis but also suggested that mechanical abrasion may further limit survival in wave-exposed locations. Experimental removal of the limpet Patella vulgata, which was the principal grazer at this site, resulted in recruitment of Fucus spp. on the seaward side. We present a model of limpet grazing that indicates that limpet densities >5-20 individuals/m2 provide a proximate mechanism preventing establishment of Fucus spp., whereas wave action >2 m/s reduces persistence through dislodgment and battering. In a conceptual model we further propose that recruitment and survival of juvenile Fucus spp. are controlled indirectly by wave exposure through higher limpet densities at exposed locations. This model predicts that climate change, and in particular an increased frequency of storm events in the northeast Atlantic, will restrict fucoids to more sheltered locations.     

Enhanced photocatalytic activity using GO/TiO<Subscript>2</Subscript> catalyst for the removal of DCA solutions

This work aimed to optimize high-performance photocatalysts based on graphene oxide/titanium dioxide (GO/TiO₂) nanocomposites for the effective degradation of aqueous pollutants. The catalytic activity was tested against the degradation of dichloroacetic acid (DCA), a by-product of disinfection processes that is present in many industrial wastewaters and effluents. GO/TiO₂ photocatalysts were prepared using three different methods, hydrothermal, solvothermal, and mechanical, and varying the GO/TiO₂ ratio in the range of 1 to 10%. Several techniques were applied to characterize the catalysts, and better coupling of GO and TiO₂ was observed in the thermally synthesized composites. Although the results obtained for DCA degradation showed a coupled influence of the composite preparation method and its composition, promising results were obtained with the photocatalysts compared to the limited activity of conventional TiO₂. In the best case, corresponding to the composite synthesized via hydrothermal method with 5% of GO/TiO₂ weight ratio, an enhancement of 2.5 times of the photocatalytic degradation yield of DCA was obtained compared to bare TiO₂, thus opening more efficient ways to promote the application of photocatalytic remediation technologies.     

Temporal and spatial assessment of groundwater contamination with nitrate using nitrate pollution index (NPI), groundwater pollution index (GPI), and GIS (case study: Essaouira basin,Morocco)

Environmental Science and Pollution Research - Groundwater aquifers in Morocco’s coastal regions are under serious threat as a result of climate change. This study was conducted to evaluate...