Monitoring of firefighters exposure to smoke during fire experiments in Portugal

Forest fires represent a serious threat to public security in Europe due to the large burned area. Moreover, smoke pollution due to forest fire events is an important public health issue for the communities directly affected, and particularly for the personnel involved in firefighting operations. Aiming to contribute to the scientific knowledge concerning firefighters exposure to forest fires smoke, data of individual exposure to carbon monoxide, nitrogen dioxide, volatile organic compounds, and particulate matter were obtained during experimental field fires for a group of 10 firefighters equipped with portable “in continuum” measuring devices. Measured values are very high exceeding the Occupational Exposure Standard limits, in particular for peak limit thresholds. These are the first measurements and analysis of firefighter's individual exposure to toxic gases and particles in fire smoke experiments in Europe. However, they already indicate that urgent measures to avoid these levels of exposure are needed.     

Factors Influencing Allelopathy and Toxicity in Prymnesium parvum1

Granéli, Edna and Paulo S. Salomon, 2010. Factors Influencing Allelopathy and Toxicity in Prymnesium parvum. Journal of the American Water Resources Association (JAWRA) 46(1):108-120. Abstract: Some microalgae are able to kill or inhibit nutrient-competing microalgae, a process called allelopathy. Inhibiting or killing competitors enable these species to monopolize limiting resources, such as nitrogen and phosphorus. Prymnesium parvum is known to produce such allelopathic compounds, substances that seem identical to the ichthyotoxins identified from this species. Biotic and abiotic environmental factors influence not only growth rates but also toxin/allelopathic compounds production by P. parvum cells. Toxin production, as well as allelopathy, including grazer deterrence, increases dramatically in light, temperature, or nutrient stressed P. parvum cells. Correspondingly, toxicity and allelopathy may decrease, or cease completely, if cells are grown with high amounts of N and P in balanced proportions. However, even under nutrient (N and P) sufficient conditions, P. parvum is able to produce toxins/allelopathic compounds, with negative effects on other phytoplankton species or grazers, if cells densities of P. parvum are high relative to other species. This negative effect might shift the plankton community to more toxin resistant species. Filtrates from nutrient-deficient P. parvum cultures have almost the same strong negative effect on grazers and other phytoplankton species as when Prymnesium cells are grown together with the target organisms. Eutrophication, the increased input of N and P to aquatic ecosystems, besides increasing nutrient concentrations, is usually provoking unbalanced N:P condition for the optimal growth of phytoplankton, deviating from the Redfield ratio, i.e., the phytoplankton cellular nitrogen to phosphorus ratio, N:P = 16:1 (by atoms) or 7.2:1 (by weight). Eutrophication thus both enhances P. parvum growth and increases production of toxins and allelopathic compounds. Supplying N-deficient or P-deficient P. parvum cells with the deficient nutrient reduces toxicity to less than half within 24 h after additions. As P. parvum is mixotrophic, uptake of dissolved or particulate organic N (DON or PON) can also reduce toxicity and allelopathy in the same manner as addition of inorganic N to N-starved cells. In conclusion, P. parvum, by increasing its toxicity and allelopathic ability under poor environmental conditions, outcompetes the co-occurring phytoplankton species.     

Design,Engineering, and Construction of Photosynthetic Microbial Cell Factories for Renewable Solar Fuel Production

There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H₂ production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.     

Ecosystem Impacts of Geoengineering: A Review for Developing a Science Plan

Geoengineering methods are intended to reduce climate change, which is already having demonstrable effects on ecosystem structure and functioning in some regions. Two types of geoengineering activities that have been proposed are: carbon dioxide (CO(2)) removal (CDR), which removes CO(2) from the atmosphere, and solar radiation management (SRM, or sunlight reflection methods), which reflects a small percentage of sunlight back into space to offset warming from greenhouse gases (GHGs). Current research suggests that SRM or CDR might diminish the impacts of climate change on ecosystems by reducing changes in temperature and precipitation. However, sudden cessation of SRM would exacerbate the climate effects on ecosystems, and some CDR might interfere with oceanic and terrestrial ecosystem processes. The many risks and uncertainties associated with these new kinds of purposeful perturbations to the Earth system are not well understood and require cautious and comprehensive research.     

Host-guest complexes of phenoxy alkyl acid herbicides and cyclodextrins. MCPA and β-cyclodextrin

The chlorophenoxy herbicide MCPA (4-chloro-2-methylphenoxyacetic acid), widely used for the control of broad-leaf weeds primarily in cereal and grass seed crops, still remains one of the most often used herbicides in Portugal. As the formation of inclusion complexes with cyclodextrins can improve its solubility properties, the interaction between the herbicide MCPA and β-cyclodextrin was investigated. The stability constants describing the extent of formation of the complexes have been determined by phase-solubility studies. Different analytical techniques [ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR)] were employed for a thorough investigation of the structural characteristics of the obtained complexes, which exhibited distinct features and properties from both “guest” and “host” molecules. FTIR and ¹H NMR data obtained for the MCPA/β-CD complexes gave information about the interaction between MCPA and the nonpolar cyclodextrin cavity. The dramatic change observed in band frequency and proton displacements of OCH₂ group and H6 aromatic proton confirmed the inclusion of MCPA in β-CD.

The formation of an inclusion complex between MCPA and β-CD increased the aqueous solubility of this herbicide which could be a particularly advantageous property for some specific applications, namely to improve commercial formulation and for environmental protection.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Advancing climate compatible development: lessons from southern Africa

Climate compatible development (CCD) has emerged as a new concept that bridges climate change adaptation, mitigation and community-based development. Progress towards CCD requires multi-stakeholder, multi-sector working and the development of partnerships between actors who may not otherwise have worked together. This creates challenges and opportunities that require careful examination at project and institutional levels and necessitates the sharing of experiences between different settings. In this paper, we draw on the outcomes from a multi-stakeholder workshop held in Mozambique in 2012, the final in a series of activities in a regional project assessing emerging CCD partnerships across southern Africa. The workshop involved policymakers, researchers and representatives from NGOs and the private sector. We employ a content analysis of workshop notes and presentations to identify the progress and challenges in moving four case study countries (the Democratic Republic of the Congo, Mozambique, Zambia and Zimbabwe) towards CCD pathways, by exploring experiences from both project and policy levels. To advance institutional support for the development of successful CCD policies, practices and partnerships, we conclude that there is a need for: (a) institutional development at the national level to strengthen coordination and more clearly define roles and responsibilities across sectors, based on the identification of capacity and knowledge gaps; (b) partnership development, drawing on key strengths and competences of different stakeholders and emphasising the roles of the private sector and traditional authorities; (c) learning and knowledge-sharing through national and regional fora; and (d) development of mechanisms that permit more equitable and transparent distribution of costs and benefits. These factors can facilitate development of multi-stakeholder, multi-level partnerships that are grounded in community engagement from the outset, helping to translate CCD policy statements into on-the-ground action.     

Use of biological indicators to assess water quality of the Ul River (Portugal)

Diatoms and macroinvertebrates have been extensively used as water quality indicators in Europe for the last two decades. In Portugal, the use of biological indicators to assess water quality in rivers has increased greatly. The aim of this work was to assess the water quality and ecological status of the Ul River in order to evaluate its ability for the establishment of a fluvial beach, using periphytic diatoms and macroinvertebrates as indicators. Four sites were selected along the Ul River. At each site, biological, physical, and chemical parameters were investigated. Epilithic diatoms and macroinvertebrates were sampled. The Specific Polluosensitivity Index and the Biological Diatom Index were applied to diatom data, while for macroinvertebrates, the Iberian Biological Monitoring Working Party (IBMWP) was used. According to the results obtained, it was possible to conclude that up to now, this river does not possess the ideal conditions for the establishment of a fluvial beach. We concluded that epilithic diatoms and macroinvertebrates provided consistent information on water quality assessment and can be used as biological indicators of the water quality in Ul River.     

Copper availability assessment of Cu-contaminated vineyard soils using black oat cultivation and chemical extractants

Grapevines grown on acid soils with low fertility in southern Brazil are treated with intense foliar applications of copper (Cu) fungicides, resulting in an increased level of Cu in the soil and increased toxicity. The present study evaluated the accumulation and bioavailability of Cu, and soils with varying levels of Cu from the main producing regions of southern Brazil were collected. The forms of Cu present in the soil were assessed using chemical extractants; additionally, oat cultivation was performed, reflecting the use of the plant as an indicator of Cu bioavailability. Cu accumulated in the topsoil, mainly in bioavailable forms, and there was also an increase of Cu up to a depth of 0.4 m. Cu was primarily found in the mineral fraction, with apparent saturation of the soil organic matter functional groups. Inceptisol and Alfisol soils with a long history of cupric fungicide application were found to have levels of Cu toxic to oat plants. Furthermore, accumulated copper in Alfisol soil from the Campanha Gaúcha region of the state of Rio Grande do Sul had higher bioavailability compared to Cu accumulated in Inceptisol soil from the Serra Gaúcha region. In addition, the copper concentration in roots was found to serve as an indicator of Cu bioavailability in soil, but not of copper phytotoxicity in plants.     

A review on human attitudes towards reptiles in Brazil

For many millennia humans and reptiles have interacted, but the attitude of humans towards these animals has depended on culture, environment, and personal experience. At least 719 reptile species are known to occur in Brazil and about 11% of this fauna has been exploited for many different purposes, including bushmeat, leather, ornamental and magic/religious uses, and as folk medicines. Brazil can therefore serve as an interesting case study for better understanding reptile use by human societies, and the present paper catalogues some of the reptile species being used in Brazil and discusses implications for their conservation. A literature review indicated that 81 reptile species are culturally important in this country, with 47 (58%) species having multiple uses, 54 being used for medicinal purposes, 38 as food, 28 for ornamental or decorative purposes, 20 used in magic/religious practices, 18 as pets, and 40 are commonly killed when they come into contact with humans. Regarding their conservation status, 30 (37.5%) are included on State's Red List, Brazilian Red List or the IUCN Red List. There are many forms of interaction between reptiles and humans in Brazil-although most of them are quite negative in terms of wildlife conservation-which reinforces the importance of understanding such uses and interactions in the context of protecting reptiles in Brazil. A better understanding of the cultural, social, and traditional roles of these reptiles is fundamental to establishing management plans for their sustainable use.