Assessment of Jatropha curcas L. biodiesel seed cake toxicity using the zebrafish (Danio rerio) embryo toxicity (ZFET) test

Consequent to the growing demand for alternative sources of energy, the seeds from Jatropha curcas remain to be the favorite for biodiesel production. However, a significant volume of the residual organic mass (seed cake) is produced during the extraction process, which raises concerns on safe waste disposal. In the present study, we assessed the toxicity of J. curcas seed cake using the zebrafish (Danio rerio) embryotoxicity test. Within 1-h post-fertilization (hpf), the fertilized eggs were exposed to five mass concentrations of J. curcas seed cake and were followed through 24, 48, and 72 hpf. Toxicity was evaluated based on lethal endpoints induced on zebrafish embryos namely egg coagulation, non-formation of somites, and non-detachment of tail. The lowest concentration tested, 1 g/L, was not able to elicit toxicity on embryos whereas 100 % mortality (based also on lethal endpoints) was recorded at the highest concentration at 2.15 g/L. The computed LC50 for the J. curcas seed cake was 1.61 g/L. No further increase in mortality was observed in the succeeding time points (48 and 72 hpf) indicating that J. curcas seed cake exerted acute toxicity on zebrafish embryos. Sublethal endpoints (yolk sac and pericardial edema) were noted at 72 hpf in zebrafish embryos exposed to higher concentrations. The observed lethal endpoints induced on zebrafish embryos were discussed in relation to the active principles, notably, phorbol esters that have remained in the seed cake even after extraction.     

Organochlorine bioaccumulation and biomarkers levels in culture and wild white seabream (Diplodus sargus)

Persistent organic pollutants (POPs), which can accumulate in the adipose fish tissues, can enter the human food chain through the consumption of fish, and cause risk to health. The use of chemical analysis, and biochemical and cellular responses is a way to detect the impact of pollutants in aquatic systems. The purpose of this study was to investigate the levels of organochlorine compounds (polychlorinated biphenyls - PCB and p,p'-dichlorodiphenyltrichloroethane and its metabolites - tDDT) in, wild and cultivated, white seabream (Diplodus sargus), and also its biological effects that were evaluated by assessing the activity of biotransformation enzymes and genotoxic effects. To achieve that we have sampled five different size classes (I - 13 g, II - 64 g, III - 143 g, IV - 315 g and V - 441 g) of white seabream from a local aquaculture, and also a group of wild fish (375g) in order to compare accumulation and responses between cultured and wild fish. White seabream, cultured and wild, presented low levels of organochlorine content, both in liver and in muscle. Wild white seabream, in comparison to cultured ones at the marketable size, showed lower organochlorine accumulation. Biotransformation enzymes showed negative correlations with organochlorine levels in liver. Micronucleous numbers revealed that wild white seabream are not so exposed to genotoxic compounds as cultured ones.     

Vapor intrusion risk evaluation using automated continuous chemical and physical parameter monitoring

Vapor intrusion risk characterization efforts are challenging due to complexities associated with background indoor air constituents, preferential subsurface migration pathways, and representativeness limitations associated with traditional randomly timed time‐integrated sampling methods that do not sufficiently account for factors controlling concentration dynamics. The U.S. Environmental Protection Agency recommends basing risk related decisions on the reasonable maximum exposure (RME). However, with very few exceptions, practitioners have not been applying this criterion. The RME will most likely occur during upward advective flux conditions. As such, for RME determinations, it is important to sample when upward advective flux conditions are occurring. The most common vapor intrusion assessment efforts include randomly timed sample collection events, and therefore do not accurately yield RME estimates. More specifically, researchers have demonstrated that randomly timed sampling schemes can result in false negative determinations of potential risk corresponding to RMEs. For sites experiencing trichloroethylene (TCE) vapor intrusion, the potential for acute risks poses additional challenges, as there is a critical need for rapid response to exposure exceedances to minimize health risks and liabilities. To address these challenges, continuous monitoring platforms have been deployed to monitor indoor concentrations of key volatile constituents, atmospheric pressure, and pressure differential conditions that can result in upward toxic vapor transport and entry into overlying buildings. This article demonstrates how vapor intrusion RME‐based risks can be successfully and efficiently determined using continuous monitoring of concentration and parameters indicating upward advective chemical flux. Time series analyses from multiple selected 8‐ and 24‐hr time increments during upward advective TCE flux conditions were performed to simulate results expected from the most commonly employed sampling methods. These analyses indicate that, although most of the selected time increments overlap within the same 24‐hr window, results and conclusions vary. As such, these findings demonstrate that continuous monitoring of concentration and parameters such as differential pressure and determination of a time‐weighted concentration average over a selected duration when upward advective flux is occurring can allow for a realistic RME‐based risk estimate.     

A model-based assessment of the environmental impact of land-use change across scales in Southern Amazonia

Regional Environmental Change - This article describes the design of a new model-based assessment framework to identify and analyse possible future trajectories of agricultural development and...     

Biological index based on epiphytic diatom assemblages is more restrictive than the physicochemical index in water assessment on an Amazon floodplain,Brazil

Environmental Science and Pollution Research - Canadian Water Quality Index (CWQI) provides protection for freshwater life promoting healthy ecosystems and safeguarding human health. Biological...     

Changes in the flood regime of S?o Francisco River (Brazil) from 1940 to 2006

Flow regulation causes various environmental impacts in the downstream reaches of impounded rivers. The S?o Francisco River (SF) basin is Brazil’s third most important watershed. Several dams have been built in its course in the last four decades, mostly for flow regulation and hydropower generation. This paper presents an evaluation of historical changes in the flood regime. Three regions of the SF River basin, which are under the influence of different levels of regulation, were studied: the lower, middle, and upper SF River. The components of magnitude, frequency, and duration of floods were quantified for each region from 1940 to 1960 (prior to the construction of the first dam) and from 1986 to 2006 (after the last dam). The results have shown the inexistence of big floods in the downstream areas, decreasing durations of small floods as well as significant changes in the annual seasonality of floods. Reductions in the flood frequency were verified in all stretches, even in non-regulated systems, such as the lower Velhas River. The climate variation, which occurred in both period, was not able to explain the changes in the flood regime of S?o Francisco River; therefore, dams and other anthropogenic activity are the main factors promoting the temporal variability of streamflows in the S?o Francisco basin.     

Environmental impacts caused by cemeteries and crematoria,new funeral technologies,and preferences of the Northeastern and Southern Brazilian population as for the funeral process

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population—those who were interviewed—due to their benefits.