Removal of Microcystins by Phototrophic Biofilms. A Microcosm Study (6 pp)

Background, Aims and Scope Microcystins (MCs) are a family of natural toxins produced by cyanobacteria (blue-green algae). As a result of eutrophication, massive cyanobacterial blooms occur more frequently and MCs represent important contaminants of freshwater ecosystems. Bacterial biodegradation is considered a main mechanism for MC breakdown in environmental conditions. While existing studies were mostly focused on MC biodegradation by planktonic bacteria, our experiments examined the fate and kinetics of MC degradation in river-originated phototrophic biofilms and investigated factors influencing the rate of MC removal. Methods The fate of dissolved MCs was studied in laboratory microcosms with different composition (containing water only, water with phytoplankton and/or phototrophic biofilms). Biofilms originated from river ecosystem were pre-incubated under various conditions (with/without presence of cyanobacterial biomass or model organic substrates: glucose and protein - casein). Changes in MC concentration (0-14 days) in water columns were measured by HPLC DAD after external additions of purified MCs (160 μg L-1, MC-LR and MC YR), and halftimes (t1/2) of MC removal were estimated. Results and Discussion The slow degradation of MC was revealed in tap water (t1/2 ~ 14 days) and river water without cyanobacteria (t1/2 ~ 8 days). Enhanced removal occurred in the presence of natural planktonic cyanobacteria (t1/2 ~ 44 h), most probably due to microorganisms associated with the biomass of cyanobacterial bloom. More rapid MC elimination occurred in the variants containing phototrophic biofilms, and was particularly pronounced at those biofilms pre-cultivated in the presence of cyanobacterial blooms (t1/2 ~ 20 h). Much slower removal was observed in the variants simulating possible substrate-dependent induction of microorganism metabolism (biofilms pre-incubated with glucose: t1/2 ~ 35 h, and casein: t1/2 ~ 80 h). After termination of experiments, total amounts of MCs accumulated in the biofilms were below 5% of the initial toxin level revealing significant biodegradation processes. Conclusion The microcosm studies contributed to understanding of the environmental fate of MCs and revealed a rapid biodegradation by phototrophic biofilms. The rate of MC elimination depends on history of biofilm community, previous contact with cyanobacteria seems to be a selective factor improving the biodegradation potential. Recommendation and Outlook Our results experimentally showed a positive role of biofilms in MC elimination during water treatment processes such as bank filtration or slow sand filtration, and could eventually serve for further research of biofilm-based technological applications for MCs removal in small-scale drinking water treatment facilities.     

The analysis of soil cores polluted with certain metals using the Box-Cox transformation

To define the soil properties for a given area or country including the level of pollution, soil survey and inventory programs are essential tools. Soil data transformations enable the expression of the original data on a new scale, more suitable for data analysis. In the computer-aided interactive analysis of large data files of soil characteristics containing outliers, the diagnostic plots of the exploratory data analysis (EDA) often find that the sample distribution is systematically skewed or reject sample homogeneity. Under such circumstances the original data should be transformed. The Box-Cox transformation improves sample symmetry and stabilizes spread. The logarithmic plot of a profile likelihood function enables the optimum transformation parameter to be found. Here, a proposed procedure for data transformation in univariate data analysis is illustrated on a determination of cadmium content in the plough zone of agricultural soils. A typical soil pollution survey concerns the determination of the elements Be (16 544 values available), Cd (40 317 values), Co (22 176 values), Cr (40 318 values), Hg (32 344 values), Ni (34 989 values), Pb (40 344 values), V (20 373 values) and Zn (36 123 values) in large samples.     

A Biogeochemical Comparison of Two Well-Buffered Catchments with Contrasting Histories of Acid Deposition

Much of the biogeochemical cycling research in catchments in the past 25 years has been driven by acid deposition research funding. This research has focused on vulnerable base-poor systems; catchments on alkaline lithologies have received little attention. In regions of high acid loadings, however, even well-buffered catchments are susceptible to forest decline and episodes of low alkalinity in streamwater. As part of a collaboration between the Czech and U.S. Geological Surveys, we compared biogeochemical patterns in two well-studied, well-buffered catchments: Pluhuv Bor in the western Czech Republic, which has received high loading of atmospheric acidity, and Sleepers River Research Watershed in Vermont, U.S.A., where acid loading has been considerably less. Despite differences in lithology, wetness, forest type, and glacial history, the catchments displayed similar patterns of solute concentrations and flow. At both catchments, base cation and alkalinity diluted with increasing flow, whereas nitrate and dissolved organic carbon increased with increasing flow. Sulfate diluted with increasing flow at Sleepers River, while at Pluhuv Bor the sulfate-flow relation shifted from positive to negative as atmospheric sulfur (S) loadings decreased and soil S pools were depleted during the 1990s. At high flow, alkalinity decreased to near 100 μeq L^-1 at Pluhuv Bor compared to 400 μeq L^-1 at Sleepers River. Despite the large amounts of S flushed from Pluhuv Bor soils, these alkalinity declines were caused solely by dilution, which was greater at Pluhuv Bor relative to Sleepers River due to greater contributions from shallow flow paths at high flow. Although the historical high S loading at Pluhuv Bor has caused soil acidification and possible forest damage, it has had little effect on the acid/base status of streamwater in this well-buffered catchment.     

What Anthropogenic Radionuclides (90Sr and 137Cs in Atmospheric Deposition, Surface Soils and Aeolian Dusts Suggest for Dust Transport over Japan

Currently, atmospheric anthropogenic radionuclides (particulate) are controlled by suspension of the surface dust containing those radionuclides (resuspension). We have found, therefore, that such radionuclides can be used as tracers of the surface dust suspension, transport and its subsequent deposition in distant areas. The ¹³⁷Cs/⁹⁰Sr activity ratios in the atmospheric deposition, without the direct influence of nuclear tests and accidents, at the Meteorological Research Institute (MRI, Tsukuba, Japan) during the 1990s were fairly low (average: 2.1). This value is not in agreement with the ratios in Japanese surface soils (range of averages: 4–7), which had been considered as the primary source of the deposited dust. This suggests that the current atmospheric dust deposition in Japan is a mixture of local and remote components. The remote component could be an aeolian dust that has been transported long distances from arid areas. The major component is most likely to be Asian dust. It was further hypothesized that other remote source may exist beyond the Asian domain, based on accumulated observations and model results. To obtain more information about the dust transport, Sahara dust deposited in Monaco in 2002 and a suspended dust collected in the Taklamakan area in 2001 were analyzed for ⁹⁰Sr and ¹³⁷Cs. The Taklamakan dust exhibited a ¹³⁷Cs/⁹⁰Sr ratio of about 4, which is within the range of atmospheric deposition observed at the MRI, while the Sahara dust exhibited a higher ¹³⁷Cs/⁹⁰Sr ratio (about 13). Although the present Sahara datum was negative for our hypothesis of ‘hyper-range transport’, the seasonal change of the ¹³⁷Cs/⁹⁰Sr ratio in the atmospheric deposition observed at the MRI requires an aeolian dust source having a low ¹³⁷Cs/⁹⁰Sr ratio, other than Asian dust.     

Assessment of sperm competition by European bitterling,<Emphasis Type="Italic"> Rhodeus sericeus</Emphasis>

We investigated male assessment of sperm competition in the bitterling, Rhodeus sericeus, a freshwater fish that spawns on the gills of living unionid mussels. Field experiments showed males increased their inspection rate of mussels into which a testis solution containing sperm had been experimentally released. Males avoided leading females to mussels that contained high numbers of embryos, but did not alter their leading behavior in response to the presence of sperm. In laboratory experiments males also increased their inspection rate of mussels into which a testis solution had been released and also failed to alter their leading behavior in response to the presence of sperm in mussels. However, males avoided leading females to mussels in close proximity to other males, and thereby may avoid sperm competition. In a second field study, territorial males were shown to ejaculate into mussels at a low rate in the absence of competitors, increase the frequency of ejaculations in competition with a rival, then decrease relative ejaculate expenditure as the number of competing males increased. Observed data were shown to be significantly correlated with predicted estimates of ejaculate expenditure for a model of sperm competition intensity. We discuss our results in the context of adaptive responses of males to sperm competition.     

Changes in cadmium mobility during composting and after soil application

The effect of twelve weeks of composting on the mobility and bioavailability of cadmium in six composts containing sewage sludge, wood chips and grass was studied, along with the cadmium immobilization capacity of compost. Two different soils were used and Cd accumulation measured in above-ground oat biomass (Avena sativa L.). Increasing pH appears to be an important cause of the observed decreases in available cadmium through the composting process. A pot experiment was performed with two different amounts of compost (9.6 and 28.8 g per kg of soil) added into Fluvisol with total Cd 0.255 mg kg^?1, and contaminated Cambisol with total Cd 6.16 mg kg^?1. Decrease of extractable Cd (0.01 mol l^?1 CaCl₂) was found in both soils after compost application. The higher amount of compost immobilized an exchangeable portion of Cd (0.11 mol l^?1 CH₃COOH extractable) in contaminated Cambisol unlike in light Fluvisol. The addition of a low amount of compost decreased the content of Cd in associated above-ground oat biomass grown in both soils, while a high amount of compost decreased the Cd content in oats only in the Cambisol.     

Comparison of extraction methods for polycyclic aromatic hydrocarbon determination in sediments

Different sample preparation methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in lake and river sediments were compared and evaluated. Freeze‐dried sediment materials were extracted using Soxhlet extraction, ultrasonic agitation and digestion with various solvents and solvent mixtures. Similarly, clean‐up methods using various types of sorbents for separation of PAHs tested.

The following method gives the best results for the determination of PAHs: freeze‐dried sediment samples were extracted using Soxhlet extractor with dichloromethane (6 hr, dark), extracts were cleanup using Silica gel and a mixture of n‐hexa‐ne‐dichloromethane was used for the elution of PAHs.

This method was used for the determination of 7 selected PAHs in sediment samples from Finnish lakes and Czech streams.