A simplified approach to the indirect evaluation of the chemical composition of atmospheric aerosols from PM mass concentrations

The present work shows a straightforward procedure to indirectly estimate the chemical composition at a given site only from the determination of the PM concentrations, and the classification of the days according to the main meteorological scenarios. A previous study based on the mean chemical composition associated to the main meteorological scenarios is required.This experiment has been carried out with data from two monitoring sites in the North-Western Mediterranean, one regional and one suburban background. At both sites, one-year datasets on chemical PM₁₀ composition were obtained. Based on these datasets, the mean PM₁₀ compositions according to the most relevant meteorological situations were calculated for both locations. After that, the reconstruction of the chemical composition for all the days with available PM₁₀ concentrations was completed. Subsequently, the estimated PM₁₀ composition was compared with that determined experimentally. The comparison between the rebuilt and the experimental results was very satisfactory in the case of the regional background site, and relatively replaced in the other case. Furthermore, the validation of the method at the regional background site has been conducted from the reconstruction of a 4-year data base, and subsequent comparison with the experimental chemical composition.Our results show that it is possible to attain a good approach to the chemical composition at regional background sites, where local emission sources are negligible. Conversely, when the local sources rise in importance, i.e., at a suburban background site, the approach is suitable only for those components with a more regional origin and/or those from long range transport of air masses.     

Distributions of radionuclide sorption coefficients (Kd) in sub-surface sediments and the implications for transport calculations

The effect of the spatial variability of K_d on calculations of contaminant travel time in the vadose zone was determined. Depth discrete measurements of K_d were made for a suite of radionuclides (¹⁰⁹Cd, ⁵⁷Co, ⁶⁰Co, ⁸⁵Sr, ¹³⁷Cs, and ⁸⁸Y) utilizing a sediment core from the E-Area at the Savannah River Site. The K_d’s were ordered as ⁸⁵Sr²⁺ < ¹³⁷Cs⁺ < ¹⁰⁹Cd²⁺ < ⁵⁷Co²⁺ = ⁶⁰Co²⁺ << ⁸⁸Y³⁺ and the values generally fell below or near the lowest quartile of values reported in the literature. Correlations were generally weak between soil properties and K_d values. Most importantly, all of the K_d distributions could be reasonably approximated as log-normal. Deterministic and stochastic calculations of contaminant travel time to the water table were made. The deterministic calculations were based on each of three conceptual models of the vadose zone: complete stratification (17 strata, each with a different K_d), two strata (two sections of the vadose zone, each characterized by a single, average K_d), and unstratified (a single zone with an average K_d). Stochastic calculations were based on log-normal fits to the K_d data. The two strata model generally yielded travel times 2× greater than those in the completely stratified model. The unstratified model yielded travel times that were between 3 and 5 times greater than the completely stratified model. The stochastic mean travel times were comparable to those of the two strata model.     

Variation of radiation level and radionuclide enrichment in high background area

Significantly high radiation level and radionuclide concentration along Quilon beach area of coastal Kerala have been reported by several investigators. Detailed gamma radiation level survey was carried out using a portable scintillometer. Detailed studies on radionuclides concentration in different environmental matrices of high background areas were undertaken in the coastal areas of Karunagapalli, Kayankulam, Chavara, Neendakara and Kollam to study the distribution and enrichment of the radionuclides in the region. The absorbed gamma dose rates in air in high background area are in the range 43-17,400 nGyh⁻¹. Gamma radiation level is found to be maximum at a distance of 20 m from the sea waterline in all beaches. The soil samples collected from different locations were analysed for primordial radionuclides by gamma spectrometry. The activity of primordial radionuclides was determined for the different size fractions of soil to study the enrichment pattern. The highest activity of ²³²Th and ²²⁶Ra was found to be enriched in 125-63 μ size fraction. The preferential accumulation of ⁴⁰K was found in <63 μ fraction. The minimum ²³²Th activity was 30.2 Bq kg⁻¹, found in 1000-500 μ particle size fraction at Kollam and maximum activity of 3250.4 Bq kg⁻¹ was observed in grains of size 125-63 μ at Neendakara. The lowest ²²⁶Ra activity observed was 33.9 Bq kg⁻¹ at Neendakara in grains of size 1000-500 μ and the highest activity observed was 482.6 Bq kg⁻¹ in grains of size 125-63 μ in Neendakara. The highest ⁴⁰K activity found was 1923 Bq kg⁻¹ in grains of size <63 μ for a sample collected from Neendakara. A good correlation was observed between computed dose and measured dose in air. The correlation between ²³²Th and ²²⁶Ra was also moderately high. The results of these investigations are presented and discussed in this paper.     

Effect of water treatment residuals on soil phosphorus, copper and aluminium availability and toxicity

Water treatment residuals (WTRs) are produced by the treatment of potable water with coagulating agents. Beneficial recycling in agriculture is hampered by the fact that WTRs contain potentially toxic contaminants (e.g. copper and aluminium) and they bind phosphorus strongly. These issues were investigated using a plant bioassay (Lactuca sativa), chemical extractions and an isotopic dilution technique. Two WTRs were applied to an acidic and a neutral pH soil at six rates. Reductions in plant growth in amended soils were due to WTR-induced P deficiency, rather than Al or Cu toxicity. The release of potentially toxic Al from WTRs was found to be mitigated by their alkaline nature and pH buffering capacity. However, acidification of WTRs was shown to release more soluble Al than soil naturally high in Al. Copper availability was relatively low in all treatments. However, the lability of WTR-Cu increased when the WTR was applied to the soil.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs).     

Predicting molybdenum toxicity to higher plants: Estimation of toxicity threshold values

Four plant species (oilseed rape, Brassica napus L.; red clover, Trifolium pratense L.; ryegrass, Lolium perenne L.; and tomato, Lycopersicon esculentum L.) were tested on ten soils varying widely in soil properties to assess molybdenum (Mo) toxicity. A larger range (66-fold-609-fold) of added Mo concentrations resulting in 50% inhibition of yield (ED₅₀) was found among soils than among plant species (2-fold-38-fold), which illustrated that the soils differed widely in the expression of Mo toxicity. Toxicity thresholds based on soil solution Mo narrowed the variation among soils compared to thresholds based on added Mo concentrations. We conclude that plant bioavailability of Mo in soil depends on Mo solubility, but this alone did not decrease the variability in observed toxicity enough to be used in risk assessment and that other soil properties influencing Mo toxicity to plants need to be considered.     

Polybrominated diphenyl ethers and their methoxylated metabolites in anchovy (<Emphasis Type="Italic">Coilia</Emphasis> sp.) from the Yangtze River Delta,China

Background, aim, and scope  

Polybrominated diphenyl ethers (PBDEs) and their metabolites are toxic to animals, and concentrations of the PBDEs metabolites can exceed those of the parent materials. But no information was available on concentrations of PBDEs metabolites in the lower Yangtze River in the region around Jiangsu Province of China, which is heavily urbanized and industrialized area. The aims of this study were to determine whether PBDEs and their methoxylated PBDEs (MeO-PBDEs) were accumulated in Coilia sp. in this area and to investigate the potential sources for these two kinds of brominated organic pollutants.     

Quantitative evaluation of the chilled-ammonia process for CO2 capture using thermodynamic analysis and process simulation

There is strong world-wide interest in developing new and improved processes for post-combustion capture of CO₂, often using chemical absorption. Developers of new processes make positive claims for their proposals in terms of low energy consumption, but these are usually difficult to validate. This paper demonstrates that rigorous application of thermodynamic analysis and process simulation provides a powerful way to quantitatively estimate the energy requirements of CO₂-capture processes by applying the methodology to the analysis and evaluation of the chilled-ammonia process.