Quantifying methane emission from fugitive sources by combining tracer release and downwind measurements – A sensitivity analysis based on multiple field surveys

Using a dual species methane/acetylene instrument based on cavity ring down spectroscopy (CRDS), the dynamic plume tracer dispersion method for quantifying the emission rate of methane was successfully tested in four measurement campaigns: (1) controlled methane and trace gas release with different trace gas configurations, (2) landfill with unknown emission source locations, (3) landfill with closely located emission sources, and (4) comparing with an Fourier transform infrared spectroscopy (FTIR) instrument using multiple trace gasses for source separation. The new real-time, high precision instrument can measure methane plumes more than 1.2 km away from small sources (about 5 kg h^?1) in urban areas with a measurement frequency allowing plume crossing at normal driving speed. The method can be used for quantification of total methane emissions from diffuse area sources down to 1 kg per hour and can be used to quantify individual sources with the right choice of wind direction and road distance. The placement of the trace gas is important for obtaining correct quantification and uncertainty of up to 36% can be incurred when the trace gas is not co-located with the methane source. Measurements made at greater distances are less sensitive to errors in trace gas placement and model calculations showed an uncertainty of less than 5% in both urban and open-country for placing the trace gas 100 m from the source, when measurements were done more than 3 km away. Using the ratio of the integrated plume concentrations of tracer gas and methane gives the most reliable results for measurements at various distances to the source, compared to the ratio of the highest concentration in the plume, the direct concentration ratio and using a Gaussian plume model. Under suitable weather and road conditions, the CRDS system can quantify the emission from different sources located close to each other using only one kind of trace gas due to the high time resolution, while the FTIR system can measure multiple trace gasses but with a lower time resolution.     

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.     

Long-term individual identification and site fidelity of white sharks, <Emphasis Type="Italic">Carcharodon carcharias</Emphasis>, off California using dorsal fins

Mark-recapture techniques can be used to estimate white shark (Carcharodon carcharias) population abundance. These frameworks are based on assumptions that marks are conserved and animals are present at the sampling location over the entire duration of the study. Though these assumptions have been validated across short-time scales for white sharks, long-term studies of population trends are dependent on these assumptions being valid across longer periods. We use 22 years of photographic data from aggregation sites in central California to support the use of dorsal fin morphology as long-term individual identifiers. We identified five individuals over 16–22 years, which support the use of dorsal fins as long-time individual identifiers, illustrate strong yearly site fidelity to coastal aggregation sites across extended time periods (decades), and provide the first empirical validation of white shark longevity >22 years. These findings support the use of fin morphology in mark-recapture frameworks for white sharks.     

Host acceptance behaviour of the small ermine moth Yponomeuta cagnagellus: larvae and adults use different stimuli

Summary. The sugar alcohol dulcitol is a strong feeding stimulant for larvae of the small ermine moth Yponomeuta cagnagellus. In this paper we tested the hypothesis that dulcitol also acts as an oviposition stimulant for this species. We found that the sugar-alcohol dulcitol was present on the surface of the host Euonymus europaeus. We also showed that (as yet unidentified compounds) can be systemically transferred (i.e. by uptake and transport via the vascular system) from E. europaeus, to the non-host Crataegus monogyna and stimulate oviposition. However, no evidence was found that this stimulatory activity was due to dulcitol. Systemic enrichment of C. monogyna with dulcitol did not induce oviposition on this plant. Neither was the application of pure dulcitol on artificial twigs effective. In addition it was shown that when dulcitol was removed from host plant extracts, oviposition stimulatory activity was retained in the fraction without dulcitol. Synergism between dulcitol and other stimulants could not be demonstrated, however, high concentrations of dulcitol in combination with the main stimulant(s) showed a trend towards enhanced oviposition. It is concluded that the sugar alcohol dulcitol can only play a limited role in adult host acceptance behaviour. The hypothesis that a host shift in the genus Yponomeuta from Celastraceae to Rosaceae might have been facilitated by the presence of small amounts of dulcitol in Rosaceae therefore needs to be restricted to larval feeding behaviour. Received 20 August 1999; accepted 6 December 1999     

Data fusion modeling for groundwater systems

Engineering projects involving hydrogeology are faced with uncertainties because the earth is heterogeneous, and typical data sets are fragmented and disparate. In theory, predictions provided by computer simulations using calibrated models constrained by geological boundaries provide answers to support management decisions, and geostatistical methods quantify safety margins. In practice, current methods are limited by the data types and models that can be included, computational demands, or simplifying assumptions. Data Fusion Modeling (DFM) removes many of the limitations and is capable of providing data integration and model calibration with quantified uncertainty for a variety of hydrological, geological, and geophysical data types and models. The benefits of DFM for waste management, water supply, and geotechnical applications are savings in time and cost through the ability to produce visual models that fill in missing data and predictive numerical models to aid management optimization. DFM has the ability to update field-scale models in real time using PC or workstation systems and is ideally suited for parallel processing implementation. DFM is a spatial state estimation and system identification methodology that uses three sources of information: measured data, physical laws, and statistical models for uncertainty in spatial heterogeneities. What is new in DFM is the solution of the causality problem in the data assimilation Kalman filter methods to achieve computational practicality. The Kalman filter is generalized by introducing information filter methods due to Bierman coupled with a Markov random field representation for spatial variation. A Bayesian penalty function is implemented with Gauss–Newton methods. This leads to a computational problem similar to numerical simulation of the partial differential equations (PDEs) of groundwater. In fact, extensions of PDE solver ideas to break down computations over space form the computational heart of DFM. State estimates and uncertainties can be computed for heterogeneous hydraulic conductivity fields in multiple geological layers from the usually sparse hydraulic conductivity data and the often more plentiful head data. Further, a system identification theory has been derived based on statistical likelihood principles. A maximum likelihood theory is provided to estimate statistical parameters such as Markov model parameters that determine the geostatistical variogram. Field-scale application of DFM at the DOE Savannah River Site is presented and compared with manual calibration. DFM calibration runs converge in less than 1 h on a Pentium Pro PC for a 3D model with more than 15,000 nodes. Run time is approximately linear with the number of nodes. Furthermore, conditional simulation is used to quantify the statistical variability in model predictions such as contaminant breakthrough curves.     

环境协议:欧洲委员会的政策与计划

欧洲委员会已经编制了关于有效使用"环境协议"的指导准则.这些指导准则旨在提高此类协议的透明度和可信度--尤其通过公布这些协议、确定明确目标、和可靠监测.欧洲委员会与欧洲工业界之间的环境协议是有潜力的.当取得更多的经验时,欧共体各机构将需要商定各自在协议谈判与缔结方面的作用.欧共体也力求拓宽各成员国利用环境协议实施环境指令的选择.     

Long-Term Effects of Logging on African Primate Communities: a 28-Year Comparison From Kibale National Park, Uganda

Abstract: If logging is to be compatible with primate conservation, primate populations must be expected to recover from the disturbance and eventually return to their former densities. Surveys conducted over 28 years were used to quantify the long-term effects of both low- and high-intensity selective logging on the density of the five common primates in Kibale National Park, Uganda. The most dramatic exception to the expectation that primate populations will recover following logging was that group densities of Cercopithecus mitis and C. ascanius in the heavily logged area continued to decline decades after logging. Procolobus tephrosceles populations were recovering in the heavily logged areas, but the rate of increase appeared to be slow (0.005 groups/km² per year). Colobus guereza appeared to do well in some disturbed habitats and were found at higher group densities in the logged areas than in the unlogged area. There was no evidence of an increase in Lophocebus albigena group density in the heavily logged area since the time of logging, and there was a tendency for its population to be lower in heavily logged areas than in lightly logged areas. In contrast to the findings from the heavily logged area, none of the species were found at a lower group density in the lightly logged area than in the unlogged area, and group densities in this area were not changing at a statistically significant rate. The results of our study suggest that, in this region, low-intensity selective logging could be one component of conservation plans for primates; high-intensity logging, however, which is typical of most logging operations throughout Africa, is incompatible with primate conservation.