Kinetics of the adsorption and desorption of radionuclides of Co, Mn, Cs, Fe, Ag and Cd in freshwater systems: experimental and modelling approaches

The sorption and release kinetics of 54Mn, 58Co, 59Fe, 109Cd, 110mAg and 134Cs by freshwater suspended particles were investigated to better identify the biogeochemical processes involved and to obtain suitable data for improving models describing radionuclide migration in freshwater streams. In order to observe any seasonal variability in the interaction of radionuclides with natural particles, experiments were performed both in winter and in summer during a phytoplanktonic bloom. Two kinetic models are compared in this paper: the "one-step reversible" model, based on the hypothesis that the transfer of radionuclides between water and suspended solids is governed by a reversible reaction, and the "two-successive-step reversible" model, which assumes two distinct types of sites or reactions on the solid phase. The "one-step reversible" model is generally unable to describe properly the exchange kinetics; this result shows that at least two processes are generally involved in radionuclide exchange between water and suspended particles. On the contrary, a model involving the existence of two successive reversible reactions properly simultes both the sorption and release kinetics. The determination of the kinetic coefficients allows quantitative assessment of the relative importance and kinetics of the processes. In particular, it has been shown that, except for Cs and Cd, major fractions of the radionuclides are associated at equilibrium with particulate sites involving strong interactions. The kinetics to reach this equilibrium depend on seasonal conditions, especially for Co and Mn: the transfer of Co and Mn to particulate sites involving strong interactions is much slower in winter. The distribution of the radionuclides between water and particulate sites involving weak interactions also shows seasonal variations for Co, Mn, Fe and Ag: the capacity to associate radionuclides is much higher in summer for Co and Mn, while the inverse tendency is observed for Fe and Ag. For Cs and Cd, no significant seasonal differences were observed.     

The forest frontier in the Global South: Climate change policies and the promise of development and equity

Halting forest loss and achieving sustainable development in an equitable manner require state, non-state actors, and entire societies in the Global North and South to tackle deeply established patterns of inequality and power relations embedded in forest frontiers. Forest and climate governance in the Global South can provide an avenue for the transformational change needed—yet, does it? We analyse the politics and power in four cases of mitigation, adaptation, and development arenas. We use a political economy lens to explore the transformations taking place when climate policy meets specific forest frontiers in the Global South, where international, national and local institutions, interests, ideas, and information are at play. We argue that lasting and equitable outcomes will require a strong discursive shift within dominant institutions and among policy actors to redress policies that place responsibilities and burdens on local people in the Global South, while benefits from deforestation and maladaptation are taken elsewhere. What is missing is a shared transformational objective and priority to keep forests standing among all those involved from afar in the major forest frontiers in the tropics.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01602-1.     

Controlling various contaminants in wastewater effluent through membranes and engineered wetland

For effective wastewater reclamation and water recovery, the treatment of natural and effluent organic matters (NOM and EfOM), toxic anions, and micropollutants was considered in this work. Two different NOM (humic acid of the Suwannee River, and NOM of US and Youngsan River, Korea), and one EfOM from the Damyang wastewater treatment plant, Korea, were selected for investigating the removal efficiencies of tight nanofiltration (NF) and ultrafiltration (UF) membranes with different properties. Nitrate, bromate, and perchlorate were selected as target toxic anions due to their well known high toxicities. Tri-(2-chloroethyl)-phosphate (TCEP), oxybenzone, and caffeine, due to their different K _ow and pK _a values, were selected as target micropollutants. As expected, the NF membranes provided high removal efficiencies in terms of all the tested contaminants, and the UF membrane provided fairly high removal efficiencies for anions (except for nitrate) and the relatively hydrophobic micropollutant, oxybenzon. Through the wetlands, nitrate was successfully removed. Therefore, a fair process of combining membranes with an engineered wetland could be proposed for sustainable wastewater reclamation and optimum control of contaminats.     

Self-build packed-bed bioreactor for rapid and effective BOD estimation

This work demonstrated a simple, low-cost, rapid, and effective biochemical oxygen demand (BOD) estimation system based on a packed-bed bioreactor that can be easily self-built on-site at a particular wastewater treatment plant for continuous monitoring of the influent and effluent. The use of natural microbial consortium that were collected from the target wastewater and immobilized on a cheap porous carrier simply by adhesion resulted in an acceptable accuracy of over 95%. The newly developed semi-continuous operating mode with peak-type signals was shown to be able to continuously estimate BOD at a high flow rate to overcome the flow dependence of the oxygen electrode, limit clogging issues, enhance the response time, and lower the limit of detection. The resulting packed-bed bioreactors could work continuously for 22 h with a coefficient of variance (CoV) of only 1.8% or for 13 h a day for several days with a maximum CoV of 1.4% and their response was observed to be stable over 80 consecutive measurements. They exhibited stable responses at a wide pH range of 6.5–8.5, which is also the recommended range for aerobic wastewater treatment, emphasizing the greater ease of use of natural microorganisms for BOD estimation.

     

Integrated assessment of brick kiln emission impacts on air quality

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35–12.3 kg of CO, 0.52–5.9 kg of SO₂ and 0.64–1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO₂ was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km² out of the 100-km² modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO₂, PM, CO, PM dry deposition flux) were assessed.     

Temporal changes of 7Be, 137Cs and 210Pb activity concentrations in surface air at Monaco and their correlation with meteorological parameters

Results of analysis of ⁷Be, ¹³⁷Cs and ²¹⁰Pb on aerosol filters carried out from 1998 to 2010 in Monaco show that a weak correlation between activity concentrations of these radionuclides in the atmosphere and meteorological parameters has been found for ⁷Be and temperature (r = 0.50), ²¹⁰Pb and temperature and humidity (r = 0.43 and 0.41, respectively), and ¹³⁷Cs and precipitation (r = 0.51). The minimum and maximum ⁷Be activity concentrations were observed during 2000 and 2009, corresponding with the maximum and minimum solar activity, respectively. The maximum ¹³⁷Cs activity concentration found in May-June 1998 was due to the accident at Algeciras in Spain. The deposition velocities of ⁷Be, ¹³⁷Cs and ²¹⁰Pb depended on the precipitation rate, and attained maximum values during dry seasons. The investigated radionuclides may be used as atmospheric tracers, especially in long-term periods.     

Antibiotic contaminants in coastal wetlands from Vietnamese shrimp farming

Background and purpose  

Shrimp culture has been expanded rapidly in recent years in coastal wetland zone of Vietnam due to favorable natural conditions. However, this industry has caused several negative impacts to the environment. One of the critical issues is the excessive application of antibiotics including human medicines. These chemicals could be released from shrimp ponds and then accumulated and contaminated of the ecosystem. This review article discusses a whole range of findings that address various aspects of the usage, occurrence and potentially environmental risks of antibiotics released from shrimp farming, with emphasis on the South Vietnam coastal wetland.     

Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling

Particulate matter (PM) receptor modeling requires specific intensive input data that is always a challenge to produce cost effectively. A well-designed monitoring program is important to collect such PM ambient data in urban areas with diverse and densely distributed sources. This paper presents a general framework for designing such a monitoring program while emphasizing appropriate quality assurance and quality control elements that are particularly applicable where limited resources are available. Topics for discussion include selection of monitoring sites, sampling and analytical techniques, and the uncertainty estimation for ambient concentration input data. The design framework is illustrated by a case study of a monitoring program for PM source apportionment in the Bangkok Metropolitan Region in which 24-h fine and coarse PM samples were collected using two collocated dichotomous samplers. Comparison between black carbon measurements by Smoke Stain reflectometry and Thermal Optical Transmittance method is highlighted.     

Toxicity of imidazolium salt with anion bromide to a phytoplankton Selenastrum capricornutum: effect of alkyl-chain length

Room-temperature ionic liquids are regarded as environmentally benign alternatives to volatile organic solvents. However, the product designs for this promising group of compounds should take account, not only the technological needs, but also the eco-toxicological hazards. Therefore, this study aimed to evaluate the toxicity of some important ionic liquids on the growth of the freshwater alga, Selenastrum capricornutum. The ionic liquids examined in this study included 1-propyl-3-methylimidazolium [PMIM], 1-butyl-3-methylimidazolium [BMIM], 1-hexyl-3-methylimidazolium [HMIM] and 1-octyl-3-methylimidazolium [OMIM] with a bromide anion. The susceptibility of alga to ionic liquids was strongly dependent on the alkyl-chain length. According to our results, a longer alkyl-chain resulted in stronger inhibition of algal growth. In general, the toxicity could be summarized as decreasing in the following order: [OMIM]>[HMIM]>[BMIM]>or=[PMIM]. Among the ionic liquids examined, [OMIM] [Br] was found to be most toxic to S. capricornutum, with EC(50) values ranging from 26.3 microM to 54.9 microM after an incubating time of 96 h. Although [BMIM] [Br] and [PMIM] [Br] was relatively less toxic than [OMIM] and [HMIM], their toxicity increased as increasing the incubation time from 48 h to 96 h. This fact indicates that these kinds of ionic liquids may become more toxic after being released and contacted to freshwater ecosystem.     

Optimizing the performance of phase-change materials in personal protective clothing systems.

Phase-change materials (PCM) can be used to reduce thermal stress and improve thermal comfort for workers wearing protective clothing. The aim of this study was to investigate the effect of PCM in protective clothing used in simulated work situations. We hypothesized that it would be possible to optimize cooling performance with a design that focuses on careful positioning of PCM, minimizing total insulation and facilitating moisture transport. Thermal stress and thermal comfort were estimated through measurement of body heat production, body temperatures, sweat production, relative humidity in clothing and subjective ratings of thermal comfort, thermal sensitivity and perception of wetness. Experiments were carried out using 2 types of PCM, the crystalline dehydrate of sodium sulphate and microcapsules in fabrics. The results of 1 field and 2 laboratory experimental series were conclusive in that reduced thermal stress and improved thermal comfort were related to the amount and distribution of PCM, reduced sweat production and adequate transport of moisture.