两种吹扫捕集浓缩仪在测定土壤VOCs时的性能比较

从仪器精密度、方法检出限、准确度等角度对吹扫捕集浓缩仪Stratum PTC与Eclipse 4660的性能进行比较。结果表明,大部分分析物用Stratum PTC的方法检出限略高于Eclipse 4660,但精密度比Eclipse 4660稍差;Eclipse 4660用于分析极性的、水溶性物质的效果比Stratum PTC好,回收率更高。两种吹扫捕集仪的测试结果均满足《土壤和沉积物挥发性有机物的测定吹扫捕集/气相色谱-质谱法》(HJ 605-2011)标准方法的指标要求。     

Performance of different composting techniques in reducing oestrogens content in manure from livestock in a Vietnamese setting

Steroid oestrogens (SE) are released by humans and animals into the environment. In the Mekong Delta animal excrement is directly discharged into surface water and can pollute the water. Only a few animal production sites are currently treating the excrement in either biogas plants or vermicomposting systems. The concentration of SE in manures from pigs and cattle was monitored in the Mekong Delta, Vietnam. Fresh cow faeces had an oestrogen concentration of 3.3 ng E2 eq/g dry weight. The SE concentration in effluent from biogas plants fed with animal manures was 341 ng E2 eq/L. Most of the SE were in the solid phase (77.9–98.7%). Vermicomposting reduced SE to 95% of the original input.     

Optimal Carbon Capture and Storage Policies

The IPCC recommends the use of carbon capture and sequestration (CCS) technologies in order to achieve the Kyoto environmental goals. This paper sheds light on this issue by assessing the optimal strategy regarding the long-term use of CCS technologies. The aim is to analyze the optimal CCS policy when the sequestration rate is endogenous, being therefore one specific tool of the environmental policy. We develop a simple growth model to identify the main driving forces that should determine the optimal CCS policy. We show that, under some conditions on the cost of extractions, CCS may be a long-term solution to curb carbon emissions. We also show that over time the social planner will choose to decrease the rate of capture and sequestration. We then derive the decentralized equilibrium outcome by considering the programs of the fossil resource-holder and of the representative consumer. Finally, we determine the optimal environmental policy, i.e. the carbon tax scheme, as well as the dynamics of the fossil fuel price needed to implement it.     

Real<Emphasis Type="Bold">-</Emphasis>time water quality monitoring using Internet of Things in SCADA

Water pollution is the root cause for many diseases in the world. It is necessary to measure water quality using sensors for prevention of water pollution. However, the related works remain the problems of communication, mobility, scalability, and accuracy. In this paper, we propose a new Supervisory Control and Data Acquisition (SCADA) system that integrates with the Internet of Things (IoT) technology for real-time water quality monitoring. It aims to determine the contamination of water, leakage in pipeline, and also automatic measure of parameters (such as temperature sensor, flow sensor, color sensor) in real time using Arduino Atmega 368 using Global System for Mobile Communication (GSM) module. The system is applied in the Tirunelveli Corporation (Metro city of Tamilnadu state, India) for automatic capturing of sensor data (pressure, pH, level, and energy sensors). SCADA system is fine-tuned with additional sensors and reduced cost. The results show that the proposed system outperforms the existing ones and produces better results. SCADA captures the real-time accurate sensor values of flow, temperature, and color and turbidity through the GSM communication.     

Development and implementation of eco-genomic tools for aquatic ecosystem biomonitoring: the SYNAQUA French-Swiss program

The effectiveness of environmental protection measures is based on the early identification and diagnosis of anthropogenic pressures. Similarly, restoration actions require precise monitoring of changes in the ecological quality of ecosystems, in order to highlight their effectiveness. Monitoring the ecological quality relies on bioindicators, which are organisms revealing the pressures exerted on the environment through the composition of their communities. Their implementation, based on the morphological identification of species, is expensive because it requires time and experts in taxonomy. Recent genomic tools should provide access to reliable and high-throughput environmental monitoring by directly inferring the composition of bioindicators’ communities from their DNA (metabarcoding). The French-Swiss program SYNAQUA (INTERREG France-Switzerland 2017–2019) proposes to use and validate the tools of environmental genomic for biomonitoring and aims ultimately at their implementation in the regulatory bio-surveillance. SYNAQUA will test the metabarcoding approach focusing on two bioindicators, diatoms, and aquatic oligochaetes, which are used in freshwater biomonitoring in France and Switzerland. To go towards the renewal of current biomonitoring practices, SYNAQUA will (1) bring together different actors: scientists, environmental managers, consulting firms, and biotechnological companies, (2) apply this approach on a large scale to demonstrate its relevance, (3) propose robust and reliable tools, and (4) raise public awareness and train the various actors likely to use these new tools. Biomonitoring approaches based on such environmental genomic tools should address the European need for reliable, higher-throughput monitoring to improve the protection of aquatic environments under multiple pressures, guide their restoration, and follow their evolution.     

Arsenic residue in residential area after cleanup of pesticide illegal dumping sources in Thanh Hoa province,Central Vietnam

In Vietnam, Nicotex's site is perhaps the most infamous case of illegal disposal of toxic pesticides near residential areas. In 2013, affected villagers discovered illegal burials of around 1,000 tons of expired pesticides in the Nicotex factory. Organic pesticides were detected in illegal burial areas (IBAs) around 60 times greater than acceptable levels, but no attention was paid to contamination of metals, metalloids, and other classes of organic contaminants, which could be co-contaminants in pesticide formulation. This study assessed the contaminants remaining in the IBAs and surrounding residential areas two years after the source removal conducted in 2014. Additionally, a preliminary health risk assessment from residual contaminants was performed. Nine classes of chemicals including parental pesticides, inorganic and organic degradation byproducts, and metals and metalloids, comprising 123 chemicals were quantified in soil, sediment, and water samples from Nicotex and surrounding residential areas. Although concentrations of organic pesticides were below acceptable levels, arsenic contamination in the soil in a Nicotex IBA named NCT5 and Nap village (NV) exceeded the acceptable level. The enrichment factor and log-probability plot indicate that arsenic enrichment at NV is not from natural sources but is associated with arsenic contamination in NCT5. Arsenic may be a co-contaminant in pesticide manufacturing or an arsenical pesticide, such as monosodium methanearsonate. Arsenic found in NV was toxic arsenate for which the preliminary risk assessment yielded an unacceptable excess carcinogenic risk (1 × 10^?4). While all attention was paid to investigate and treat contamination of organic pesticides, it turns out that arsenic is the major existing threat which poses an unacceptable cancer risk in good agreement with the high cancer rate claimed by villagers near Nicotex. This justifies the need for further investigation of the extent of the arsenic contamination and restoration of the contaminated land.     

PCBs,PBDEs and dioxin-related compounds in floor dust from an informal end-of-life vehicle recycling site in northern Vietnam: contamination levels and implications for human exposure

Floor dusts from Vietnamese end-of-life vehicle (ELV)-processing households were investigated to elucidate the contamination levels and exposure risk of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and dioxin-related compounds (DRCs). The concentrations were in order of PBDEs (260–11,000, median 280 ng/g overall) > PCBs (19–2200, median 140 ng/g) > dioxin-like PCBs (8.8–450, median 22 ng/g) ? polybrominated dibenzo-p-dioxin/dibenzofurans (PBDD/Fs, 2000–28,000, median 8500 pg/g) > polychlorinated dibenzo-p-dioxin/dibenzofurans (PCDD/Fs, 440–4100, median 1800 pg/g) > MoBPCDD/Fs (1.9–1200, median 250 pg/g). Concentrations of PCBs and DRCs were higher than those reported for Vietnamese urban houses, indicating ELV processing as a significant source of these contaminants. Higher concentrations of PCBs relative to PBDEs suggest the abundance of old electrical capacitors/transformers in ELVs. The PBDD/F and PCDD/F profiles were indicative of DecaBDE-containing materials and combustion sources, respectively. PBDFs, PCDFs and DL-PCBs were the most important dioxin-like toxic equivalent (TEQ) contributors. The estimated PCB and TEQ intake doses from dust ingestion approached or exceeded the reference doses for children living in some ELV-processing households, indicating potential health risk. More comprehensive risk assessment of the exposure to PCBs and DRCs is required for residents of informal ELV recycling sites.     

Current and future solid waste management system in Northern Viet Nam with focus on Ha Noi: climate change effects and landfill management

The contribution investigates the solid waste management system in Ha Noi under consideration of the interrelation between climate change effects and landfill management by means of a cause-and-effect-analysis as well as water balances using the HELP 3.95 model and gas emission data, followed by a Strength, Weakness, Opportunities, Threats (SWOT) analysis. Even landfills are sources of methane (CH₄) emissions they are also impacted by climate change. The main effects on landfill sites are the change of climatic conditions, namely the regional water balance, extreme precipitation and storm events. The results of the water balance model results show that a geomembrane surface sealing can reduce the leachate formation significantly, a fact that is also valid for the climate change scenario with higher precipitation. The risk of flooding and erosion at the landfill sites increases, which will require a customized water management. In parallel landfill gas offers the opportunity for recovery of Greenhouse Gases (GHG) and the generation of renewable energy. Some further management options are wind turbines, photovoltaic systems or biomass for biogas conversion, which was grown on closed landfill sites. The inclusion of climate friendly management options of closed landfills in a “Good Landfill Aftercare Practice” is recommended.     

Degradation products of profenofos as identified by high-field FTICR mass spectrometry: Isotopic fine structure approach

This study was performed to identify the degradation products of profenofos “a phenyl organothiophosphate insecticide” in raw water (RW) collected from the entry point of Metropolitan Water Works Authority “Bangkaen, Thailand” and ultrapure water (UPW) with and without TiO₂ under simulated sunlight irradiation. Degradation of profenofos was followed with ultrahigh performance liquid chromatography (UHPLC) and follows pseudo first-order kinetic. Accordingly, high-field FTICR mass spectrometry coupled to an electrospray ionization source was used to reveal the degradation routes of profenofos and the isotopic fine structures (IFS) elucidations to approve the chemical structures of its degradation products. More degradation products were detected in UPW as compared to RW. Consequently, two main degradation pathways namely (i) interactive replacements of bromine and hydrogen by hydroxyl functional groups and (ii) rupture of PO, PS, CBr and CCl bonds were observed. None interactive replacement of chlorine by hydroxyl functional group was detected. Accordingly, mechanistical pathways of the main degradation products were established.     

When experts disagree: the need to rethink indicator selection for assessing sustainability of agriculture

Sustainability indicators are well recognized for their potential to assess and monitor sustainable development of agricultural systems. A large number of indicators are proposed in various sustainability assessment frameworks, which raises concerns regarding the validity of approaches, usefulness and trust in such frameworks. Selecting indicators requires transparent and well-defined procedures to ensure the relevance and validity of sustainability assessments. The objective of this study, therefore, was to determine whether experts agree on which criteria are most important in the selection of indicators and indicator sets for robust sustainability assessments. Two groups of experts (Temperate Agriculture Research Network and New Zealand Sustainability Dashboard) were asked to rank the relative importance of eleven criteria for selecting individual indicators and of nine criteria for balancing a collective set of indicators. Both ranking surveys reveal a startling lack of consensus amongst experts about how best to measure agricultural sustainability and call for a radical rethink about how complementary approaches to sustainability assessments are used alongside each other to ensure a plurality of views and maximum collaboration and trust amongst stakeholders. To improve the transparency, relevance and robustness of sustainable assessments, the context of the sustainability assessment, including prioritizations of selection criteria for indicator selection, must be accounted for. A collaborative design process will enhance the acceptance of diverse values and prioritizations embedded in sustainability assessments. The process by which indicators and sustainability frameworks are established may be a much more important determinant of their success than the final shape of the assessment tools. Such an emphasis on process would make assessments more transparent, transformative and enduring.