Absolute principal component analysis of atmospheric aerosols in Mexico city

A receptor model is presented based on absolute principal component analysis (APCA) of elemental concentrations in atmospheric aerosols from Mexico City during the Summer of 1995. Elemental contents on samples collected with a Stacking Filter Unit of the Davis design was carried out using Particle Induced X-ray Emission (PIXE). The sampling device allowed the separation of particles with mean aerodynamic diameters ranging from 2.5 μm to 15 μm (coarse fraction) and smaller than 2.5 μm (fine fraction). Sampling was divided into morning, afternoon and night periods, with higher concentrations being found during the morning. Seasonal variation is observed when comparisons with other studies are carried out. The application of APCA allowed identification of four sources for each fraction, with a soil-derived dust predominance in the coarse one. The influence of meteorological parameters is studied using cluster analysis, showing that during the morning there is a transport of pollutants from the west towards the sampling site, while the night transport corresponds to soil-derived dust from the north.     

An approach to study ultrastructural changes and adaptive strategies displayed by Acinetobacter guillouiae SFC 500-1A under simultaneous Cr(VI) and phenol treatment

Environmental Science and Pollution Research - Acinetobacter guillouiae SFC 500-1A, a native bacterial strain isolated from tannery sediments, is able to simultaneously remove high concentrations...     

Sonophotocatalytic degradation of alazine and gesaprim commercial herbicides in TiO2 slurry

The photocatalytic degradation of alazine and gesaprim commercial herbicides was carried out in aqueous TiO(2) suspensions under UV light (15W, 352 nm). Degradation of these herbicides was also observed by the combined effects of photocatalysis with sonolysis (sonophotocatalysis) using an ultrasound source of 20kHz. Degradation profiles were recorded by measuring the concentration of the active compounds present in the alazine (alachlor and atrazine) and gesaprim (atrazine) by HPLC as a function of irradiation time (sound and/or light). Over 90% of the active component in the gesaprim was abated and those in alazine were completely degraded. The content of total organic carbon and chemical oxygen demand was also monitored. Mineralization of the commercial herbicides was achieved. Over 80% of chemical oxygen demand abatement was attained for both herbicides with sonophotocatalysis at 150 min of irradiation time. The photocatalytic degradation of the herbicides followed a pseudo-first order kinetics and their rate constant was increased by the combined effects of sonolysis.     

Slurry-phase biodegradation of weathered oily sludge waste

We assessed the biodegradation of a typical oily sludge waste (PB401) in Mexico using several regimes of indigenous microbial consortium and relevant bioremediation strategies in slurry-phase system. Abiotic loss of total petroleum hydrocarbons (TPH) in the PB401 was insignificant, and degradation rates under the various treatment conditions ranged between 666.9 and 2168.7 mg kg(-1) day(-1) over a 15 days reaction period, while viable cell count peaked at between log(10)5.7 and log(10)7.4 cfu g(-1). Biostimulation with a commercial fertilizer resulted in 24% biodegradation of the TPH in the oily waste and a corresponding peak cell density of log(10)7.4 cfu g(-1). Addition of non-indigenous adapted consortium did not appear to enhance the removal of TPH from the oily waste. It would appear that the complexities of the components of the alkylaromatic fraction of the waste limited biodegradation rate even in a slurry system.     

Agave salmiana Plant Communities in Central Mexico as Affected by Commercial Use

Agave salmiana is a native plant species harvested for the commercial production of mezcal (Agave spirits) in the highlands of central Mexico. The objective of this study was to identify vegetation changes in natural communities where A. salmiana has been differentially harvested for commercial purposes. Three plant community categories were identified in the state of Zacatecas based on their history of A. salmiana utilization: short (less than 10 years of use), moderate (about 25 years), and long (60 or more years). Species cover, composition, and density were evaluated in field surveys by use category. A gradient of vegetation structure of the communities parallels the duration of A. salmiana use. A. salmiana density was greatest (3,125 plants ha⁻¹) in the short-use areas and less (892 plants ha⁻¹) in the moderate-use areas, associated with markedly greater density of shrubs (200%) and Opuntia spp. (50%) in moderate-use areas. The main shrubs were Larrea tridentata, Mimosa biuncifera, Jatropha dioica and Buddleia scordioides while the main Opuntia species were Opuntia leucotricha and Opuntia robusta. A. salmiana density was least (652 plants ha⁻¹) in the long-use areas where shrubs were less abundant but Opuntia spp. density was 25% higher than in moderate-use areas. We suggest that shrubs may increase with moderate use creating an intermediate successional stage that facilitates the establishment of Opuntia spp. Long-term Agave use is generating new plant communities dominated by Opuntia spp. (nopaleras) as a replacement of the original communities dominated by A. salmiana (magueyeras).     

PM source identification at Sunland Park, New Mexico, using a simple heuristic meteorological and chemical analysis

The causes for evening low-wind PM10 and PM2.5 peaks at Sunland Park, NM, were investigated by using wind sector analysis and by assessing relationships between PM loadings and meteorological parameters through canonical ordination analysis. Both PM10 and PM2.5 concentrations during the evening hours accounted for approximately 50% of their respective 24-hr averages, and the PM10 was mainly composed of coarse material (PM10-2.5 amounted to 77% of PM10). A wind sector analysis based on data from three surface meteorological monitoring stations in the region narrowed the potential source region for PM10 and PM2.5 to an area within a few kilometers south of Sunland Park. Canonical ordination analysis confirmed that the peak frequently occurred under stable conditions with weak southerly winds. Chemical analyses of PM showed that elemental and organic carbon (EC and OC, respectively) dominate PM2.5 and inorganic elements dominate PM10-2.5. The combined data for EC/OC, geologic elements, and various trace elements indicate that under low wind and stable conditions, traffic-related PM emissions (motor vehicle exhausts and re-suspended road dust) from the south of the site are the most likely sources for the evening PM10 and PM2.5 peaks.     

PLA and Organoclays Nanocomposites: Degradation Process and Evaluation of ecotoxicity Using Allium cepa as Test Organism

In this study, nanocomposites of PLA and organoclays Cloisite 20A and Cloisite 30B were prepared by the melt intercalation method and the obtained samples were characterized by transmission electron microscopy (TEM). Since composting is an important proposal to the final disposal of biopolymers, the influence of clays on the hydrolytic degradation process of PLA was evaluated by visual analysis and monitoring of molecular weight after periods of 15 and 30 days of degradation in compost. After degradation of the materials in composting environment, the evaluation of cytotoxic, genotoxic and mutagenic effects of compost aqueous extract was carried out using a bioassay with Allium cepa as test organism. The TEM micrographs permitted the observation of different levels of dispersion, including exfoliated regions. In the evaluation of hydrolytic degradation it was noted that the presence of organoclays can decrease the rate of degradation possibly due to the barrier effect of clay layers and/or the higher degree of crystallinity in the nanocomposite samples. Nevertheless, even in the case of nanocomposites, the molecular weight reduction was significant, indicating that the composting process is favorable to the chain scission of PLA in studied materials. In the analysis performed by the bioassay using A. cepa as test organism, it was found that after degradation of the PLA and its nanocomposites the aqueous extract of compost samples induced a decreasing in the mitotic index and an increasing in the induction of chromosomal abnormalities. These results were statistically significant in relation to the negative control (distilled water). By comparing the results obtained for the nanocomposites in relative to pure polymer, there were no statistically significant differences. The types of the observed chromosomal aberrations indicated a possible genotoxic effect of the materials, which may be related to an aneugenic action of PLA degradation products.