Sensitivity of Mediterranean woody seedlings to copper, nickel and zinc

The restoration of heavy metal contaminated areas requires information on the response of native plant species to these contaminants. The sensitivity of most Mediterranean woody species to heavy metals has not been established, and little is known about phytotoxic thresholds and environmental risks. We have evaluated the response of four plant species commonly used in ecological restoration, Pinus halepensis, Pistacia lentiscus, Juniperus oxycedrus, and Rhamnus alaternus, grown in nutrient solutions containing a range of copper, nickel and zinc concentrations. Seedlings of these species were exposed to 0.048, 1 and 4 microM of Cu; 0, 25 and 50 microM of Ni; and 0.073, 25 and 100 microM of Zn in a hydroponic silica sand culture for 12 weeks. For all four species, the heavy metal concentration increased in plants as the solution concentration increased and was always higher in roots than in shoots. Pinus halepensis and P. lentiscus showed a higher capacity to accumulate metals in roots than J. oxycedrus and R. alaternus, while the allocation to shoots was considerably higher in the latter two. Intermediate heavy-metal doses enhanced biomass accumulation, whereas the highest doses resulted in reductions in biomass. Decreases in shoot biomass occurred at internal concentrations ranging from 25 to 128 microg g-1 of Zn, and 1.7 to 4.1 microg g( -1) of Cu. Nickel phytoxicity could not be established within the range of doses used. Rhamnus alaternus and J. oxycedrus showed higher sensitivity to Cu and Zn than P. halepensis and, especially, P. lentiscus. Contrasted responses to heavy metals must be taken into account when using Mediterranean woody species for the restoration of heavy metal contaminated sites.     

Biochemical responses of the marine mussel Mytilus galloprovincialis to petrochemical environmental contamination along the North-western coast of Portugal

Following the development of urban and industrial centres petrochemical products have become a widespread class of contaminants. The aim of this study was to investigate the effects of petrochemical contamination in wild populations of mussels (Mytilus galloprovincialis) along the NW Atlantic coast of Portugal by applying antioxidant and energetic metabolism parameters as biomarkers. For that, mussels were collected at five sampling sites presenting different petrochemical contamination levels. To evaluate the mussels' antioxidant status, enzymatic activities of catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase, glutathione S-transferases, as well as glutathione redox status were evaluated in gills and digestive glands of mussels collected from the selected sites. Lipid peroxidation was determined in the same tissues to quantify cellular oxidative damage. Furthermore, to investigate how energetic processes may respond to these contaminants, the activity of NADP(+)-dependent isocitrate dehydrogenase was determined in mussels' digestive glands, and octopine dehydrogenase was determined in mussels' posterior adductor muscle. Furthermore, the concentrations of aliphatic hydrocarbons, unresolved complex mixture and polycyclic aromatic hydrocarbons (PAHs) were quantified in mussels' tissue, and abiotic parameters were quantified in water samples collected at each site. Several biomarkers showed statistically significant differences among sampling sites. The redundancy analysis (RDA) used to perform the integrated analysis of the data showed a clear separation of the sampling sites in three different assemblages, which are in agreement with the PAHs levels found in mussels tissues. In addition, the RDA indicated that some of the selected biomarkers may be influenced by abiotic parameters (e.g. salinity, pH, nitrates and ammonia). The approach selected for this study seems to be suitable for monitoring petrochemical contamination.     

Characterization of humic substances of different origin by means of mass spectrometry and neural networks

Mass spectrometry fingerprinting of humic acids extracted from different soils has been carried out using laser desorption/ionization mass spectrometry (LDI-TOF MS). LDI-TOF MS provides characteristic mass spectra fingerprints for the humic acids of different origin. The information given in the fingerprints was evaluated for natural grouping trends in the samples by neural networks computing tools, such as self-organizing feature map (SOFM). This approach is efficient for recognizing patterns in the humic acids samples independently of their characteristic variability; variability characterizing natural products such as humic substances. The use of multi-layer perceptron artificial neural networks gave a successful classification of the samples.     

Factors affecting accumulation of thallium and other trace elements in two wild Brassicaceae spontaneously growing on soils contaminated by tailings dam waste

Thallium is a scarce, highly toxic element. There are several investigations that report Tl accumulation in plants of the family Brassicaceae. These plants could pose a risk in areas where Tl is present at higher concentrations than normal soils. The present study reports analyses of two wild Brassicaceae, Hirschfeldia incana and Diplotaxis catholica, growing spontaneously at five sampling sites moderately polluted with Tl and other trace elements in the Green Corridor of the Guadiamar river, Seville, S. Spain. In general, trace element content was unremarkable in all part plants, despite the concentrations present in soil. Thallium was the only element whose concentration in both plant species was above normal for plants (maximum values of 5.00 mgkg(-1) in H. incana flowers). There were significant positive correlations between total Tl in soil and Tl in both plant species. Transfer Coefficients (TC) for all elements were, in general, <1 for both species, except for Tl in flowers and fruits at some sites. The highest Enrichment Factor (EF) was found for Tl in H. incana fruits (EF = 607) and D. catholica flowers (EF = 321). H. incana was studied in a previous growing season (2004) in the same area, although the rainfall was 3 times more than in the year of the present study (2005), giving a maximum Tl content of 46.5 mgkg(-1) in H. incana flowers. The data presented here show that Tl content of plants growing in semi-arid conditions can be significantly influenced by precipitation. In dry years, plant Tl accumulation may be significantly reduced.     

Mandarin peelings: the best carbon source to produce laccase by static cultures of Trametes pubescens

In the present study, we investigated the effect of different carbon sources (glucose, glycerol and ground mandarin peelings) on laccase production by Trametes pubescens grown on stainless steel sponges under static conditions. The cultures with ground mandarin peelings gave the highest laccase activities, showing values of about 100 U l(-1). This is a very interesting result, since mandarin peelings are common agricultural wastes in some regions such as Mediterranean and Asiatic countries. Therefore, their reutilisation, besides reducing medium cost, also helps to solve the pollution problems caused by their disposal. Also, we studied the effect of supplementing the culture medium with different potential laccase-inducing compounds (ABTS, Tween 20, soya oil, Malaquite Green, Cu(2+), tannic acid) on laccase production. Soya oil was the best inducer of laccase activities, attaining values 4-fold higher than those obtained in the reference cultures.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Ten years measuring PCDDs/PCDFs in ambient air in Catalonia (Spain)

This work summarizes the results of a ten year surveillance programme on PCDD/F in ambient air carried out in Catalonia (Spain). The study has been conducted by the Dioxin Laboratory of Spanish Council for Scientific Research (CSIC) in collaboration with the Environment Department of the Catalonian Government. 175 samples have been collected throughout Catalonia from 1994 to 2004. Different sampling locations classified as industrial, traffic, urban, suburban and rural sites have been monitored in order to find the most contaminated zones as well as the ones with expected background concentrations. The highest concentrations found in this study were determined at the industrial locations. Concentrations ranging from 5 to 1196 fg I-TEQ/m3, with a mean value of 140 fg I-TEQ/m3 and from 10 to 357 fg I-TEQ/m3, with a mean value of 72 fg I-TEQ/m3 were determined in industrial and traffic sampling points, respectively. In contrast, the lowest concentrations were found in rural stations, ranging from 5 to 45 fg I-TEQ/m3, with a mean value of 28 fg I-TEQ/m3. The PCDD/F concentration trend in Catalonian ambient air shown a clear drop of the median values occurred during the study sampling period. A decline of about 70% was observed from 1997-1998 to 2003-2004.     

Enhancement of biodegradation of oil adsorbed on fine soils in a bioslurry reactor

Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.     

Inhibitory effects of catechol accumulation on benzene biodegradation in Pseudomonas putida F1 cultures

The influence of benzene concentration on the specific growth rate (mu), CO(2) and metabolite production, and cellular energetic content (i.e., ATP content), during benzene biodegradation by Pseudomonas putida F1 was investigated. Within the concentration range tested (5-130mg benzene l(-1)) the mu, the specific CO(2) production, and the ATP content remained constant at 0.42-0.48h(-1), 1.86+/-0.21g CO(2) g(-1) biomass, and 5.3+/-0.4x10(-6)mol ATP g(-1) biomass, respectively. Catechol accumulated during process start-up at all tested concentrations. Catechol specific production increased with increasing benzene inlet concentrations. This confirms that the transformation of this intermediate was the limiting step during benzene degradation. It was shown that catechol inhibited both the conversion of benzene to catechol and its further transformation. In addition, catechol concentrations higher than 10mgl(-1) significantly decreased both benzene and catechol associated respiration, confirming the highly inhibitory effect of this intermediate. This inhibitory threshold concentration was approximately two orders of magnitude lower than the concentrations present in the culture medium during process start-up, suggesting that cellular activity was always far below its maximum. Thus, due to its toxic and inhibitory nature and its tendency to accumulate at high benzene loading, catechol must be carefully monitored during process operation.     

Study of biological stabilization processes of cattle and poultry manure by thermogravimetric analysis and (13)C NMR

The biological stabilization process of cattle and poultry manure was studied using thermogravimetric analysis and (13)C nuclear magnetic resonance. The stabilization processes carried out were composting, anaerobic digestion and a mixed process (partly aerobic, partly anaerobic). It was observed from the analyzed samples that the biological stabilization processes reduce the volatile content of the bio-wastes and increase the degree of aromaticity. The stabilization of cattle manure by means of aerobic processes was able to further oxidize and enriched in aromatic compounds the bio-waste when compared with the digestion process. On the other hand, the stabilization of poultry manure resulted in a greater aromatization under the digestion process. Stabilized samples with a high degree of aromaticity presented a lower volatile content accompanied by a reduction in the intensity of the differential thermogravimetry peak registered under an inert atmosphere, indicative of the thermal decomposition of the organic matter. The thermal decomposition of all the analyzed materials (fresh and stabilized samples) commenced at around 200 degrees C but for the digested poultry manure, which decomposition initiated close to 250 degrees C. All stabilized samples yielded a lower degree of volatilization to that one observed in fresh samples.