Packing material formulation for odorous emission biofiltration

In biological gas treatment, like biofiltration of volatile organic compounds or odorous substances, the microbial nutritional needs could be a key factor of the process. The aim of this work is to propose a new packing material able to provide the lacking nutrients. In the first part of this study, two kinds of material composed of calcium carbonate, an organic binder and two different nitrogen sources, ammonium phosphate and urea phosphate (UP), were compared. The new supports present bulk densities between 0.88 and 1.15g cm(-3), moisture retention capacities close to 50% and 70%, and water cohesion capacities greater than six months for the material with 20% binder. In the second part, oxygen consumption measurements in liquid experiments show that these packing materials could enhance bacterial growth compared to pine bark or pozzolan and have no inhibitory effect. The biodegradation of different substrates (sodium sulfide and ammonia) and the support colonization by the biomass were evaluated. Finally, UP 20 was chosen and tested in a hydrogen sulfide or ammoniac biofiltration process. This showed that, for H2S concentrations greater than 100mg m(-3), UP 20 has a real advantage over pine bark or pozzolan.     

Variability of Musculoskeletal Strain on Dentists: An Electromyographic and Goniometric Study

Introduction. Dentists and hygienists are strongly affected by musculoskeletal disorders (MSDs). As workstation concepts are supported by subjective arguments only, the aim of this study was to use objective measurements to compare the variability of strain in various concepts: a dental chair equipped with a cart or an over-the-patient delivery system without an assistant, and Dr Daryl Beach’s concept with an assistant. Methods. Goniometric and electromyographic recordings were made on 8 subjects, during a scaling operation. The electrical activity of their trapezius and lumbar muscles was compared, as were their cervical and lumbar ranges of motion. Results. The results showed that there was a wide variability depending on the workstation. However, the Beach concept tended to reduce physical strain on most parameters: duration of left lumbar muscle activity (2% compared to 15% of time spent in >10% maximal voluntary contraction, MVC), time spent in cervical side bending (4% compared to 30%), cervical flexion of >20° (9% compared to 40%), and left trapezius activity (9% of time spent >10% MVC compared to 28%). Conclusion. Practitioners and students should adjust their workstations to reduce the prevalence of MSDs.     

Near-surface ozone levels and trends at rural stations in France over the 1995–2003 period

There is a considerable interest in quantifying near-surface ozone concentrations and associated trends, as they serve to define the impacts on ozone of the anthropogenic precursors reductions and to evaluate the effects of emission control strategies. A statistical test has been used to the ozone air concentrations measured in the French rural monitoring network stations, called MERA, in order to bring out spatio-temporal trends in air quality in France over the 1995-2003 period. The non-parametric Mann-Kendall test has been developed for detecting and estimating monotonic trends in the time series and applied in our study at annual values: mean, 98th percentile and median based on hourly averaged ozone concentrations and applied to daily maxima. In France, when averaged overall 9 stations between 1995 and 2003, a slight increasing trend of the O(3) levels (+0.6 +/- 1.3% year( - 1)) is observed, which is strongly influenced by the concentrations of the high altitude stations. In stations below 1000 m a mean rate of -0.48% year( - 1) from annual average concentrations, of -0.45% year( - 1) for medians and of +0.56% year( - 1) for P.98 over the 1995-2003 period were obtained. In stations above 1,000 m a mean rate of +1.75% year( - 1) from annual averages values, of +4.05% year( - 1) for medians and of +2.55% year( - 1) for P.98 were calculated over the 1997-2003 period. This situation is comparable to the one observed in other countries. In Europe and in France a reduction of precursor emissions is observed whereas a slight increasing trend of the O(3) levels is observed over the 1995-2003 period. One reason is the non-linearity of chemical ozone production with respect to precursor emissions. Possible explanations are an increase in near-surface ozone values caused by a reduced ozone titration by reduced NO( x ), the meteorological parameters change, an increase in bio-geogenic compound concentrations, the intercontinental transport from North America and Asia and the influence of stratospheric-tropospheric exchanges. These possible explanations must be interpreted carefully as on the short time scales considered.     

Sensitivity analysis for models of greenhouse gas emissions at farm level. Case study of N(2)O emissions simulated by the CERES-EGC model

Modelling complex systems such as farms often requires quantification of a large number of input factors. Sensitivity analyses are useful to reduce the number of input factors that are required to be measured or estimated accurately. Three methods of sensitivity analysis (the Morris method, the rank regression and correlation method and the Extended Fourier Amplitude Sensitivity Test method) were compared in the case of the CERES-EGC model applied to crops of a dairy farm. The qualitative Morris method provided a screening of the input factors. The two other quantitative methods were used to investigate more thoroughly the effects of input factors on output variables. Despite differences in terms of concepts and assumptions, the three methods provided similar results. Among the 44 factors under study, N₂O emissions were mainly sensitive to the fraction of N₂O emitted during denitrification, the maximum rate of nitrification, the soil bulk density and the cropland area.     

NitroScape: a model to integrate nitrogen transfers and transformations in rural landscapes

Modelling nitrogen transfer and transformation at the landscape scale is relevant to estimate the mobility of the reactive forms of nitrogen (N_r) and the associated threats to the environment. Here we describe the development of a spatially and temporally explicit model to integrate N_r transfer and transformation at the landscape scale. The model couples four existing models, to simulate atmospheric, farm, agro-ecosystem and hydrological N_r fluxes and transformations within a landscape. Simulations were carried out on a theoretical landscape consisting of pig-crop farms interspersed with unmanaged ecosystems. Simulation results illustrated the effect of spatial interactions between landscape elements on N_r fluxes and losses to the environment. More than 10% of the total N₂O emissions were due to indirect emissions. The nitrogen budgets and transformations of the unmanaged ecosystems varied considerably, depending on their location within the landscape. The model represents a new tool for assessing the effect of changes in landscape structure on N_r fluxes.     

Detection of fullerenes (C60 and C70) in commercial cosmetics

Detection methods are necessary to quantify fullerenes in commercial applications to provide potential exposure levels for future risk assessments of fullerene technologies. The fullerene concentrations of five cosmetic products were evaluated using liquid chromatography with mass spectrometry to separate and specifically detect C₆₀ and C₇₀ from interfering cosmetic substances (e.g., castor oil). A cosmetic formulation was characterized with transmission electron microscopy, which confirmed that polyvinylpyrrolidone encapsulated C₆₀. Liquid-liquid extraction of fullerenes from control samples approached 100% while solid-phase and sonication in toluene extractions yielded recoveries of 27-42%. C₆₀ was detected in four commercial cosmetics ranging from 0.04 to 1.1 μg/g, and C₇₀ was qualitatively detected in two samples. A single-use quantity of cosmetic (0.5 g) may contain up to 0.6 μg of C₆₀, demonstrating a pathway for human exposure. Steady-state modeling of fullerene adsorption to biosolids is used to discuss potential environmental releases from wastewater treatment systems.     

Assessment of arsenic immobilization in synthetically prepared cemented paste backfill specimens

Mine tailings coming from the exploitation of sulphide and/or gold deposits can contain significant amounts of arsenic (As), highly soluble in conditions of weathering. Open mine voids backfilling techniques are now widely practiced by modern mining companies to manage the tailings. The most common one is called cemented paste backfill (CPB), and consists of tailings mixed with low amounts of hydraulic binders (3-5%) and a high proportion of water (typically 25%). The CPB is transported through a pipe network, to be placed in the mine openings. CPB provides storage benefits and underground support during mining operations. Moreover, this technique could also enhance contaminant stabilization, by fixing the contaminants in the binder matrix. CPB composites artificially spiked with As were synthesized in laboratory, using two types of hydraulic binders: a Portland cement, and a mix of fly ash and Portland cement. After curing duration of 66 days, the CPB samples were subjected to several leaching tests in various experimental conditions in order to better understand and then predict the As geochemical behaviour within CPBs. The assessment of the As release indicates that this element is better stabilized in Portland cement-based matrices rather than fly ash-based matrices. The As mobility differs in these two matrices, mainly because of the different As-bearing minerals formed during hydration processes. However, the total As depletion does not exceed 5% at the end of the most aggressive leaching test, indicating that As is well immobilized in the two types of CPB.     

Analysis of HO-PCBs and PCP in blood plasma from individuals with high PCB exposure living on the Chukotka Peninsula in the Russian Arctic

A trace analytical method is presented for the analysis of hydroxylated polychlorinated biphenyl metabolites (HO-PCBs) and pentachlorophenol (PCP) in human plasma. The described methodology is a modification of a previously validated method used for PCB and organochlorine pesticide analysis. The modified method enables the combined analysis of phenolic and neutral halogenated compounds. A tandem Florisil column is used for separating the HO-PCBs and PCP from the neutral fraction, instead of the more common chemical partitioning. In the same step the neutral fraction is purified for GC analysis. The extraction of the HO-PCBs and PCP was found to be highly dependent on sufficient acidification of the sample and the polarity of the extracting solvent. Analysis of plasma samples gave recovery rates for (13)C(6)-PCP and (13)C(12)-4-HO-CB 187 of 64 and 72%, respectively. The limit of detection ranged between 2-20 pg g(-1) plasma for the HO-PCBs and 5 pg g(-1) plasma for PCP. No matrix interferences were observed in the chromatograms. In plasma samples (n = 15) from the native Chukchi people in Uelen (Russian Arctic), a population with high PCB exposure, the median ratio of sum HO-PCBs to sum PCBs was as high as 0.4 and the sum HO-PCBs and PCBs were significantly correlated (r(2) > 0.7, p < 0.01). The median sum HO-PCBs (10 congeners) was 5920 pg g(-1) plasma with 4-HO-CB 107 as the dominating congener (median: 1670 pg g(-1) plasma). The median PCP level was measured at 642 pg g(-1) plasma.     

Assessment of the Application of an Ecotoxicological Procedure to Screen Illicit Toxic Discharges in Domestic Septic Tank Sludge

ABSTRACT

An innovative screening procedure has been developed to detect illicit toxic discharges in domestic septic tank sludge hauled to the Montreal Urban Community waste-water treatment plant. This new means of control is based on an integrative approach, using bioassays and chemical analyses. Conservative criteria are applied to detect abnormal toxicity with great reliability while avoiding false positive results. The complementary data obtained from toxicity tests and chemical analyses support the use of this efficient and easy-to-apply procedure.

This study assesses the control procedure in which 231 samples were analyzed over a 30-month period. Data clearly demonstrate the deterrent power of an efficient control procedure combined with a public awareness campaign among the carriers. In the first 15 months of application, between January 1996 and March 1997, approximately 30% of the 123 samples analyzed showed abnormal toxicity. Between April 1997 and June 1998, that is, after a public hearing presentation of this procedure, this proportion dropped significantly to approximately 9% based on 108 analyzed samples.

The results of a 30-month application of this new control procedure show the superior efficiency of the ecotoxicological approach compared with the previously used chemical control procedure. To be able to apply it effectively and, if necessary, to apply the appropriate coercive measures, ecotoxicological criteria should be included in regulatory guidelines.     

Ecotoxicity of xanthene dyes and a non-chlorinated bisphenol in soil

Soil eco-toxicity testing was conducted in support of Canada’s Chemical Management Plan (CMP) to fill data gaps for organic chemicals known to primarily partition to soil, and of which the persistence and inherent toxicity are uncertain. Two compounds representative of specific classes of chemicals: non-chlorinated bisphenols containing an –OH group (4,4′-methylenebis(2,6-di-tert-butylphenol (Binox)) and xanthene dyes (2′,4′,5′,7′-tetrabromo-4,5,6,7-tetrachloro-3′,6′-dihydroxy-, disodium salt (Phloxine B), 2′,4′,5’,7′-tetrabromofluorescein (TBF), 4′,5′-dibromofluorescein (DBF), and 4,5,6,7-tetrachlorofluorescein (TCF)) were evaluated. The effect of these substances on plant growth (Elymus lanceolatus and Trifolium pratense) and soil invertebrate survival and reproduction (Folsomia candida and Eisenia andrei) were assessed using a field-collected sandy soil. Binox was persistent throughout testing (up to 63 d) with an average recovery of 77 ± 2.9% at test end. Binox was not toxic to plants (IC50s > 1076 mg kg^?1) or E. andrei (IC50s > 2651 mg kg^?1); however, a significant reduction in F. candida adult survival and reproduction (IC50 = 89 (44–149) mg kg^?1) was evident. Phloxine B was also persistent throughout testing, with an average recovery of 82 ± 3.0% at test end. Phloxine B was significantly more toxic than Binox, with significant reductions in plant root growth (IC50s ? 11 mg kg^?1) and invertebrate reproduction (IC50s ? 22 mg kg^?1). DBF toxicity was not significantly different from that of Phloxine B for plant root growth (IC50s ? 30 mg kg^?1), but was significantly less toxic for shoot growth (IC50s ? 1758 mg kg^?1), and invertebrate adult survival (IC50s ? 2291 mg kg^?1) and reproduction (IC50s ? 451 mg kg^?1). A comparison between all four xanthene dyes was completed using F. candida, with the degree of toxicity in the order of Phloxine B ? TBF ～ DBF > TCF. The results from these studies will contribute to data gaps for poorly understood chemicals (and chemical groupings) under review for environmental risk assessments, and will aid in the validation of model predictions used to characterize the fate and effects of these substances in soil environments.