Patterns of metals and arsenic poisoning in Vibrio fischeri bacteria

The Microtox bioassay was used to establish dose-response curves for some toxic elements in aqueous solutions, namely, Zn(II), Pb(II), Cu(II), Hg(II), Ag(I), Co(II), Cd(II), Cr(VI), As(V) and As(III). Experiments were carried out at either pH 6.0 or pH 7.0 to indicate that pH may influence the measured toxicity of some elements due to pH-related changes of their chemical speciation. EC20 values, which represent a measurable threshold of toxicity, were determined for each element and were found to rank as Pb(II)>Ag(I)>Hg(II) approximately Cu(II)>Zn(II)>As(V)>Cd(II) approximately Co(II)>As(III)>Cr(VI). These values were compared to the limit concentrations allowed in industrial wastewater according to the official regulations in Catalonia (Spain). It appears that the Microtox test is sensitive enough for detecting some of the tested elements with respect to official regulations of Catalonia (Spain) dealing with pollution control, with the exception of cadmium, mercury, arsenate, arsenite and chromate.     

Advanced oxidation processes in azo dye wastewater treatment.

The chemical degradation of synthetic azo dyes color index (C.I.) Acid Orange 7, C.I. Direct Orange 39, and C.I. Mordant Yellow 10 has been studied by the following advanced oxidation processes: Fenton, Fenton-like, ozonation, peroxone without or with addition of solid particles, zeolites HY, and NH4ZSM5. Spectrophotometric (UV/visible light spectrum) and total organic carbon measurements were used for determination of process efficiency and reaction kinetics. The degradation rates are evaluated by determining their rate constants. The different hydroxyl radical generation processes were comparatively studied, and the most efficient experimental conditions for the degradation of organic azo dyes solutions were determined.     

In vitro toxicity of selected pesticides on RTG-2 and RTL-W1 fish cell lines

The rainbow trout fish cell lines RTG-2 and RTL-W1 were used to determine the cytotoxic effects of the pesticides bifenthrin, cypermethrin, cyhalothrin, lambda-cyhalothrin, quinalphos and chlorpyrifos. Cytotoxicity was measured by EROD and beta-Gal enzymatic activities, the neutral red (NR) uptake assay, and the FRAME KB protein (KBP) assay. The beta-Gal activity was unaffected by the pesticide exposure. The EROD activity was induced by cyhalothrin and lambda-cyhalothrin (RTG-2 and RTL-W1) and by bifenthrin (RTL-W1). Dose dependent inhibition responses were observed for EROD activity in cells exposed to quinalphos (RTL-W1) and chlorpyrifos (RTG-2 and RTL-W1). RTL-W1 offered a better response for EROD induction. The EC50 values on EROD endpoint were more sensitive than NR and KBP. The acute fish toxicity of chlorpyrifos and quinalphos depends highly on the species; the species sensitivity distributions cover several orders of magnitude and the values obtained for EROS were within the lowest part of the reported ranges.     

Hybrid process for heavy metal removal from wastewater sludge.

Bioleaching processes have been demonstrated to be effective technologies in removing heavy metals from wastewater sludge, but long hydraulic retention times are typically required to operate these bioprocesses. A hybrid process (coupling biological and chemical processes) has been explored in laboratory pilot-scale experiments for heavy metals (cadmium [Cd], copper [Cu], chromium [Cr], and zinc [Zn]) removal from three types of sludge (primary sludge, secondary activated sludge, and a mixture of primary and secondary sludge). The hybrid process consisted of producing a concentrate ferric ion solution followed by chemical treatment of sludges. Ferric iron solution was produced biologically via oxidation of ferrous iron by A. ferrooxidans in a continuous-flow stirred tank (5.2 L) reactor (CSTR). Wastewater sludge filtrate (WSF) containing nutrients (phosphorus and nitrogen) has been used as culture media to support the growth and activity of indigenous iron-oxidizing bacteria. Results showed that total organic carbon (TOC) concentrations of the culture media in excess of 235 mg/L were found to be inhibitory to bacterial growth. The oxidation rate increased as ferrous iron concentrations ranged from 10 to 40 g Fe2+/L. The percentage of ferrous iron (Fe2+) oxidized to ferric iron (Fe3+) increased as the hydraulic retention time (HRT) increased from 12 to 48 h. Successful and complete Fe2+ oxidation was recorded at a HRT of 48 h using 10 g Fe2+/L. Subsequently, ferric ion solution produced by A. ferrooxidans in sludge filtrate was used to solubilize heavy metals contained in wastewater sludge. The best solubilization was obtained with a mixture of primary and secondary sludge, demonstrating a removal efficiency of 63, 71, 49, and 80% for Cd, Cu, Cr, and Zn, respectively.     

Kinetics of benzene adsorption onto activated carbon

An activated carbon bed adsorption process is influenced by the adsorbents' characteristics, volatile organic compound (VOC) characteristics, and process conditions. In the literatures, the adsorption processes of the adsorbents and VOCs were usually considered to be in equilibrium. In this study, the VOC adsorption processes by activated carbon were considered to be a kinetic process, i.e. they are not in equilibrium. Then, isothermal adsorption curves and a small column experiment were simulated.     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.     

Wastes of multilayer containers as substrate in composting processes

An evaluation of the influence and degradation of ground multilayer containers, such as Tetra Brik Aseptic (TBA), in the composting process of municipal solid wastes (MSW) is presented. Two composting piles were formed by mixing, in different proportions, an organic fraction of MSW and TBA material ground as flakes or stripes. Piles were periodically aerated by mechanical mixing. Evolution of the composting was followed by frequent measurements of suitable parameters such as temperature, moisture, ashes, total organic carbon (TOC), nitrogen, C/N ratio, pH, conductivity, nutrients, and heavy metals. As expected, aluminum and polyethylene films from TBA were not degraded during the processes, but the cardboard fraction of TBA showed a partial decomposition that was more intense in the material ground as flakes. After two months of curing, the composts were refined and analyzed to determine their nutrient and heavy-metals contents. Despite their poor aesthetic properties, mainly resulting from the presence of little pieces of plastic and aluminum films, the composts contained the required amounts of nutrients; furthermore, their heavy-metals content was below the limits proposed by some official European organizations.     

PCDDs, PCDFs, PCBs and HCB in marine and estuarine sediments from Queensland, Australia.

Concentrations of 2,3,7,8-chlorine substituted PCDDs, PCDFs, selected PCB congeners and HCB were determined in sediment samples collected from sites along the east coast of Queensland in northern Australia. PCDDs were detectable in all sediment samples while PCDFs, PCBs and HCB were mainly found in sediment samples collected from sites in the Brisbane metropolitan area. The results provide evidence that an unidentified source for higher chlorinated PCDDs exists along the Queensland coast.     

Gestaltungsoptionen für handlungsf?hige Innovationssysteme zur erfolgreichen Substitution gef?hrlicher Stoffe (SubChem)

Ohne Zusammenfassung Online First: 27. 03. 2002 ‚Sustainable Substitution of Hazardous Substances‚; Projektbeschreibung unter wwwoekopolde oder wwwfh-hamburgdelpers/gleich_von bzw. www.uni-hamburgde/kooperationssteI1e-hh. Das Vorhaben wird vom Bundesministerium für Bildung und Forschung (BMBF) im F?rderschwerpunkt ‚Rahmenbedingungen für Innovationen zum nachhaitigen Wirtschaften’ (RIW) gef?rdert und von der GSF als Projekttr?ger betreut (FkZ. O7Riw4).