Automated evaluation of the effect of ionic liquids on catalase activity

An automated assay for the evaluation of the influence of ionic liquids on the activity of catalase was developed. The activity and inhibition assays were implemented in a sequential injection analysis (SIA) system and intended to contribute for the estimation of the toxicity of the tested compounds. The fast developed methodology was based on the oxidation of the non-fluorescent probe amplex red, in the presence of H₂O₂, to produce resorufin, a strong fluorescent compound. Catalase activity was monitored by the decreased of the fluorescence intensity due to the consumption of H₂O₂ by the enzyme. The activity assays were performed in strictly aqueous media and in the presence of increasing concentrations of seven commercially available ionic liquids and sodium azide, a strong inhibitor of catalase. IC₅₀ values between 0.15 and 2.77 M were obtained for the tested compounds, revealing distinct inhibitory effects. This allowed us to perform some considerations about the toxicity of the tested cations and anions. The developed SIA methodology showed to be robust and exhibited good repeatability in all the assay conditions. On the other hand, it proved to be in good agreement with the actual concerns of “Green Chemistry” since it involved the consumption of less than 200 μL of reagents and the production of only 1.7 mL of effluent (per cycle) and at the same time reduced the operator exposure resulting in increased environmental and human safety.     

A safety culture maturity model for petrochemical companies in Brazil

A framework to measure safety culture maturity in the Brazilian oil and gas companies was formulated based on the model of Hudson (2001). Following a review of the safety culture literature, a questionnaire was designed to measure five aspects of organisational safety indicative of five levels of cultural maturity. The questionnaire was completed by the safety managers of 23 petrochemical companies based in Camacari, Bahia, Brazil and they were interviewed one month later. The reliability of the questionnaire was tested by asking the same questions in an interview and comparing the results (alternate forms reliability). The correlation coefficients between the questionnaire and interview scores on each dimension ranged from r = 0.7 to 0.9, demonstrating good reliability of the measures used. The research findings demonstrated that the 23 companies studied showed characteristics of different levels of safety culture maturity. Most scores were at the level of proactive. The model of Hudson (2001) and the revised framework and questionnaire were found to be practical to use, making it possible to identify levels of safety culture maturity in the context of the Brazilian petrochemical industry.     

Adsorption Kinetics of Dyes in Single and Binary Systems Using Cyanoguanidine-Crosslinked Chitosan of Different Deacetylation Degrees

The crosslinking of chitosan with cyanoguanidine shows some advantages, such as the improved the stability in acid solutions and the decrease of adsorbent cost. In this work, cyanoguanidine-crosslinked chitosan and pure chitosan were prepared to apply in the adsorption of Food Yellow 4 (FY4) and Food Blue 2 (FB2), in single and binary systems. Effects of pH and deacetylation degree (DD) of chitosan in adsorption were evaluated. The adsorbents were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The kinetic data were analyzed by pseudo-first order, pseudo-second order and Avrami models. The conditions of pH 3 and DD 95% were the more suitable to reach the highest adsorption capacities in all experimental assays. Under these conditions, the adsorption capacities for FY4 were approximately of 392 and 200 mg g^?1 and, for FB2 were approximately of 370 and 184 mg g^?1, respectively, in the single and binary systems. The Avrami model was suitable to represent the kinetic curves in all conditions, and the highest adsorption capacities were found for FY4 in binary aqueous system, being for the pure chitosan of 229 mg g^?1 and crosslinked chitosan of 218 mg g^?1. The Langmuir and extended Langmuir models presented a good fit to the equilibrium data in both systems. It was found that, the chitosan crosslinked with cyanoguanidine improved the chemical stability of chitosan as adsorbent.     

Eumelanin-based coloration and fitness parameters in birds: a meta-analysis

Although melanin is the most common pigment in animal integuments, the adaptive function of variation in melanin-based coloration remains poorly understood. The individual fitness returns associated with melanin pigments can be variable across species as these pigments can have physical and biological protective properties and genes involved in melanogenesis may vary in the intensity of pleiotropic effects. Moreover, dark and pale coloration can also enhance camouflage in alternative habitats and melanin-based coloration can be involved in social interactions. We investigated whether darker or paler individuals achieve a higher fitness in birds, a taxon wherein associations between melanin-based coloration and fitness parameters have been studied in a large number of species. A meta-analysis showed that the degree of melanin-based coloration was not significantly associated with laying date, clutch size, brood size, and survival across 26 species. Similar results were found when restricting the analyses to non-sexually dimorphic birds, colour polymorphic and monomorphic species, in passerines and non-passerines and in species for which inter-individual variation in melanism is due to colour intensity. However, eumelanic coloration was positively associated with clutch and brood size in sexually dimorphic species and those that vary in the size of black patches, respectively. Given that greater extent of melanin-based coloration was positively associated with reproductive parameters and survival in some species but negatively in other species, we conclude that in birds the sign and magnitude of selection exerted on melanin-based coloration is species- or trait-specific.     

Does fungicide application in vineyards induce resistance to medical azoles in Aspergillus species?

This study assessed if the use of sterol demethylase inhibitor fungicides in vineyard production can induce resistance to azoles in Aspergillus strains and if it can induce selection of resistant species. We also tried to identify the Aspergillus species most prevalent in the vineyards. Two vineyards from northern Portugal were selected from “Vinhos Verdes” and “Douro” regions. The vineyards were divided into plots that were treated or not with penconazole (PEN). In each vineyard, air, soil, and plant samples were collected at three different times. The strains of Aspergillus spp. were isolated and identified by morphological and molecular techniques. We identified 46 Aspergillus section Nigri, eight Aspergillus fumigatus, seven Aspergillus lentulus, four Aspergillus wentii, two Aspergillus flavus, two Aspergillus terreus, one Aspergillus calidoustus, one Aspergillus westerdijkiae, one Aspergillus tamarii, and one Eurotium amstelodami. Aspergillus strains were evaluated for their susceptibility to medical azoles used in human therapy (itraconazole, posaconazole, and voriconazole) and to agricultural azoles (PEN) used in the prevention and treatment of plant diseases. The isolates showed moderate susceptibility to voriconazole. We did not observe any decrease of susceptibility to the medical azoles tested throughout the testing period in any of the treated plots, although some of the resistant species were isolated from there.     

Mercury concentration in fish from Piracicaba River (Minas Gerais, Brazil)

Mercury emissions from some upstream gold mining areas and recent findings of high natural Hg levels in sediments motivated studies on the Hg cycle in the Minas Gerais state. The study presents the total mercury amount found in Geophagus brasiliensis' muscular tissue (wet weight) and sediments from Piracicaba River. Mercury was analyzed using acid digestion followed by determination of total mercury by cold vapour atomic absorption spectrophotometry. This study was also complemented with the analysis of the limnological parameters (water temperature, conductivity, total dissolved solids, suspended particles, pH, dissolved oxygen, maximum depth, photic index and total carbon). The mercury concentration in sediments samples was higher than the mercury concentration in muscular tissue of fish. The lowest Hg level measured in fish was 0.0147 microg g( - 1), while the highest was 0.101 microg g( - 1). In the sediment samples, the lowest and highest levels were 0.02 microg g( - 1) and 0.16 microg g( - 1), respectively. The Hg concentrations in fish and sediment were both under the maximum limit permitted by the World Health Organization.     

Toxicity of char residues produced in the co-pyrolysis of different wastes

Char residues produced in the co-pyrolysis of different wastes (plastics, pine biomass and used tyres) were characterized using chemical and toxicity assays. One part of the solid chars was submitted to extraction with dichloromethane (DCM) in order to reduce the toxicity of the char residues by removing organic contaminants. The different volatility fractions present in the extracted char (Char A) and in the raw char (Char B) were determined by progressive weight loss combustion. A selected group of heavy metals (Cd, Pb, Zn, Cu, Hg and As) was determined in both chars.The chars were subjected to the leaching test ISO/TS 21268 – 2, 2007 and the resulting eluates were further characterized by determining a group of inorganic parameters (pH, conductivity, Cd, Pb, Zn, Cu, Hg and As contents) and the concentrations of several organic contaminants (volatile aromatic hydrocarbons and alkyl phenols). An ecotoxicological characterization was also performed by using the bio-indicator Vibrio fischeri.The chemical and ecotoxicological results were analyzed according to the Council Decision 2003/33/CE and the criteria on the evaluation methods of waste ecotoxicity (CEMWE).The results obtained in this work indicated that the extraction with DCM is an effective method for the removal of organic contaminants of high to medium volatility from pyrolysis solid residues, thus decreasing their toxicity potential. Zn can be leached from the chars even after the DCM extraction treatment and can contribute to the ecotoxicity of the eluates obtained from chars.Both chars (treated and non treated with DCM) were classified as hazardous and ecotoxic wastes.     

Biodegradable chelating agents for industrial,domestic, and agricultural applications—a review

Aminopolycarboxylates, like ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA), are chelating agents widely used in several industrial, agricultural, and domestic applications. However, the fact that they are not biodegradable leads to the presence of considerable amounts in aquatic systems, with serious environmental consequences. The replacement of these compounds by biodegradable alternatives has been the object of study in the last three decades. This paper reviews the most relevant studies towards the use of environmentally friendly chelating agents in a large number of applications: oxidative bleaching, detergents and cleaning compositions, scale prevention and reduction, remediation of soils, agriculture, electroplating, waste treatment, and biocides. Nitrilotriacetic acid (NTA), ethylenediaminedisuccinic acid (EDDS), and iminodisuccinic acid (IDS) are the most commonly suggested to replace the nonbiodegradable chelating agents. Depending on the application, the requirements for metal complexation might differ. Metal chelation ability of the most promising compounds [NTA, EDDS, IDS, methylglycinediacetic acid (MGDA), l-glutamic acid N,N-diacetic acid (GLDA), ethylenediamine-N,N′-diglutaric acid (EDDG), ethylenediamine-N,N′-dimalonic acid (EDDM), 3-hydroxy-2,2-iminodisuccinic acid (HIDS), 2-hydroxyethyliminodiacetic acid (HEIDA), pyridine-2,6-dicarboxylic acid (PDA)] with Fe, Mn, Cu, Pb, Cd, Zn, Ca, and Mg was simulated by computer calculations. The advantages or disadvantages of each compound for the most important applications were discussed.     

Assessment of metolachlor and diuron leaching in a tropical soil using undisturbed soil columns under laboratory conditions

In the present study, diuron [3-(3,4-dichlorophenyl)-1,1-dimethylurea] and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-metoxi-1-methylethyl)acetamide] leaching was studied in undisturbed soil columns collected in a cotton crop area in Mato Grosso State, Brazil. The pesticides were applied to the soil surface in dosages similar to those used in a cotton plantation. To assess the leaching process, soil columns were submitted to simulated rain under laboratory conditions at 25 ± 3°C, in the absence of wind and direct solar radiation. During the rain simulations, leachate solutions were collected and herbicide concentrations were determined. At the end of the experiment, the soil columns were cut into 10 cm sections to determine the remaining herbicide concentrations through the soil profile. Metolachlor was detected in all soil sections, and approximately 4% of the applied mass was leached. Diuron was detected only in the upper two soil sections and was not detected in the leachate. A linear correlation (r > 0.94) between the metolachlor soil concentrations and the organic contents of the soil sections was observed. Mass balance suggests that around 56% of diuron and 40% of metolachlor were degraded during the experiments. Measurements of the water table depth in the area where the samples were collected showed that it varied from 2 to 6 m and is therefore vulnerable to contamination by the studied herbicides, particularly metolachlor, which demonstrated a higher leaching potential.     

Noise mapping of densely populated neighborhoods—example of Copacabana, Rio de Janeiro—Brazil

Copacabana is one of the most famous neighborhoods of the city of Rio de Janeiro/Brazil but suffers from a high inhabitant density. One of the many environmental problems faced is related to noise pollution. In order to assess not only the noise levels, to which the population is exposed, but also to quantify the influence of architectural aspects, the paper presents the steps taken towards a simulation of the noise emission and propagation in this area. The results of the simulation are compared to measurements in different locations and daily-hours. The discrepancies are analyzed and the methodology is discussed in view of its application to a huge urban center like the city of Rio de Janeiro.