Fume emissions during gas metal arc welding

The control of exposure to welding fumes is of increasing importance in promoting a healthy, safe and productive work environment. This article describes the effects of shielding gas composition on the amount and composition of welding fumes produced during gas metal arc welding (GMAW). The amount of fumes generated during welding was measured for steady current over a range of wire-feed speeds and arc voltages using the standard procedures contained in ANSI/AWS F1.2 [American Welding Society. ANSI/AWS F1.2. Laboratory method for measuring fume generation rates and total fume emission of welding and allied processes. Miami, Florida; 1992]. Results of these measurements show that the fume formation rates (FFRs) increase with CO₂ and O₂ in the shielding gas mixture. The lowest FFRs were obtained with the mixtures of Ar?+?2%CO₂ and Ar?+?3%CO₂?+?1%O₂. The highest FFRs were obtained with the mixtures of Ar?+?18%CO₂ and Ar?+?5%CO₂?+?4%O₂. The welding fumes contains mainly iron, manganese, silicon, titanium and sodium under oxide forms. The fume cluster particles have dimensions between 0.5 and 2?µm. The FFR was found to be governed by the transfer modes of molten metal, i.e. the current intensity and arc voltage, as well as by the shielding gas mixtures composition. Thus these parameters have to be taken into consideration before designing a welding process. Whenever possible, users of GMAW should use the lowest current intensity. However, when this is not possible, due to the constraints of process productivity, welders should use higher currents, but with Ar?+?2%CO₂ and Ar?+?3%CO₂?+?1%O₂ shielding mixtures, which will lead to smaller fume emissions.     

Preliminary toxicological assessment of phthalate esters from drinking water consumed in Portugal

This paper reports, for the first time, the concentrations of selected phthalates in drinking water consumed in Portugal. The use of bottled water in Portugal has increased in recent years. The main material for bottles is polyethylene terephthalate (PET). Its plasticizer components can contaminate water by leaching, and several scientific studies have evidenced potential health risks of phthalates to humans of all ages. With water being one of the most essential elements to human health and because it is consumed by ingestion, the evaluation of drinking water quality, with respect to phthalate contents, is important. This study tested seven commercial brands of bottled water consumed in Portugal, six PET and one glass (the most consumed) bottled water. Furthermore, tap water from Lisbon and three small neighbor cities was analyzed. Phthalates (di-n-butyl phthalate ester (DnBP), bis(2-ethylhexyl) phthalate ester (DEHP), and di-i-butyl phthalate ester (DIBP)) in water samples were quantified (PET and glass) by means of direct immersion solid-phase microextraction and ionic liquid gas chromatography associated with flame ionization detection or mass spectrometry due to their high boiling points and water solubility. The method utilized in this study showed a linear range for target phthalates between 0.02 and 6.5 μg L^?1, good precision and low limits of detection that were between 0.01 and 0.06 μg L^?1, and quantitation between 0.04 and 0.19 μg L^?1. Only three phthalates were detected in Portuguese drinking waters: dibutyl (DnBP), diisobutyl (DIBP), and di(ethylhexyl) phthalate (DEHP). Concentrations ranged between 0.06 and 6.5 μg L^?1 for DnBP, between 0.02 and 0.16 μg L^?1 for DEHP, and between 0.1 and 1.89 μg L^?1 for DIBP. The concentration of DEHP was found to be up to five times higher in PET than in glass bottled water. Surprisingly, all the three phthalates were detected in glass bottled water with the amount of DnBP being higher (6.5 μg L^?1) than in PET bottled water. These concentrations do not represent direct risk to human health. Regarding potable tap water, only DIBP and DEHP were detected. Two of the cities showed concentration of all three phthalates in their water below the limits of detection of the method. All the samples showed phthalate concentrations below 6 μg L^?1, the maximum admissible concentration in water established by the US Environmental Protection Agency. The concentrations measured in Portuguese bottled waters do not represent any risk for adult's health.     

Behavioral and life-history evidence for interspecific competition in the larvae of two heliconian butterflies

Interspecific competition in herbivorous insects remains a controversial issue. To date, many studied systems have not met assumptions of the traditional competition theory, and a new paradigm has been emerging. We examined the behavioral and life-history consequences of common host plant use of Heliconius erato and Dryas iulia (Nymphalidae) in relation to Passiflora suberosa (Passifloraceae). Larvae of the former use the apical portion of this host; the latter is presumably able to explore all plant parts. We assessed host use pattern in relation to leaf age, when reared either alone (D. iulia) or together (D. iulia and H. erato). Larval feeding choice tests with respect to leaf age were performed, and performance was recorded. Observations were made to assess antagonistic behavior of H. erato and D. iulia towards each other, if any. Similarly to H. erato, D. iulia fed on the young leaves significantly more than the mature ones; larvae were not induced to prefer mature leaves. First instars of H. erato used only the apical parts of P. suberosa and displayed aggressive behavior towards D. iulia, which moved to the lower shoot portions. Larval mortality and development time of both species significantly increased when reared together; such performance costs were more pronounced in D. iulia than H. erato. Our study gathers evidences that use of P. suberosa by these heliconian butterflies represent a case of competitive exclusion resulting in niche differentiation, where costs are higher for D. iulia than H. erato.     

Development of metal organic framework-199 immobilized zeolite foam for adsorption of common indoor VOCs

Reticulated foam shaped adsorbents are more efficient for the removal of volatile organic compounds (VOCs), particularly from low VOC-concentration indoor air streams. In this study composite structure of zeolite and metal organic frameworks (MOFs), referred as ZMF, has been fabricated by immobilization of fine MOF-199 powder on foam shaped Zeolite Socony Mobil-5 (ZSM-5) Zeolitic structure, referred as ZF. The ZMF possess a uniform and well-dispersed coating of MOF-199 on the porous framework of ZF. It shows higher surface area, pore volume, and VOCs adsorption capacity, as compared to ZF-structure. Post-fabrication changes in selective adsorption properties of ZMF were studied with three common indoor VOCs (benzene, n-hexane, and cyclohexane), using gravimetric adsorption technique. The adsorption capacity of ZMF with different VOCs follow the order of benzene > n-hexane > cyclohexane. In comparison with MOF-199 and ZF, the composite structure ZMF shows improvement in selectivity for benzene from other two VOCs. Further, improvement in efficiency and stability of prepared ZMF was found to be associated with its high MOF loading capacity and unique morphological and structural properties. The developed composite structure with improved VOCs removal and recyclability could be a promising material for small to limited scale air pollution treatment units.     

Identification of redundant air quality measurements through the use of principal component analysis

This study aims to show how principal component analysis (PCA) can be used to identify redundant measurements in air quality monitoring networks. The minimum number of air quality monitoring sites in Oporto Metropolitan Area (Oporto-MA) was evaluated using PCA and then compared to the one settled by the legislation. Nine sites, monitoring NO₂, O₃ and PM₁₀, were selected and the air pollutant concentrations were analysed from January 2003 to December 2005. PCA was applied to the data corresponding to the first two years that were divided into annual quarters to verify the persistence of the PCA results. The number of principal components (PCs) was selected by applying two criteria: Kaiser (PCs with eigenvalues greater than 1) and ODV₉₀ (PCs representing at least 90% of the original data variance). Each pollutant was analysed separately. The two criteria led to different results. Using Kaiser criterion for the eight analysed periods, two PCs were selected in: (i) five periods for O₃ and PM₁₀; and (ii) six periods for NO₂. These PCs had important contributions of the same groups of monitoring sites. The percentage of the original data variance contained in the selected PCs using this criterion was always below 90%. Thus, the results obtained using ODV₉₀ were considered with more confidence. Using this criterion, only five monitoring sites for NO₂, three for O₃ and seven for PM₁₀ were needed to characterize the region. The number of monitoring sites for NO₂ and O₃ was in agreement with what was established by the legislation. However, for PM₁₀, Oporto-MA needed two more monitoring sites. To validate PCA results, statistical models were determined to estimate air pollutant concentrations at removed monitoring sites using the concentrations measured at the remaining monitoring sites. These models were applied to a year's data. The good performance obtained by the models showed that the monitoring sites selected by the procedure presented in this study were enough to infer the air pollutant concentrations in the region defined by the initial monitoring sites. Additionally, the air pollutant analysers corresponding to the redundant measurements can be installed in non-monitored regions, allowing the enlargement of the air quality monitoring network.     

Influence of particle size on the physico-mechanical and energy properties of briquettes produced with coffee husks

Environmental Science and Pollution Research - Briquetting is a technology with the potential to convert agricultural wastes into solid biofuels with improved handling, transport, storage, and...     

The effectiveness of climate action and land recovery across ecosystems,climatic zones and scales

Regional Environmental Change - Avalanche risk changes through time due to climate, landscape and socio-environmental transformations. These drivers exhibit space-time variations as function of...     

Prenatal foetal diagnosis of partial trisomy 3q and monosomy 13p due to a maternal balanced rearrangement

The authors describe a case of a male foetus whose ultrasound at 20 weeks' gestation revealed cystic hygroma, cleft lip and ventricular septal defect. Amniotic fluid cytogenetics using GTG banding showed a 46,XY,der(13)t(3;13)(q12;p11.1) rearrangement, and fluorescence in situ hybridization (FISH) delineated the relevant breakpoints. Familial studies identified a maternal balanced translocation involving chromosomes 3 and 13. The post-mortem examination confirmed the prenatal ultrasound findings. Copyright © 2005 John Wiley & Sons, Ltd.