Predicting soil water content at − 33 kPa by pedotransfer functions in stoniness 1 soils in northeast Venezuela

Soil water content is a key property in the study of water available for plants, infiltration, drainage, hydraulic conductivity, irrigation, plant water stress and solute movement. However, its measurement consumes time and, in the case of stony soils, the presence of stones difficult to determinate the water content. An alternative is the use of pedotransfer functions (PTFs), as models to predict these properties from readily available data. The present work shows a comparison of different widely used PTFs to estimate water content at-33 kPa (WR_-33kPa) in high stoniness soils. The work was carried out in the Caramacate River, an area of high interest because the frequent landslides worsen the quality of drinking water. The performance of all evaluated PTFs was compared with a PTF generated for the study area. Results showed that the Urach’s PTF presented the best performance in relation to the others and could be used to estimate WR_-33kPa in soils of Caramacate River basin. The calculated PTFs had a R² of 0.65. This was slightly higher than the R² of the Urach’s PTF. The inclusion of the rock fragment volume could have the better results. The weak performance of the other PTFs could be related to the fact that the mountain soils of the basin are rich in 2:1 clay and high stoniness, which were not used as independent variables for PTFs to estimate the WR_-33kPa.     

Cultivable microbiome and its resistance to antimicrobials isolated from <Emphasis Type="Italic">Zaprionus indianus</Emphasis>

The objective of this study was to identify Z. indianus in PEJC and PESCAN. Listed are the following methods: to isolate bacteria from the integument of the Z. indianus species collected and to check the resistance of microorganisms to antibiotics. Collections of Z. indianus were performed in four seasons of the two parks. The results obtained suggest that the low amount of Z. indianus collected can be justified by environmental factors such as high average temperature and low average humidity. It is noted that there is a predominance of bacteria of the Enterobacteriaceae family found in both the PEJC and the PESCAN. The antibiogram performed for the isolated PEJC bacteria shows statistical significance when comparing the edge and inside values of the park. Studies with fungi were also carried out, and it was evidenced that Trichophyton spp. was the genus that most inhabited the two environments studied. The ability of fluconazole and ketoconazole to inhibit fungal growth was also investigated, and considering the concentration tested may suggest that they have good action spectra. Plasmid profile data show that 60% of antibiotic-resistant bacteria have plasmids. The values found show that Z. indianus can act as vectors of microorganisms that affect the healthy animals and humans and that these organisms may be influenced by seasons.     

Wastewater treatment to enhance the economic viability of microalgae culture

Microalgae culture is still not economically viable and it presents some negative environmental impacts, concerning water, nutrient and energy requirements. In this context, this study aims to review the recent advances on microalgal cultures in wastewaters to enhance their economic viability. We focused on three different culture concepts: (1) suspended cell systems, (2) cell immobilization, and (3) microalgae consortia. Cultures with suspended cells are the most studied. The nutrient removal efficiencies are usually high for wastewaters of different sources. However, biomass harvesting is difficult and a costly process due to the small cell size and lower culture density. On the other hand, the cell immobilization systems showed to be the solution for this problem, having as main limitation the nutrient diffusion from bulk to cells, which results in a reduced nutrient removal efficiency. The consortium between microalgae and bacteria enhances the growth of both microorganisms. This culture concept showed to be a promising technology to improve wastewater treatment, regarding not only nutrient removal but also biomass harvesting by bioflocculation. The aggregation mechanism must be studied in depth to find the process parameters that would lead to an effective and cheap harvesting process.     

The influence of a real job on upper limb performance in motor skill tests: which abilities are transferred?

To investigate whether the specificities of real jobs create distinctions in the performance of workers in different motor tests for the upper limbs, 24 participants were divided into two groups according to their specific job: fine and repetitive tasks and general tasks. Both groups reproduced tasks related to aiming movements, handling and strength of the upper limbs. There were no significant differences between groups in the dexterity and performance of aiming movements. However, the general tasks group had higher grip strength than the repetitive tasks group, demonstrating differences according to job specificity. The results suggest that a particular motor skill in a specific job cannot improve performance in other tasks with the same motor requirements. The transfer of the fine and gross motor skills from previous experience in a job-specific task is the basis for allocating training and guidance to workers.     

Modelling of coastal vulnerability in the stretch between the beaches of Porto de Mós and Falésia, Algarve (Portugal)

Coastal systems are characterized by high geophysical and biophysical sensitivity as being their massive occupation a serious issue concerning their self-regulation. Worldwide coastal areas are exposed to problems such as coastal erosion, degradation and destruction of marine habitats, pollution and rising sea level. Thus, it is crucial to design models of coastal vulnerability assessment to ensure a better management of coastal areas. This study characterizes the vulnerability of the coastal stretch between the beaches of Porto de Mós and Falésia in the Algarve, corresponding to 52?km of the south coast of Portugal. The expansion of urban areas was modelled using a Cellular Automata (CA) based approach. Results show that 65% of the coastal stretch has high and very high vulnerability caused by both physical and human factors. Results further indicate that urban growth may interfere with the natural evolution of the coastal geomorphology. The scenario of urban expansion for the year 2015 highlights the need to develop effective urban planning processes to ensure a correct balance between the geophysical resilience of coastal systems and the promotion of the coastal sector as a strategic asset for the regional and national economy.     

Production of zeolitic materials in pilot scale based on coal ash for phosphate and potassium adsorption in order to obtain fertilizer

Environmental Science and Pollution Research - The use of different types of zeolites (X, Na-P1, and 4A) synthesized by different methods and scales were tested in this work to adsorb nutrients...     

Efficient adsorption of carbon dioxide and methane on activated carbon prepared from glycerol with potassium acetate

In the context of global warming and the energy crisis, emissions to the atmosphere of greenhouse gases such as carbon dioxide (CO₂) and methane (CH₄) should be reduced, and biomethane from landfill biogas should be recycled. For this, there is a need for affordable technologies to capture carbon dioxide, such as adsorption of biogas on activated carbon produced from industrial wastes. Here we converted glycerol, a largely available by-product from biodiesel production, into activated carbon with the first use of potassium acetate as an activating agent. We studied adsorption of CO₂ and CH₄ on activated carbon. The results show that activated carbon adsorb CO₂ up to 20% activated carbon weight at 250 kPa, and 9% at atmospheric pressure. This is explained by high specific surface areas up to 1115 m²g⁻¹. Moreover, selectivity values up to 10.6 are observed for the separation of CO₂/CH₄. We also found that the equivalent CO₂ emissions from activated carbon synthesis are easily neutralized by their use, even in a small biogas production unit.

     

Impacts of environmental issues on health and well-being: a global pollution challenge

Environmental Science and Pollution Research - Every 2&nbsp;years, the environmental, chemical, and health research communities meet in Costa de Caparica, Portugal to showcase the latest...     

Estimating trace gas and aerosol emissions over South America: Relationship between fire radiative energy released and aerosol optical depth observations

Contemporary human activities such as tropical deforestation, land clearing for agriculture, pest control and grassland management lead to biomass burning, which in turn leads to land-cover changes. However, biomass burning emissions are not correctly measured and the methods to assess these emissions form a part of current research area. The traditional methods for estimating aerosols and trace gases released into the atmosphere generally use emission factors associated with fuel loading and moisture characteristics and other parameters that are hard to estimate in near real-time applications. In this paper, fire radiative power (FRP) products were extracted from Moderate Resolution Imaging Spectroradiometer (MODIS) and from the Geostationary Operational Environmental Satellites (GOES) fire products and new South America generic biomes FRE-based smoke aerosol emission coefficients were derived and applied in 2002 South America fire season. The inventory estimated by MODIS and GOES FRP measurements were included in Coupled Aerosol-Tracer Transport model coupled to the Brazilian developments on the Regional Atmospheric Modeling System (CATT-BRAMS) and evaluated with ground truth collected in Large Scale Biosphere–Atmosphere Smoke, Aerosols, Clouds, rainfall, and Climate (SMOCC) and Radiation, Cloud, and Climate Interactions (RaCCI). Although the linear regression showed that GOES FRP overestimates MODIS FRP observations, the use of a common external parameter such as MODIS aerosol optical depth product could minimize the difference between sensors. The relationship between the PM_2.5μm (Particulate Matter with diameter less than 2.5 μm) and CO (Carbon Monoxide) model shows a good agreement with SMOCC/RaCCI data in the general pattern of temporal evolution. The results showed high correlations, with values between 0.80 and 0.95 (significant at 0.5 level by student t test), for the CATT-BRAMS simulations with PM_2.5μm and CO.