Anaerobic biodegradation of cellulosic material: Batch experiments and modelling based on isotopic data and focusing on aceticlastic and non-aceticlastic methanogenesis

Utilizing stable carbon isotope data to account for aceticlastic and non-aceticlastic pathways of methane generation, a model was created to describe laboratory batch anaerobic decomposition of cellulosic materials (office paper and cardboard). The total organic and inorganic carbon concentrations, methane production volume, and methane and CO₂ partial pressure values were used for the model calibration and validation. According to the fluorescent in situ hybridization observations, three groups of methanogens including strictly hydrogenotrophic methanogens, strictly aceticlastic methanogens (Methanosaeta sp.) and Methanosarcina sp., consuming both acetate and H₂/H₂CO₃ as well as acetate-oxidizing syntrophs, were considered. It was shown that temporary inhibition of aceticlastic methanogens by non-ionized volatile fatty acids or acidic pH was responsible for two-step methane production from office paper at 35 °C where during the first and second steps methane was generated mostly from H₂/H₂CO₃ and acetate, respectively. Water saturated and unsaturated cases were tested. According to the model, at the intermediate moisture (150%), much lower methane production occurred because of full-time inhibition of aceticlastic methanogens. At the lowest moisture, methane production was very low because most likely hydrolysis was seriously inhibited. Simulations showed that during cardboard and office paper biodegradation at 55 °C, non-aceticlastic syntrophic oxidation by acetate-oxidizing syntrophs and hydrogenotrophic methanogens were the dominant methanogenic pathways.     

Assessing ecological risk on a regional scale

Society needs a quantitative and systematic way to estimate and compare the impacts of environmental problems that affect large geographic areas. This paper presents an approach for regional risk assessment that combines regional assessment methods and landscape ecology theory with an existing framework for ecological risk assessment. Risk assessment evaluates the effects of an environmental change on a valued natural resource and interprets the significance of those effects in light of the uncertainties identified in each component of the assessment process. Unique and important issues for regional risk assessment are emphasized; these include the definition of the disturbance scenario, the assessment boundary definition, and the spatial heterogeneity of the landscape. Although the research described in this article has been funded wholly or in part by the United States Environmental Protection Agency (EPA) through Interagency Agreement Number DW89932112-01-2 to the U.S. Department of Energy, it has not been subjected to EPA review and therefore does not necessarily reflect the views of EPA and no official endorsement should be inferred.     

Biogeochemical cycling constraints on stream ecosystem recovery

In systems where production is limited by the availability of a nutrient, nutrient input to and recycling within the system is related to the resilience, or speed of recovery, of a system to its steady state following a disturbance. In particular, it is shown that the return timeT _s of the system to steady state, or the inverse of the resilience, is approximately equal to the mean turnover time of the limiting nutrient in the system. From this relationship, it is possible to understand and predict how various properties of food webs and their environments affect resilience. These properties include nutrient input rate, loss rate, size of the detritus compartment, and trophic structure. The effects of these properties on resilience are described by using simple mathematical models. To test model predictions, experimental studies of the response of periphyton-dominated stream ecosystems to disturbance are being conducted on a set of laboratory streams in which nutrient inputs and grazing intensity are regulated at different levels. In streams without snail grazers (low-grazed streams), 90% recirculation of stream water to reduce nutrient inputs resulted in longer turnover times (T _r ) of phosphorus within the stream compared with once-through flow. However, in streams with snail grazers (high-grazed streams), there were no differences in phosphorus turnover time between once-through and partially recirculated treatments. Results on the rate of recovery of periphyton from a flood/scour disturbance to each stream partially support the model prediction of a positive relationship between ecosystem return time (T _s ) and nutrient turnover time (T _r ) within the streams.     

APPLICATION OF A SEDIMENT ROUTING MODEL TO A MIDDLE EUROPEAN WATERSHED1

ABSTRACT: A simulation model that computes sediment yield due to sheet and rill erosion at the outlet of a large watershed requires daily precipitation and the soil, topographic, and vegetative characteristics of the watershed. An important problem, particularly in a large watershed, is the transport of sediment produced in the sub-watersheds to the outlet of the whole watershed. This problem is approached mathematically by a sediment routing model that is used as a component of the total model.     

Low energy comsumption management of agricultural residues

In this paper, a mechanical filtering system to treat pig slurry is proposed. The filter was made from the aerobic decomposition product of the organic fraction of municipal wastes and wheat straw was used as the support.Using a pilot plant to treat 2100 liters of swine slurry, an adequate reduction in BOD₅; COD, and other parameters was obtained. The organic matter content of the material trapped in the filter was similar to that of compost and farmyard manure, but the nitrogen and phosphorous levels and the C/N ratio were more similar to farmyard manure. After passing through a filtering system, the treated liquid can be used for fertirrigation and as a feed for algae ponds. After a period of stabilization, the solid material can be mixed to produce manure. Although wheat straw was used as the support in this experiment, other agricultural wastes such as rice straw, corn stalks, millet stems, banana, cotton, and coconut trash can be used. Rather than municipal solid waste compost, other kinds of compost obtained from agricultural wastes such as leaves, bark, husks, etc., can be used as the filter.     

Mitigation of hydrogen fluoride aerosols by dry powders

Fluid bed tests were used to determine overall reaction rates for eight different dry powders of low hazard and toxicity before and after reaction with HF. In flow chamber tests, a representative oxide, hydroxide and carbonate were used to measure the efficiency of mitigation of an HF aerosol cloud. The results show that dry powders provide a valid alternative to water spray mitigation. Powder efficiencies are higher than water efficiencies at constant weight ratio.

At present, no attempt has been made to provide any technical designs or layouts for powder mitigation systems. However, the technology for smaller systems is available through manufacturers of dry powder chemical fire extinguisher equipment. When these powders are kept dry and under nitrogen atmosphere, a shelf life of several years can be expected.     

Time series analysis of coal mine accident experience

This study investigates several forecasting techniques that can be useful to mine safety managers for studying mine accident rate behavior. Three time series models were studied for extrapolation of accident rates. These models are applied to historical accident incidence data from a coal mine. Further, a method is presented for evaluating the three models for the selection of an appropriate model. For this particular mine application, it is concluded that the more complex Box-Jenkins ARMA model as well as first order autoregressive model do not give better results than the simple exponential smoothing model. However, when the random variations or autocorrelations in the accident experience rates between periods are different, the models may predict differently. As such, specific models must be developed for each mine on the basis of statistical analysis of the mine accident experience data over time. Moreover, the importance of incorporating human judgement to interpret the results of statistical forecasting cannot be overemphasized. Integration of policy or operating changes, which may impact mine safety performance, with statistical forecasting techniques is essential to arrive at a realistic prediction of future performance.     

ON THE USE OF SEEPAGE METERS TO ESTIMATE GROUNDWATER NUTRIENT LOADING TO LAKES1

Data from a study on East Lake Tohopekaliga, Florida, indicate that the seepage meter measurement method may often overestimate nutrient contributions to lakes. Nutrient loading data from this method and a method employing lakeside piezometer nutrient data and seepage meter flows were not comparable. Seepage nutrient loading from the meter and piezometer methods comprised 39 and 18 percent of the nitrogen budget and 38 and 9 percent of the phosphorus budget, respectively, for East Lake Tohopekaliga. In terms of water, groundwater seepage accounted for only 14 percent of the total input to the lake. It is felt that some of the past studies using the seepage meter method to estimate nutrient loading may be in error due to reasons related to the enclosure of lake sediments by the meter and the accompanying anaerobic conditions which quickly result.     

Treatment of risk in environmental impact assessment

Risk assessment and environmental impact assessment have developed as separate traditions. While environmental impact assessment is a broad field that includes all activities that attempt to analyze and evaluate the effects of human and related actions on the environment, risk assessment has been concerned with the relatively well-defined regulatory problems and employs formal quantitative analysis of the probability of specific undesired events, such as cancer. Risk analytic approaches, particularly the explicit treatment of uncertainty, can significantly contribute to environmental assessments. This article discusses the type and sources of uncertainty in environmental assessments, techniques for their quantification, and ways to use uncertainty estimates to calculate probabilities of effects or probabilities of exceeding environmental standards and to determine the need for mitigation or additional research.This article was presented at the International Institute of Applied Systems Analysis, Task Force Meeting on Risk and Policy Analysis under Conditions of Uncertainty, Laxenburg, Austria, November 1985.