A method for screening for the risk of chronic effects of surface water pollution

The article describes a method for screening for the risk of chronic surface water pollution which was developed at the T. G. Masaryk Water Research Institute. The approach, which is based on exotoxicological analyses, can be classed as a rapid method of assessment. The degree of risk of chronic effects surface water pollution is determined from an evaluation of two major parameters—toxicity and genotoxicity. As the method utilizes relative simple procedures for sample collection, pretreatment of the sample, chemical analyses, bioassays and results assessment, this approach is suitable for widespread practical use. Extensive utilization of this approach for assessing river basins in the Czech Republic has proved its suitability for a more sophisticated detection of the biological impact of surface water pollution. This is documented in the article where the method is used in a study of the Bílina River, and in the overview of the results of the risk assessment of chronic effects of surface water pollution in selected sections of three international river basins in the Czech Republic.     

Changes in tropopause height for the Eurasian region determined from CARDS radiosonde data

Previous studies have identified the tropopause height (TH) as a promising fingerprint of climatic change. In the present paper, we report variations in TH for the Eurasian region over the period 1973–1998 and analyse the influence of the Northern Annular Mode (NAM) on these variations. As previous studies indicate that the greatest increases in TH occur in the extratropics, we focused our attention on this area. We applied a set of homogenization procedures to radiosonde data and considered three different scenarios that take into account change points and the main volcanic eruptions over the study period. Our results demonstrate that the number of stations with positive TH trends is very sensitive to the quality of data and the methods used to remove inhomogeneities. Consequently, when change points were included in the analysis, the number of stations with positive trends decreased markedly. Furthermore, stratospheric NAM appears to control TH in stations located at latitudes higher than 55°N.Electronic supplementary materials  Supplementary material is available for this article at and is accessible to authorized users.     

Comparative use of bacterial, algal and protozoan tests to study toxicity of azo- and anthraquinone dyes

Toxicity of two azo dyes (Reactive Orange 16 (RO16); Congo Red (CR)) and two anthraquinone dyes (Remazol Brilliant Blue R (RBBR); Disperse Blue 3 (DB3)) were compared using bacterium Vibrio fischeri, microalga Selenastrum capricornutum and ciliate Tetrahymena pyriformis. The following respective endpoints were involved: acute toxicity measured as bacterial luminescence inhibition, algal growth inhibition, and the effects on the protozoa including viability, growth inhibition, grazing effect and morphometric effects. In addition, mutagenicity of the dyes was determined using Ames test with bacterium Salmonella typhimurium His(-). DB3 dye was the most toxic of all dyes in the bacterial, algal and protozoan tests. In contrast to other dyes, DB3 exhibited mutagenic effects after metabolic activation in vitro in all S. typhimurium strains used. Of the methods applied, the algal test was the most sensitive to evaluate toxicity of the dyes tested.     

Effects of polyaluminium chloride on the freshwater invertebrate Daphnia magna

In a number of countries across the world, aluminium in the form of polyaluminium chloride has been used in the treatment of freshwaters for the direct removal of cyanobacteria, or phosphorus removal, but knowledge about its effect on zooplankton species is poor. In our study, polyaluminium chloride toxicity was tested on both artificial and natural freshwaters for a better understanding and prediction of effects in real ecosystems. Our results indicate that prediction of effects in a real ecosystem based on standard ISO methods is insufficient, and tests with nontarget species (including invertebrates) should be done before each treatment using the water samples from the treated location. Effective concentrations of polyaluminium chloride can differ markedly according to the type of water composition used in the assay. Our experiments proved that EC₅₀ values can fluctuate between 9.89 and 54.29 mg·L^?1 of Al³⁺, and the toxicity is dominantly dependent on the treated water conductivity. This parameter seems to be the dominant source of different effects on zooplankton species after treatment and thus should be properly tested before each use of polyaluminium chloride as a treatment compound.     

Simple assessment of the reactive aluminium in sediments

The mobility of aluminium in sediments was evaluated through a one-step extraction with a strong chelating agent. Single and sequential extraction procedures for the extraction of Al were applied to four sediments from a polluted region. A single-step extraction with 0.05 mol L⁻¹ ethylenediaminetetraacetic acid (EDTA) was used, and compared with a standardized SEP as reference. The Al contents extracted into Na₂EDTA were in good agreement with the sequential extraction that yeilds mobile and potentially mobile portion of Al. Extracted EDTA contents make up more than 70% of the first-three-step sum of the five-step extraction procedure. Thus, Na₂EDTA extraction of Al could be applied to assess aluminium mobility changes in sediments and soils.     

Atypisches Wurzelwachstum vonSolanum laciniatum Ait. durch Tryptophan und Tyrosin

The Science of Nature -     

Information system for the registration of pollution sources associated with construction activities

A prospective builder in Czech Republic has to apply for approval by local (regional, state) authorities and is liable, in the Environmental Impact Assessment (EIA) process to make an accurate statement of stress factor values produced during the life cycle of the construction work.These data should be kept in the information system, as only a substantial amount of relevant high quality data can be used in the decision-making process.Identifying and quantifying stress factors produced by a given construction activity can present a problem due to inadequate knowledge and opinion in this field. For large construction works, a knowledge-based system proposed in the second part of this paper may be useful; small structures can be covered by the information given as to local factors, which form part of the information system proposed by Vlcek and Moos (1991).