Metal/metalloid contamination and isotopic composition of lead in edible mushrooms and forest soils originating from a smelting area

High metal contents in edible mushrooms growing in severely contaminated industrial areas pose an important toxicological risk. In the presented study, trace element (Pb, Cd, Zn, Cu, Ag, As, Se) contents were determined in caps and stipes of three different edible mushroom species (Boletus edulis Bull. Fr., Xerocomus badius Fr. Gilb., Xerocomus chrysenteron Bull. Quél.). Additionally, information about the chemical fractionation of metals in separate soil horizons and Pb isotopic data from soils and fruiting bodies allowed a more detailed insight on the uptake mechanisms of metals by the studied mushroom species. Total metal and metalloid concentrations in the organic soil horizons reached 36234 mg Pb kg(-1); 11.9 mg Cd kg(-1); 519 mg Zn kg(-1); 488 mg Cu kg(-1); 25.1 mg Ag kg(-1); 120 mg As kg(-1) and 5.88 Se mg kg(-1). In order to evaluate the accumulation capacity of the studied species, bioconcentration factors (BCF) were calculated for separate trace elements. For selected metals (Pb, Cd, Zn, Cu), a modified BCF calculation (using EDTA-extractable concentrations of metals in soil) was proposed. High contents of Pb (up to 165 mg kg(-1)) and Cd (up to 55 mg kg(-1)) exceeded all the regulatory limits in all the studied species. This was also the case for Se (up to 57 mg kg(-1)) in B. edulis. Intensive consumption of this species grown in such polluted areas can therefore pose toxicological risks for human health. A novel finding was that X. badius can act as an Ag accumulating species when grown at polluted sites due to the high concentrations of Ag (up to 190 mg kg(-1)) in caps. Pb isotopic data showed that Pb originating from the recent air pollution control residues is present mainly in the exchangeable/acid-extractable fraction of the organic horizons and is taken up by fruiting bodies; especially in the case of B. edulis, where fast Pb accumulation occurs. Due to the high species-dependent variations of metal contents, the studied mushrooms are not suitable as bioindicators of environmental pollution.     

Socio-demographic determinants of municipal waste generation: case study of the Czech Republic

Journal of Material Cycles and Waste Management - Increasing pressure of the European Union on diverting municipal waste from landfills requires an active role of households and commands a radical...     

Heterogeneous response of central European streams to decreased acidic atmospheric deposition

We investigated the relations between mountain streamwater chemistry and atmospheric pollution in an arca of 1611 km2 of the Czech Republic by comparing concentrations of SO4. NO3, Cl, Ca and the pH at 432 localities at the time of high (1984-1986) and relatively low (1996-2000) acidic atmospheric deposition. Medians of Cl. SO4, and NO3 decreased by 17, 96 and 60 microeq l(-1), or by 23, 17 and 49%, respectively, during 12 +/- 2 years. The decreased Cl corresponds to decreased emission of industrial Cl (as HCl). The decreased stream SO4 was proportionally lower than the 71% decrease in S-emissions due to leaching of previously accumulated SO4 from soils and non-zero background concentrations. Decreases of NO3 up to 60% in streamwaters with pH < or = 6 was greater than the decrease of N emission in central Europe, about 35%. Extensive regional decrease of NO3 is surprising and is probably described for the first time. The difference in NO3 concentrations between the two periods was probably enhanced by (a) an increase of mineralisation of forest floor in the mid-1980s and (b) by higher uptake of N in the late-1990s. The median pH of the 432 streams did not change but the pH of the sub-population with pH < 6 in the mid-1980s recovered substantially. The pH of circum-neutral streams (pH > 6.5) decreased even as acidic atmospheric deposition decreased.     

The use of mosses and pine needles to detect persistent organic pollutants at local and regional scales

Polycyclic aromatic hydrocarbons (PAHs) were analysed in mosses (Hypnum cupressiforme) and pine needles (Pinus sylvestris) collected in the Czech Republic between 1988-94 at a regional background site in Kosetice, south Bohemia (1988-94) and two industrial sources. One industrial site (sampled 1989-91) in middle Moravia, was near a factory producing PAHs, carbon black and phthalates, the other (sampled 1991-93) near a coal and gas fuel production plant in western Bohemia. Selected chlorinated pesticides and polychlorinated biphenyl congeners were also analysed in samples at the regional background site. This study clearly shows that vegetation sampling can be used to show spatial differences in the atmospheric burden of a range of persistent organic pollutants with differences in the mixtures of compounds reflecting differences in their regional or local use/atmospheric emission.     

Identification of magnetic particulates in road dust accumulated on roadside snow using magnetic, geochemical and micro-morphological analyses

The aim of this study is to test the applicability of snow surveying in the collection and detailed characterization of vehicle-derived magnetic particles. Road dust extracted from snow, collected near a busy urban highway and a low traffic road in a rural environment (southern Finland), was studied using magnetic, geochemical and micro-morphological analyses. Significant differences in horizontal distribution of mass specific magnetic susceptibility (χ) were noticed for both roads. Multi-domain (MD) magnetite was identified as the primary magnetic mineral. Scanning electron microscope (SEM) analyses of road dust from both roads revealed: (1) angular-shaped particles (diameter ∼1-300 μm) mostly composed of Fe, Cr and Ni, derived from circulation of motor vehicles and (2) iron-rich spherules (d ∼ 2-70 μm). Tungsten-rich particles (d < 2 μm), derived from tyre stud abrasion were also identified. Additionally, a decreasing trend in χ and selected trace elements was observed with increasing distance from the road edge.     

Chlorpyrifos degradation in Turkish soil

Degradation of chlorpyrifos was evaluated in laboratory studies. Surface (0-15 cm) and subsurface (40-60 cm) clay loam soils from a pesticide-untreated field were incubated in biometer flasks for 97 days at 25 degrees C. The treatment was 2 micrograms g-1 [2,6-pyridinyl-14C] chlorpyrifos, with 74 kBq radioactivity per 100 g soil flask. Evolved 14CO2 was monitored in KOH traps throughout the experiment. Periodically, soil subsamples were also methanol-extracted [ambient shaking, then supercritical fluid extraction (SFE)], then analyzed by thin-layer chromatography. Total 14C and unextractable soil-bound 14C residues were determined by combustion. From the surface and subsurface soils, 41 and 43% of the applied radiocarbon was evolved as 14CO2 during 3 months incubation. The time required for 50% loss of the parent insecticide in surface and subsurface soils was about 10 days. By 97 days, chlorpyrifos residues and their relative concentration (in surface/subsurface) as % of applied 14C were: 14CO2 (40.6/42.6), chlorpyrifos (13.1/12.4), soil-bound residues (11.7/11.4), and 3,5,6-trichloropyridinol (TCP) (3.8/4.8). Chlorpyrifos was largely extracted by simple shaking with methanol, whereas TCP was mainly removed only by SFE. The short persistence of chlorpyrifos probably relates to the high soil pH (7.9-8.1).     

New approach to common removal of dioxins and NOx as a contribution to environmental protection

Meeting environmental limits represents the most important issue in the field of waste processing. Our primary effort consists either in eliminating hazardous emissions or in prevention of their production. However, this is not feasible in most cases therefore the so called secondary methods have to be applied. Technologies based on adsorption of hazardous compounds using activated carbon, deNOx/deDiox technologies as well as technology of catalytic filtration using a special material REMEDIA^® proved itself to be very efficient. The latter technology consists in using a baghouse with bags manufactured from a special material (two layers – membrane from ePTFE and felt with bound in catalyst) called REMEDIA^® which has successfully been used for removal of PCDD/F during recent period. However, it has been found that this technology can partially remove NOx as well. Based on our experience from operation industrial incineration plants it has been proved that even after more than three years' operation the activity of filtration material was not decreased and efficiency of dioxins removal from flue gas ranges from 97 to 99% (Pa?ízek et al., 2008).Based on industrial experience and new findings it has been decided to focus continuing research and development on deNOx experiments by applying SCR using the above mentioned efficient filtration material. This type of material is primarily designed for reduction of PMs and PCDD/F. Experiments with this filtration material should test possibilities for simultaneous reduction of PMs, PCDD/F and NOx. Tests are performed in MSW incineration plant utilizing new experimental unit and under standard conditions. Waste processing capacity of the incineration plant amounts to 15 t/h. Tests result in evaluation of overall reduction efficiency and negative factors that might influence the efficiency. Catalytic filtration is further compared to other types of deNOx methods.Thus we have obtained qualitatively new knowledge about this method the value of which is emphasized by full scale industrial testing.     

Investigating the role of smartness for sustainability: insights from the Smart Grid domain

Over the past decades, information and communication technologies (ICT) established themselves as the key force towards more effective and efficient usage of resources in our society, namely via better use of available information, automation, stakeholder involvement, and decision support. By analyzing recent advancements in knowledge offered by ICT, it is possible to identify their strong correlation with the principles, aims, and interests of sustainability science, which can be highly inspired by ICT-intensive domains. In this paper, we study the theoretical background on system thinking as an interpretative lens able to support better understanding of dimensions and dynamics involved in the domain of sustainability, and examine the role of ICT in advancing sustainability goals. Then, we analyze the domain of the Smart Grid as a prominent example of complex technological contribution in face of the challenges of sustainability, and present the insights from this domain, which are turned into sustainability guidelines for other domains, linking smartness, and sustainability in the light of systems thinking and Smart Grid experience. In summary, the core recommendation of this work is the employment of information technology to widen the scope of the sustainability “game” by sliding activities in time and space, and in engaging more “players” in the game, which is now made possible thanks to the advancement in ICT.