Volatilization of mercury from natural water by a broad-spectrum Hg-resistantBacillus pasteurii strain DR2

Summary A broad-spectrum mercury-resistant bacterial strain was isolated from contaminated water and was identified as Bacillus pasteurii strain DR2. It could volatilize Hg-compounds including organomercurials from its growth media. It utilized several aromatic compounds as a sole source of carbon. The bacterial strain eliminated HgCl₂ from sterile river water and the presence of benzene, toluene, naphthalene and nitrobenzene at 1 mM concentration in the system increased the rate of mercury volatilization, the volatilization rate being highest with benzene. When 1.7×10⁷ cells of this bacterial strain were added per ml of non-sterile water the bacterial strain volatilized more than 90 percent of mercury from mercuric chloride and organo-mercurials like PMA, thiomersol and methoxy ethyl mercuric chloride (MEMC). In the absence of this bacterial strain the volatilization of PMA and MEMC due to the presence of other Hg-resistant organisms in nonsterile polluted water ranged between 20–25 percent and of HgCl₂ was about 40 percent. However, in the presence of B. pasteurii DR2 volatilization of these Hg-compounds from non-sterile water increased by 20–40 percent. In the presence of 1 mM benzene the rate of mercury volatilization was even higher. In all the cases the rate of volatilization was higher in the first seven days than in the next seven days.Professor A. Mandal, MSc, PhD is Head of the Department of Biochemistry at the University College of Science, 35 Ballygunge Circular Road, Calcutta 700019, to whom correspondence should be addressed. His co-workers are Dr K. Pahan, Postdoctoral Associate, Department of Cell Biology and Paediatrics, Medical University of South Carolina, USA; Dr J. Chaudhuri, Senior Lecturer, Department of Molecular Biology, BKC College, Calcutta, India; Dr D.K. Ghosh, Postdoctoral Associate, Department of Biochemistry, University College of Science, Calcutta, India; Dr R. Gachhui, Postdoctoral Associate, The Cleveland Clinic Foundation, Cleveland, USA; and Dr S. Ray, Postdoctoral Associate, The Johns Hopkins University School of Hygiene and Public Health, Department of Biochemistry, Baltimore, USA.     

Using biomass residues from oil palm industry as a raw material for pulp and paper industry: potential benefits and threat to the environment

Oil palm industries produce an enormous quantity of lignocellulosic biomass; in the form of large leaves of palm tree, pruned fronds (OPF) and oil palm trunks (OPT) at the plantations site. Besides this, the processing of fresh fruit bunches in the oil mills generates empty fruit bunches (EFB), shells, kernel cake and mesocarp fibers. The proper management of this burgeoning waste and its disposal is an ardent task and creates environmental hazards. In order to deal with the biomass residues, the urgent need is that it should be transformed into resources with industrial utility. As the economic development has resulted in the significant increased demand for paper, the industry is looking for eccentric sources to fulfill the requirement. The pulp and paper industry preferred use of coniferous and deciduous trees for papermaking because their cellulose fibers in the pulp make durable paper. With improvements in pulp processing technology, fibers of almost any non-wood of plants species like bamboo, cereal straw, sugarcane, flax, hemp and jute can be used for paper pulp. Substituting this lignocellulosic material can reduce the burden on forest while supporting the natural biodiversity. The present review deals with the possibilities of using oil palm biomass as a raw material for pulp and papermaking, as this would ameliorate its waste management problem. The potential of oil palm biomass and the challenges regarding its use in papermaking are discussed. The use of oil palm biomass will apparently prove that the oil palm industry is ecofriendly in every aspect of its activities and aid in sustainability of forest ecosystem.     

An update on pathophysiology and treatment of sports-mediated brain injury

Environmental Science and Pollution Research - Traumatic brain injury (TBI) is a neurological disorder which represents a major health issue worldwide. It causes mortality and disability among all...     

Arsenic bioaccumulation in rice and edible plants and subsequent transmission through food chain in Bengal basin: a review of the perspectives for environmental health

Arsenic (As) is a metalloid that poses serious environmental threats due to its behemoth toxicity and wide abundance. The use of arsenic-contaminated groundwater for irrigation purpose in crop fields elevates arsenic concentration in surface soil and in the plants. In many arsenic-affected countries, including Bangladesh and India, rice is reported to be one of the major sources of arsenic contamination. Rice is much more efficient at accumulating arsenic into the grains than other staple cereal crops. Rice is generally grown in submerged flooded condition, where arsenic bioavailability is high in soil. As arsenic species are phytotoxic, they can also affect the overall production of rice, and can reduce the economic growth of a country. Once the foodstuffs are contaminated with arsenic, this local problem can gain further significance and may become a global problem, as many food products are exported to other countries. Large-scale use of rainwater in irrigation systems, bioremediation by arsenic-resistant organisms and hyperaccumulating plants, and the aerobic cultivation of rice are some possible ways to reduce the extent of bioaccumulation in rice. Investigation on a complete food chain is urgently needed in the arsenic-contaminated zones, which should be our priority in future researches.     

A study on abundance and distribution of mangrove species in Indian Sundarban using remote sensing technique

Conservation and management of Sundarban mangrove forest is difficult chiefly due to inaccessibility and hostile condition. Remote sensing serves as an important tool to provide up-to date baseline information which is the primary requirement for the conservation planning of mangroves. In this study, supervised classification by maximum likelihood classifier (MLC) has been used to classify LANDSAT TM and LANDSAT ETM satellite data. This algorithm is used for computing likelihood of unknown measurement vector belonging to unknown classes based on Bayesian equation. Image spectra for various mangrove species were also generated from hyperspectral image. During field visits, GPS locations of five dominant mangrove species with appreciable distribution were taken and image spectra were generated for the same points from hyperion image. The result of this classification shows that, in 1999 total mangrove forest accounted for 55.01 % of the study area which has been reduced to 50.63 % in the year 2010. Avicennia sp. is found as most dominating species followed by Excoecaria sp. and Phoenix sp. but the aerial distribution of Avicennia sp., Bruguiera sp. and Ceriops sp. has reduced. In this classification technique the overall accuracy and Kappa value for 1999 and 2010 are 80 % and 0.77, 85.71 % and 0.81 respectively.     

Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites

In the present study, influence of talc on thermal, mechanical and rheological behavior of PLA is investigated and the structure?Cproperty correlation for the PLA/talc composites is established. Poly(lactic acid)/talc composites are prepared by melt mixing of PLA with talc in twin screw extruder followed by blown film processing. Various characterizations techniques are used to evaluate thermal, morphological, mechanical and rheological behavior of PLA/talc composites and its blown film. DSC analysis showed that degree of crystallinity of PLA/talc composites was higher than that of neat PLA because of nucleating ability of talc. Spherulite morphology of PLA/talc composites showed that talc has increased nucleation density of spherulite having smaller radius than that of neat PLA. Talc is effective in enhancing tensile modulus and storage modulus of PLA due to reinforcing ability of talc particles.     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.