Vegetation response to hydrologic and geomorphic factors in an arid region of the Baja California Peninsula

Remotely sensed imageries were used to analyze the response of desert vegetation to physiographic factors and accumulated precipitation in drier and wetter years within a region of >16,500 km² sampled with 5,000 random pixels of 30 m. Vegetation development was indexed by the annual maximum values for greenness (SAVI) and canopy water content (NDII). Precipitation was interpolated from the 0.25° grid of the Tropical Rainfall Measurement Mission satellite-based estimates, showing a regional average of ～55 mm in the wetter year. The vegetation indices were only weakly related to total precipitation, often in a negative sense. Terrain factors that most often affected the vegetation indices, in multiple regression models, were Topographic Wetness Index, elevation, and slope gradient; these often had different signs for SAVI and for NDII. Models for NDII on intrusive igneous rocks gave better results than on extrusive igneous rocks. The strongest patterns in vegetation development were the contrast among Pacific coast, Cordillera, and Gulf coast subregions and the generally stronger results for NDII than SAVI.     

Spatial and temporal variability of metals in inter-tidal beach sediment of Mumbai, India

Nine metals were monitored in the beach sediment in Mumbai from May 2011 to March 2012 to evaluate the spatial and temporal distributions. The average heavy metal concentrations exhibited the following order: Fe > Mn > Cr > Co > Ni > Pb > Zn > Cu > Cd for the four sampling sites. The mean concentrations (± SD) of Fe, Mn, Cr, Co, Ni, Pb, Zn, Cu and Cd were estimated to be 31.15?±?10.02 g kg^?1, 535.04?±?76.42, 151.98?±?97.90, 92.76?±?14.18, 67.52?±?11.32, 59.57?±?15.19, 54.65?±?15.01, 32.24?±?8.07 and 18.75?±?1.76 mg kg^?1, respectively. The results indicated that the sediments were polluted with Cd, Cr, Co and Pb due to high anthropogenic influences. Spatial variation of metals revealed that most of the metals were high in Dadar beach and low in Aksa beach. Cd was the highest contaminant metal studied with a mean contamination factor of 93.75. The pollution load indices of the studied beaches ranged from 1.63 (Aksa) to 1.91 (Dadar) and indicated that the beach sediments were polluted with heavy metals. The heavy metal contents increased in relation to monsoon, and most of the heavy metals showed significantly high concentrations in November during the post-monsoon. The statistical analysis revealed significant effect of study site on all the metals studied. Further, there was a significant difference on metal accumulation on bimonthly basis in relation to weather pattern in Mumbai beaches.     

Tolerance values of benthic macroinvertebrates for stream biomonitoring: assessment of assumptions underlying scoring systems worldwide

Tolerance values (TVs) based on benthic macroinvertebrates are one of the most widely used tools for monitoring the biological impacts of water pollution, particularly in streams and rivers. We compiled TVs of benthic macroinvertebrates from 29 regions around the world to test 11 basic assumptions about pollution tolerance, that: (1) Arthropoda are < tolerant than non-Arthropoda; (2) Insecta < non-Insecta; (3) non-Oligochaeta < Oligochaeta; (4) other macroinvertebrates < Oligochaeta + Chironomidae; (5) other macroinvertebrate taxa < Isopoda + Gastropoda + Hirudinea; (6) Ephemeroptera + Plecoptera + Trichoptera (EPT) < Odonata + Coleoptera + Heteroptera (OCH); (7) EPT < non-EPT insects; (8) Diptera < Insecta; (9) Bivalvia < Gastropoda; (10) Baetidae < other Ephemeroptera; and (11) Hydropsychidae < other Trichoptera. We found that the first eight of these 11 assumptions were supported despite regional variability. In addition, we examined the effect of Best Professional Judgment (BPJ) and non-independence of TVs among countries by performing all analyses using subsets of the original dataset. These subsets included a group based on those systems using TVs that were derived from techniques other than BPJ, and groups based on methods used for TV assignment. The results obtained from these subsets and the entire dataset are similar. We also made seven a priori hypotheses about the regional similarity of TVs based on geography. Only one of these was supported. Development of TVs and the reporting of how they are assigned need to be more rigorous and be better described.     

Polycyclic aromatic hydrocarbons (PAHs) in surface sediments from the Bizerte Lagoon,Tunisia: levels,sources, and toxicological significance

To assess the status of polycyclic aromatic hydrocarbon (PAH) contamination in sediments from the Bizerte Lagoon (northern Tunisia), 18 surface sediment samples were collected in March 2011 and analyzed for 14 US Environmental Protection Agency priority PAHs by high-performance liquid chromatography. The total concentrations of the 14 PAHs (ΣPAHs) ranged from 16.9 to 394.1 ng g^?1 dry weight (dw) with a mean concentration of 85.5 ng g^?1 dw. Compared with other lagoons, coasts, and bays in the world, the concentrations of PAHs in surface sediments of the Bizerte Lagoon are low to moderate. The PAHs’ composition pattern was dominated by the presence of four-ring PAHs (45.8 %) followed by five-ring (26.8 %) and three-ring PAHs (12.7 %). The PAH source analysis suggested that the main origin of PAHs in the sediments of the lagoon was mainly from pyrolytic sources. According to the numerical effect-based sediment quality guidelines of the USA, the levels of PAHs in the Bizerte Lagoon should not exert adverse biological effects. The total benzo[a]pyrene toxicity equivalent values calculated for the samples varied from 3.1 to 53.7 ng g^?1 dw with an average of 10.6 ng g^?1 dw.     

Impact of rapid urbanisation and industrialisation on river sediment metal contamination

This study aimed at evidencing contaminant inputs from a rapidly growing population and the accompanying anthropogenic activities to river sediments. The Fez metropolitan area and its impacts on the Sebou's sediments (the main Moroccan river) were chosen as a case study. The Fez agglomeration is surrounded by the river Fez, receiving the wastewaters of this developing city and then flowing into the Sebou. The sediment cores from the Fez and Sebou Rivers were extracted and analysed for major elements, butyltins and toxic metals. Normalised enrichment factors and geoaccumulation index were calculated. Toxicity risk was assessed by two sets of sediment quality guideline (SQG) indices. A moderate level of contamination by butyltins was observed, with monobutyltin being the dominant species across all sites and depths. The lowest level of metal pollution was identified in the Sebou's sediments in upstream of Fez city, whilst the Fez' sediments were heavily polluted and exhibited bottom-up accumulation trends, which is a clear signature of recent inputs from the untreated wastewaters of Fez city. Consequently, the sediments of Fez and Sebou at the downstream of the confluence were found to be potentially toxic, according to the SQG levels. This finding is concerned with aquatic organisms, as well as to the riverside population, which is certainly exposed to these pollutants through the daily use of water. This study suggests that although Morocco has adopted environmental regulations aiming at restricting pollutant discharges into the natural ecosystems, such regulations are neither well respected by the main polluters nor efficiently enforced by the authorities.     

Feature extraction using Hough transform for solid waste bin level detection and classification

This paper deals with the solid waste image detection and classification to detect and classify the solid waste bin level. To do so, Hough transform techniques is used for feature extraction to identify the line detection based on image’s gradient field. The feedforward neural network (FFNN) model is used to classify the level content of solid waste based on learning concept. Numbers of training have been performed using FFNN to learn and match the targets of the testing images to compute the sum squared error with the performance goal met. The images for each class are used as input samples for classification. Result from the neural network and the rules decision are used to build the receiver operating characteristic (ROC) graph. Decision graph shows the performance of the system waste system based on area under curve (AUC), WS-class reached 0.9875 for excellent result and WS-grade reached 0.8293 for good result. The system has been successfully designated with the motivation of solid waste bin monitoring system that can applied to a wide variety of local municipal authorities system.     

Combustion characteristics of asphalt and sodium compounds

Risk evaluation of mixtures of asphalt and inorganic salts such as sodium nitrate, sodium nitrite, sodium carbonate and sodium dihydrogenphosphate was conducted. The ignition and the combustion characteristics of mixtures of asphalt and oxidizing salts were obtained. Quasi-heat-accumulation experiments of asphalt–salt mixtures were conducted using about 1 kg samples. Six types of asphalt–salt mixtures were made and their ignition characteristics were examined in the quasi-heat-accumulation experiments. Then to clarify burning behavior of the asphalt–salt mixtures, experiments for understanding their combustion characteristics were conducted using a cone calorimeter.

The main results are as follows.

(1) In the quasi-heat-accumulation experiment, a region with high concentration of the salt mixture particles was made at the bottom of the sample vessel through the process of their sedimentation. An exothermic reaction started in this region. Just before the asphalt–salt mixture was ignited, a huge amount of white smoke was released. A kind of jet flame of a few meters in height was created.

(2) Based on the data of ignition temperature from the cone calorimeter experiments, ignition of asphalt was caused by a chemical reaction of asphalt with an oxidizing salt. The combustion of the asphalt–salt mixture contained the self-heating reaction.     

A study on the obstacle-induced variation of the gas explosion characteristics

A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas explosion vessels. It has been well known that the obstacles in pipes and long ducts would accelerate the flame propagation, and cause the transition from deflagration to detonation. In this study, the explosion characteristics and the flame behavior of vented explosions and constant-volume explosions were investigated. Experiments were carried out in a 270-liter and 36-liter hexahedron vessels filled with LPG–air mixture. The explosion characteristics of the gas mixture were determined by using a strain-responding pressure transducer. The flame behavior was recorded by using a high-speed video camera. The shape and the size of the obstacle, and the gas concentration, were adjusted in the experiments.

It can be seen from the experimental results that, instead of being accelerated, the flame propagation inside the explosion vessel is decelerated by the plate obstacles fixed at the bottom of the vessel. Also, the characteristics of the enclosed explosion are not so affected by the built-in obstacles as those of the vented explosion are. It is believed that the eddy-induced turbulence behind the obstacle decelerates the flame propagation.     

Enhancing corporate compliance with worksite safety and health legislation

Introduction: A 2-year prospective study evaluated the effectiveness of a managerial training program to enhance corporate compliance with statewide worksite safety and health regulations. The program offered participants information about regulatory requirements and emphasized organizational and environmental strategies for reducing occupational injuries and illnesses. Objectives: To assess the effects of a train-the-trainer program on business managers' knowledge of statewide occupational safety and health legislation and on levels of corporate compliance with regulatory requirements. Methods: Forty-eight small- and medium-sized companies participated in the training sessions during the first year of the study. These firms were compared with 46 control companies that did not receive the training until the conclusion of the study. Results: Participation in the program was associated with higher levels of corporate regulatory compliance 12 months after the training sessions were held (controlling for baseline levels of corporate compliance with the regulations). Program effects on compliance levels were mediated by posttraining changes in managers' knowledge of regulatory requirements. Conclusions: The REACH OUT training program raised managers' awareness of and corporate compliance with statewide worksite safety and health regulations. Impact on Industry: Smaller companies face greater challenges than larger ones in developing and maintaining worksite safety and health programs. Barriers to regulatory compliance, especially in small- and medium-size companies, should be identified and removed to enhance the efficacy of these programs.     

Characteristics of the vibrating-mesh minimum ignition energy testing apparatus for dust clouds

A novel apparatus for testing the minimum ignition energies of flammable dusts is introduced. Unlike the conventional apparatus (the Hartmann tube), this new apparatus employs a vibrating mesh to produce a dust cloud. Using three kinds of powders, namely lycopodium, anthraquinone and polyacrylonitrile, which are designated as the samples for calibration by the International Electrotechnical Commission (IEC, 1994) standards, fundamental characteristics were experimentally investigated. Concerning the minimum ignition energies (MIEs), the new testing apparatus worked well for two samples, lycopodium and polyacrylonitrile. The MIE for anthraquinone, however, was by far larger than the expected value. We concluded that the aggregation of anthraquinone particles is the main cause of the difference and is attributable to both the tribo-charges acquired by the particles when passing through the mesh and the filamentary shape of the crystal. Other essential factors for characterizing the testing apparatus, such as the concentration of dust, the shape and spacing of the sparking electrode system, and the impedance of the sparking circuit are discussed.