Metabolic fate of mancozeb in tomato (Lycopersicon esculentum)

The metabolic fate of mancozeb in tomato (Lycopersicon esculentum Mill.) fruits was evaluated. Results indicate rapid dissipation of mancozeb and its metabolic conversion to ethylenethiourea (ETU), the carcinogenic metabolite. Treatment with mancozeb at flowering stage resulted translocation of ETU in newly emerged fruits indicating the systemic nature of ETU. ETU was detected within one hour of final spraying of mancozeb at the doses of 1.5 and 3?kg a.i./ha. The residue level of ETU increased up to 3-day for both the treatments, which then rapidly dissipated to safer metabolite ethyleneurea (EU) and reached the below detectable limit within 25 days. Cooking of fresh tomatoes caused decontamination of mancozeb residues, which was associated with simultaneous increase in ETU residues. The degradation pattern of ETU after application of mancozeb was slower as compared to the spraying of ETU as such on the crop. A pre-harvest interval of 25 days is recommended.     

Ammonia excretion of Artemia sp. (crustacea: Branchiopoda) under axenic conditions)

Ammonia excretion of the Utah strain of Artemia sp. grown in axenic culture media was followed throughout the different stages of larval development. The ammonia accumulated in the culture medium does not affect ammonia excretion rates under our laboratory conditions. Growth rate, density and starvation all affect ammonia excretion. Ammonia excretion is directly related to the numerical growth index and inversely related to Artemia sp. density. Starved adult Artemia sp. excrete considerably lower amounts of ammonia than brine shrimp grown in nutritive medium. In view of the difficulties often encountered in estimating the excretion rates of small crustaceans, our culture conditions would appear advantageous for further studies on the purine metabolism of Artemia sp.     

Morphology of single inhalable particle inside public transit biodiesel fueled bus

In an urban-transit bus,fueled by biodiesel in Toledo,Ohio,single inhalable particle samples in October 2008 were collected and detected by scanning electron microscopy and energy dispersive X-ray spectrometry(SEM/EDS).Particle size analysis found bimodal distribution at 0.2 and 0.5 μm.The particle morphology was characterized by 14 different shape clusters:square,pentagon,hexagon,heptagon,octagon,nonagon,decagon,agglomerate,sphere,triangle,oblong,strip,line or stick,and unknown,by quantitative order.The square particles were common in the samples.Round and triangle particles are more,and pentagon,hexagon,heptagon,octagon,nonagon,decagon,strip,line or sticks are less.Agglomerate particles were found in abundance.The surface of most particles was coarse with a fractal edge that can provide a suitable chemical reaction bed in the polluted atmospheric environment.The three sorts of surface patterns of squares were smooth,semi-smooth,and coarse.The three sorts of square surface patterns represented the morphological characteristics of single inhalable particles in the air inside the bus in Toledo.The size and shape distribution results were compared to those obtained for a bus using ultra low sulfur diesel.     

Lignin modification and valorization in medicine,cosmetics, environmental remediation and agriculture: a review

Environmental Chemistry Letters - The circular economy requires advanced methods to recycle biomass into value-added materials, such as lignin extraction and modification. Here, we review lignin...     

Hydrogeochemical processes controlling the high fluoride concentration in groundwater: a case study at the Boden block area,Orissa, India

The present investigation reports the assessment of hydrochemical/geochemical processes controlling the concentration of fluoride in groundwater of a village in India (Boden block, Orissa). Boden block is one of the severely affected fluoride-contaminated areas in the state of Orissa (India). The sampling and subsequent analysis of water samples of the study area was carried out following standard prescribed methods. The results of the analysis indicate that 36.60% groundwater F⁻ concentration exceeds the limit prescribed by the World Health Organization for drinking water. The rock interaction with groundwater containing high concentration of HCO₃⁻ and Na⁺ at a higher pH value of the medium could be one of the important reasons for the release of F⁻ from the aquatic matrix into groundwater. Geochemical classification of groundwater based on Chadha rectangular diagram shows that most of the groundwater samples having fluoride concentration more than 1.5 mg L⁻¹ belongs to the Na-K-HCO₃ type. The saturation index values evaluated for the groundwater of the study area indicated that it is oversaturated with respect to calcite, whereas the same is undersaturated with respect to fluorite content. The deficiency of calcium ion concentration in the groundwater from calcite precipitation favors fluorite dissolution leading to excess of fluoride concentration. The risk index was calculated as a function of fluoride level in drinking water and morbidity of fluorosis categorizes high risk for villages of Amera and Karlakote panchayat of Boden block.     

Microbial regeneration of spent activated carbon dispersed with organic contaminants: mechanism, efficiency, and kinetic models

Background and purpose

Regeneration of spent activated carbon assumes paramount importance in view of its economic reuse during adsorptive removal of organic contaminants. Classical thermal, chemical, or electrochemical regeneration methods are constrained with several limitations. Microbial regeneration of spent activated carbon provides a synergic combination of adsorption and biodegradation.

Methods

Microorganisms regenerate the surface of activated carbon using sorbed organic substrate as a source of food and energy. Aromatic hydrocarbons, particularly phenols, including their chlorinated derivatives and industrial waste water containing synthetic organic compounds and explosives-contaminated ground water are the major removal targets in adsorption?Cbioregeneration process. Popular mechanisms of bioregeneration include exoenzymatic hypothesis and biodegradation following desorption. Efficiency of bioregeneration can be quantified using direct determination of the substrate content on the adsorbent, the indirect measurement of substrate consumption by measuring the carbon dioxide production and the measurement of oxygen uptake. Modeling of bioregeneration involves the kinetics of adsorption/desorption and microbial growth followed by solute degradation. Some modeling aspects based on various simplifying assumptions for mass transport resistance, microbial kinetics and biofilm thickness, are briefly exposed.

Results

Kinetic parameters from various representative bioregeneration models and their solution procedure are briefly summarized. The models would be useful in predicting the mass transfer driving forces, microbial growth, substrate degradation as well as the extent of bioregeneration.

Conclusions

Intraparticle mass transfer resistance, incomplete regeneration, and microbial fouling are some of the problems needed to be addressed adequately. A detailed techno-economic evaluation is also required to assess the commercial aspects of bioregeneration.     

A review on optimization techniques for sizing of solar-wind hybrid energy systems

Solar and wind are inexhaustible, abundant, environmentally friendly and freely available renewable energy sources. Integration of these two sources has always been a complex optimization problem which requires efficient planning, designing and control strategies. Many researchers have designed cost effective and efficient hybrid solar-wind energy systems by using various available software tools and optimization algorithms. With the advancement in artificial intelligence methods, various new optimization techniques have been developed in the last few decades. This paper presents state of the art optimization methods applied to hybrid renewable based energy systems. A brief introduction of each technique is presented along with papers published in different reputed journals. This article also reviews different power management, control strategies and multi-objective optimization methods used for hybrid wind-solar systems. A case study is presented to demonstrate the efficacy of some of the algorithms.     

Bioefficacy,dissipation kinetics and safety evaluation of selected insecticides in Allium cepa L

This paper reports the bioefficacy of selected insecticides against thrips and their pre-harvest intervals (PHI) in onion pertaining to their recommended application rates and maximum residue limits. Profenophos, methomyl and imidacloprid showed comparatively higher bioefficacy against thrips. GC-MS and LC-MS/MS-based residue analysis methods in onion bulbs and composite matrix of bulbs+leaves were thoroughly validated. The residue data for bulb+leaves was assessed with reference to the EU-MRLs applicable for spring onion. Dimethoate was the most stable chemical with PHI of 52.5 days, followed by monocrotophos (24 days) and carbofuran (20.5 days). The PHIs of profenophos, chlorpyrifos, methomyl and cypermethrin were similar and within the range of 10–13 days. Imidacloprid and λ-cyhalothrin had similar PHI of 4.5 days. Spinosad was the fastest-degrading chemical with PHI of 2 days. The combined bioefficacy and residue dynamics information will support label-claim of these insecticides for the management of thrips in onion, help in scheduling their applications in pest management program as per relative PHIs and minimize the residue accumulations at harvest. The dietary exposure was less than the maximum permissible intake for most of the insecticides on all sampling days except for dimethoate and monocrotophos.     

Preparation of activated carbon from dried pods of Prosopis cineraria with zinc chloride activation for the removal of phenol

Utilization of agrowaste materials for the production of activated carbon, as an excellent adsorbent with large surface area, is well established industrially, for dephenolation of wastewater. In the present work, dried pods of Prosopis cineraria—a novel and low-cost agrowaste material—were used to prepare activated carbons by zinc chloride activation. Batch adsorption experiments were carried out to study the effects of various physicochemical parameters such as initial phenol concentration, adsorbent dose, initial solution pH, and temperature. Pseudo-first-order second-order and diffusion kinetic models were used to identify the possible mechanisms of such adsorption process. The Langmuir and Freundlich equations were used to analyze the adsorption equilibrium. Maximum removal efficiency of 86 % was obtained with 25 mg?L^?1 of initial phenol concentration. The favorable pH for maximum phenol adsorption was 4.0. Freundlich equation represented the adsorption equilibrium data more ideally than the Langmuir. The maximum adsorption capacity obtained was 78.32 mg?g^?1 at a temperature of 30 °C and 25 mg?L^?1 initial phenol concentration. The adsorption was spontaneous and endothermic. The pseudo-second-order model, an indication of chemisorption mechanism, fitted the experimental data better than the pseudo-first-order Lagergren model. Regeneration of spent activated carbon was carried out using Pseudomonas putida MTCC 2252 as the phenol-degrading microorganism. Maximum regeneration up to 57.5 % was recorded, when loaded phenol concentration was 25 mg?L^?1. The data obtained in this study would be useful in designing and fabricating an efficient treatment plant for phenol-rich effluents.