Dissipation and leaching of (14)C-monocrotophos in Soil Columns under subtropical climate

Dissipation and leaching behavior of 14C-monocrotophos was studied for 365 days under field conditions using PVC cylinders. The first set (24 cylinders) was spiked with 1.0 microCi 14C-labeled monocrotophos along with 1.06 mg unlabeled monocrotophos to give a concentration of 2 mg kg -1 in the soil up to 15 cm depth. The second set (24 cylinders) received 14C-labeled monocrotophos along with other non-labeled insecticides viz., dimethoate @ 300 g a.i ha-1, deltamethrin @ 12.5 g a.i ha-1, endosulfan @ 750 g a.i ha-1, cypermethrin @ 60 g a.i ha-1, and triazophos @ 600 g a.i ha-1 at an interval of 15 days each as recommended for the cotton crop. 14C-monocrotophos dissipated faster, up to 45% in first 90 days in columns treated with only monocrotophos compared to 25% in columns that received monocrotophos along with other insecticides. However, both the columns showed similar residues 180 days onward. After 180 days of treatment, 46% radiolabeled residues were observed, which reduced up to 39.6% after 365 days. Leaching of 14C-monocrotophos to 15-30 cm soil layer was observed in both the experimental setups. In the 15-30 cm soil layer of both soil columns, up to 0.19 mg 14C-monocrotophos kg-1d. wt. soil was detected after 270 days.     

Spatio-temporal assessment of ambient air quality,their health effects and improvement during COVID-19 lockdown in one of the most polluted cities of India

Environmental Science and Pollution Research - The present work aims to investigate seasonal variations in air pollution levels in Lucknow and assess the ambient air quality of the city together...     

Commercial landscape of noninvasive prenatal testing in the United States

Cell-free fetal DNA-based noninvasive prenatal testing (NIPT) could significantly change the paradigm of prenatal testing and screening. Intellectual property (IP) and commercialization promise to be important components of the emerging debate about clinical implementation of these technologies. We have assembled information about types of testing, prices, turnaround times, and reimbursement of recently launched commercial tests in the United States from the trade press, news articles, and scientific, legal, and business publications. We also describe the patenting and licensing landscape of technologies underlying these tests and ongoing patent litigation in the United States. Finally, we discuss how IP issues may affect clinical translation of NIPT and their potential implications for stakeholders. Fetal medicine professionals (clinicians and researchers), genetic counselors, insurers, regulators, test developers, and patients may be able to use this information to make informed decisions about clinical implementation of current and emerging noninvasive prenatal tests. © 2013 John Wiley & Sons, Ltd.     

Chromium phytoextraction from tannery effluent-contaminated soil by Crotalaria juncea infested with Pseudomonas fluorescens

The aim of present study was to remediate chromium (Cr)-contaminated soil by Crotalaria juncea in the presence of Pseudomonas fluorescens. Inoculation of P. fluorescens in pot soil grown with C. juncea significantly increased (~2-fold) the water-soluble (Ws) and exchangeable (Ex) Cr contents in contaminated soil under greenhouse condition. It also enhanced the chlorophyll content by 92 % and plant biomass by 99 % as compared to the uninoculated C. juncea plant. The analysis showed that root and shoot uptake of Cr in C. juncea inoculated by P. fluorescens was 3.08- and 2.82-fold, respectively. This research showed that the association of C. juncea and P. fluorescens could be a promising technology for increasing the soil Cr bioavailability and plant growth for successful phytoextraction of Cr from the contaminated soil.     

Transient design of landfill liquid addition systems

This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al., 2010a, Jain et al., 2010b. The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.     

Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching--a response surface modeling approach

The global crisis of the hazardous electronic waste (E-waste) is on the rise due to increasing usage and disposal of electronic devices. A process was developed to treat E-waste in an environmentally benign process. The process consisted of thermal plasma treatment followed by recovery of metal values through mineral acid leaching. In the thermal process, the E-waste was melted to recover the metal values as a metallic mixture. The metallic mixture was subjected to acid leaching in presence of depolarizer. The leached liquor mainly contained copper as the other elements like Al and Fe were mostly in alloy form as per the XRD and phase diagram studies. Response surface model was used to optimize the conditions for leaching. More than 90% leaching efficiency at room temperature was observed for Cu, Ni and Co with HCl as the solvent, whereas Fe and Al showed less than 40% efficiency.     

Effect of weed extracts on seedling growth of some varieties of wheat

Allelopathic effect ofAvena fatua L., Cyperus rotundus L., Polygonum hydropiper L., and Solanum nigrum L. were examined on seedling growth of certain commonly used varieties of wheat (Triticum aestivum L.) in the Tarai region of U.P. state. The weed extracts inhibited the length of plumule in all the varieties (100%) with Solanum and it was in 12 (92%), 10 (77%) and 06 (46%) varieties with Polygonum, Avena and Cyperus, respectively. In radicle length, it was in 92% with both Polygonum and Solanum; and 85% and 69% of the varieties with Avena and Cyperus, respectively. However, all the four weed extracts reduced the dry weight of plumule, radicle and total seedling in all the varieties (100%) of wheat except in HD--2329 with Cyperus, in which it was positive. The percent reduction (percentage of control) was more than 50% in 92%, 77%, 54% and 39% of the varieties, respectively with Solanum, Polygonum, Avena and Cyperus. Among the weed extracts, the inhibitory effect on seedling growth in different varieties followed the order: Solanum > Polygonum > Avena and > Cyperus. On the basis of the present results, UP--2003 and WH--542 followed by PBW--226, Sangam and HD--248 were more susceptible to all the four weed extracts compared to the rest of the varieties of wheat.     

Flammability Properties of Virgin and Recycled Polycarbonate (PC) and Acrylonitrile–Butadiene–Styrene (ABS) Recovered from End-of-Life Electronics

Acrylonitrile–Butadiene–Styrene (ABS), Polycarbonate (PC) and their alloys are widely used in automotive industry, computer and equipment housings. With increasing disposal of end-of-life electronic equipment, there is also an increased demand for recycling of these materials so that they do not pose environmental challenge as solid waste. One of the recycling approaches is mechanical recycling of these thermoplastics where recycled plastic is melt blended with virgin materials to obtain a high quality product. Besides obtaining desirable mechanical properties, such blends should also conform to fire safety standards. In this work, a series of blends were prepared using PC and ABS recovered from discarded computers and virgin materials using a twin-screw extruder. Their flammability properties were evaluated using burner flammability tests and Ohio State University (OSU) release rate tests. It was found that the extinguishing time, burning extent and weight loss appears to progressively decrease with the addition of both virgin or recycled PC to virgin or recycled ABS. It was also seen that the addition of the 70% of PC, virgin or recycled, to ABS virgin or recycled, appears to significantly decrease heat release and smoke evolution. The results of this study indicate that recycled polycarbonate can be used as an additive for virgin or recycled ABS, as a means of giving flame resistance to ABS in high-value applications. This result is significant when related to the result obtained by a separate study indicating that up to 25% of recycled material can be used without degradation of mechanical properties in the presence of 15% short glass fiber reinforcement.     

Occurrence of phthalic acid esters in Gomti River Sediment, India

Cadmium and lead are important environmental pollutants with high toxicity to animals and human. Soils, though have considerable metal immobilizing capability, can contaminate food chain via plants grown upon them when their built-up occurs to a large extent. Present experiment was carried out with the objective of quantifying the limits of Pb and Cd loading in soil for the purpose of preventing food chain contamination beyond background concentration levels. Two separate sets of pot experiment were carried out for these two heavy metals with graded levels of application doses of Pb at 0.4–150 mg/kg and Cd at 0.02–20 mg/kg to an acidic light textured alluvial soil. Spinach crop was grown for 50 days on these treated soils after a stabilization period of 2 months. Upper limit of background concentration levels (C _ul) of these metals were calculated through statistical approach from the heavy metals concentration values in leaves of spinach crop grown in farmers’ fields. Lead and Cd concentration limits in soil were calculated by dividing C _ul with uptake response slope obtained from the pot experiment. Cumulative loading limits (concentration limits in soil minus contents in uncontaminated soil) for the experimental soil were estimated to be 170 kg Pb/ha and 0.8 kg Cd/ha. Based on certain assumptions on application rate and computed cumulative loading limit values, maximum permissible Pb and Cd concentration values in municipal solid waste (MSW) compost were proposed as 170 mg Pb/kg and 0.8 mg Cd/kg, respectively. In view of these limiting values, about 56% and 47% of the MSW compost samples from different cities are found to contain Pb and Cd in the safe range.