Twenty five years of industrial development: a study of resource use rates and macro-efficiency indicators for five Asian countries

Economic and population growth in Asia over the last three decades has been unprecedented. While conventional economic indicators have been increasing consistently, indicators of resource and environmental quality have been deteriorating, raising questions about the implications of future growth. Economic growth in the future is considered to be contingent on ensuring a more efficient use of natural resources, while simultaneously striving to reduce environmental impacts. We examine time trends of three efficiency indicators; agricultural efficiency, energy efficiency of economic production and carbon efficiency of energy use, for the five most populous countries in Asia in order to assess whether industrial development has lead to increased resource use efficiency and an associated reduction in total resource use and environmental impacts. Our results indicate that agricultural efficiency has decreased in all five countries. Results are mixed for energy and carbon efficiencies. Where increases in energy and carbon efficiency have occurred, they have been completely overwhelmed by absolute increases in energy use and carbon emissions caused by increases in the scale of economic activity. Based on this analysis, we study the potential for further improvements and policy implications for future food supply, energy consumption and carbon emissions in the region.     

The effects of dieldrin, dimethoate and permethrin on Tetrahymena pyriformis

The effects of three insecticides, dieldrin, dimethoate and permethrin, on the growth of a holotrichous ciliate, Tetrahymena pyriformis, were studied for 5 days. The ciliate was very sensitive to dieldrin and dimethoate. Both these insecticides produced approximately 81% and 84% inhibition of growth within two days. Dieldrin caused rounding of cells, while dimethoate induced cell lysis. Dimethoate also triggered a general mucocyst discharge. Of the three insecticides, permethrin was the least toxic and induced no morphological alterations.     

Heavy metal content in soil reclaimed from a municipal solid waste landfill

Residues reclaimed from a municipal solid waste (MSW) landfill were characterized for the concentrations of a number of heavy metals. The residue fractions analyzed included a fine fraction (<0.425 mm), an intermediate fraction (>0.425 and <6.3 mm) and a fraction consisting of paper products that could ultimately degrade to a smaller size. The intermediate fraction appeared to be organic in nature, while the fine fraction was more soil-like. In general, the metal concentrations were greatest in the intermediate fraction and lowest in the fine fraction. The effect of sample age on the elemental content was also investigated. The concentrations of several elements were greater in older samples (sample approximately 8 years in age) when compared to newer samples (sample approximately 3 years in age). Limitations associated with the land application of residual soil (composed of the fine and intermediate fractions) were assessed by comparing measured concentrations to regulatory threshold values. In general, most metal concentrations were below regulatory thresholds for use in unrestricted settings. At the concentrations measured, however, several elements might limit reuse options, depending on which regulatory threshold serves as a benchmark. Elevated concentrations of arsenic presented the greatest limitation with respect to common US thresholds while elevated cadmium concentrations presented the greatest limitation when compared to UK thresholds. The source of the arsenic was determined to be the waste, not the cover soil.     

Steady-state design of horizontal systems for liquids addition at bioreactor landfills

The key parameters for designing a horizontal source (horizontal trenches, infiltration ponds, infiltration galleries or blankets) for steady state are the rate liquids can be added to the source, the lateral and vertical extents of the zone of impact of the source, and the liquids volume needed to wet the waste within the zone of impact at steady state. This paper presents charts that a designer can use to estimate these key parameters as functions of source dimensions, injection pressure, and municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy) for designing a new or analyzing an existing horizontal source system for liquids addition to landfilled waste. SEEP/W was used to model liquids flow from a horizontal source in a range of conditions practically encountered for such systems. The governing equation (Richard’s equation) and the boundary conditions were analyzed to formulate dimensionless variables by normalizing the design parameters (flow rate, injection pressure, the lateral zone of impact, injection pressure, and the added liquids volume) with the waste properties and source dimensions. The simulation results were transformed to the respective dimensionless forms and presented in design charts to estimate the key design parameters as functions of the source dimensions, waste properties, and injection pressure. The presentation of the modeling results in the dimensionless form facilitates their use beyond the conditions modeled. A solved example is presented to demonstrate the use of the design charts. The approach presented in the paper should be considered as approximate and designers should use their judgement and experience when using these charts for designing a horizontal liquids addition system for a specific site.     

Aspergillus niger as a new allergic agent associated with bindis and its efficacy against homeopathic drugs

Aspergillus was found as a dominant fungi to associate with brands of bindis. Among three potencies of four homeopathic drugs, Lycopodium 1M, Sulphur 1M, and Sepia 30 showed maximum inhibition zone of Aspergillus niger in inhibition zone technique. In poison food technique, Sepia 30M, Tellurium 30M, Sulphur 1M and Lycopodium 200 showed maximum percentage inhibition against A. niger     

Carnivore-Caused Livestock Mortality in Trans-Himalaya

The loss of livestock to wild predators is an important livelihood concern among Trans-Himalayan pastoralists. Because of the remoteness and inaccessibility of the region, few studies have been carried out to quantify livestock depredation by wild predators. In the present study, we assessed the intensity of livestock depredation by snow leopard Uncia uncia, Tibetan wolf Canis lupus chanku, and Eurasian lynx Lynx l. isabellina in three villages, namely Gya, Rumtse, and Sasoma, within the proposed Gya-Miru Wildlife Sanctuary in Ladakh, India. The three villages reported losses of 295 animals to these carnivores during a period of 2.5 years ending in early 2003, which represents an annual loss rate of 2.9% of their livestock holdings. The Tibetan wolf was the most important predator, accounting for 60% of the total livestock loss because of predation, followed by snow leopard (38%) and lynx (2%). Domestic goat was the major victim (32%), followed by sheep (30%), yak (15%), and horse (13%). Wolves killed horses significantly more and goats less than would be expected from their relative abundance. Snow leopards also killed horses significantly more than expected, whereas they killed other livestock types in proportion to their abundance. The three villages combined incurred an estimated annual monetary loss of approximately $USD 12,120 amounting to approximately $USD 190/household/y. This relatively high total annual loss occurred primarily because of depredation of the most valuable livestock types such as yak and horse. Conservation actions should initially attempt to target decrease of predation on these large and valuable livestock species.     

Spatio-temporal assessment of ambient air quality,their health effects and improvement during COVID-19 lockdown in one of the most polluted cities of India

Environmental Science and Pollution Research - The present work aims to investigate seasonal variations in air pollution levels in Lucknow and assess the ambient air quality of the city together...     

Transient design of landfill liquid addition systems

This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al., 2010a, Jain et al., 2010b. The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.     

Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching--a response surface modeling approach

The global crisis of the hazardous electronic waste (E-waste) is on the rise due to increasing usage and disposal of electronic devices. A process was developed to treat E-waste in an environmentally benign process. The process consisted of thermal plasma treatment followed by recovery of metal values through mineral acid leaching. In the thermal process, the E-waste was melted to recover the metal values as a metallic mixture. The metallic mixture was subjected to acid leaching in presence of depolarizer. The leached liquor mainly contained copper as the other elements like Al and Fe were mostly in alloy form as per the XRD and phase diagram studies. Response surface model was used to optimize the conditions for leaching. More than 90% leaching efficiency at room temperature was observed for Cu, Ni and Co with HCl as the solvent, whereas Fe and Al showed less than 40% efficiency.