Enhanced visual detection of pesticides using gold nanoparticles

The presence of parts per billion (ppb) levels of chlorpyrifos (O,O-Diethyl-O-(3,5,6-trichloro-2-pyridyl) phosphorothioate) and malathion (S-1,2-bis(ethoxycarbonyl) ethyl O,O-dimethyl phosphorodithioate), two common pesticides found in the surface waters of developing countries, have been visually detected using gold nanoparticles. Visual detection of the presence of pesticide is possible when the color change occurring by the adsorption of pesticides on gold nanoparticles is enhanced by sodium sulfate. The method presented here is simple and there is no need of sample preparation or preconcentration. The response occurs within seconds and the color change is very clear. The detection is possible if chlorpyrifos and malathion are present up to a concentration of 20 and 100 ppb, respectively. The method shows great potential for on-site pesticide monitoring. The method is also applicable as a qualitative technique for the performance evaluation of various household water filters, which claim pesticide removal.     

Study of the Relationship of Distant SO2 Emissions to Dallas-Fort Worth Winter Haze

ABSTRACT

A study was conducted to estimate the changes in wintertime visual air quality in Dallas-Fort Worth (DFW) that might occur due to proposed reductions in SO₂ emissions at two steam electric generating plants in eastern Texas, each over 100 km from the city. To provide information for designing subsequent investigations, the haze was characterized broadly during the first year of the study. Meteorological data acquired then demonstrated that, during haze episodes, emissions from only one of the two plants were likely to be transported directly to DFW. Therefore, the second year of the study was centered on just one of the power plants. Air quality was then characterized within the urban area and at rural locations that would be upwind and downwind of the plant during transport to DFW. An instrumented aircraft measured plume dispersion and the air surrounding the plume on selected days. A mathematical model was used to predict the change that would occur in airborne particulate matter concentrations in DFW if SO₂ emissions were reduced to reflect the proposed limitations. The contribution of particles in the atmosphere to light extinction was estimated, and simulated photographs were produced to illustrate the visibility changes. The study concluded that the proposed emission reductions would, at most, subtly change perceived wintertime visibility.     

Modeling of Potential Power Plant Plume Impacts on Dallas-Fort Worth Visibility

ABSTRACT

During wintertime, haze episodes occur in the Dallas-Ft. Worth (DFW) urban area. Such episodes are characterized by substantial light scattering by particles and relatively low absorption, leading to so-called “white haze.” The objective of this work was to assess whether reductions in the emissions of SO₂ from specific coal-fired power plants located over 100 km from DFW could lead to a discernible change in the DFW white haze. To that end, the transport, dispersion, deposition, and chemistry of the plume of a major power plant were simulated using a reactive plume model (ROME). The realism of the plume model simulations was tested by comparing model calculations of plume concentrations with aircraft data of SF₆ tracer concentrations and ozone concentrations. A second-order closure dispersion algorithm was shown to perform better than a first-order closure algorithm and the empirical Pasquill-Gifford-Turner algorithm. For plume impact assessment, three actual scenarios were simulated, two with clear-sky conditions and one with the presence of fog prior to the haze. The largest amount of sulfate formation was obtained for the fog episode. Therefore, a hypothetical scenario was constructed using the meteorological conditions of the fog episode with input data values adjusted to be more conducive to sulfate formation. The results of the simulations suggest that reductions in the power plant emissions lead to less than proportional reductions in sulfate concentrations in DFW for the fog scenario. Calculations of the associated effects on light scattering using Mie theory suggest that reduction in total (plume + ambient) light extinction of less than 13% would be obtained with a 44% reduction in emissions of SO₂ from the modeled power plant.     

Nickel accumulation and its effect on growth,physiological and biochemical parameters in millets and oats

With the boom in industrialization, there is an increase in the level of heavy metals in the soil which drastically affect the growth and development of plants. Nickel is an essential micronutrient for plant growth and development, but elevated level of Ni causes stunted growth, chlorosis, nutrient imbalance, and alterations in the defense mechanism of plants in terms of accumulation of osmolytes or change in enzyme activities like guiacol peroxidase (POD), catalase (CAT), and superoxide dismutase (SOD). Ni-induced toxic response was studied in seedlings of finger millet, pearl millet, and oats in terms of seedling growth, lipid peroxidation, total chlorophyll, proline content, and enzymatic activities. On the basis of germination and growth parameters of the seedling, finger millet was found to be the most tolerant. Nickel accumulation was markedly lower in the shoots as compared to the roots, which was the highest in finger millet and the lowest in shoots of oats. Plants treated with a high concentration of Ni showed significant reduction in chlorophyll and increase in proline content. Considerable difference in level of malondialdehyde (MDA) content and activity of antioxidative enzymes indicates generation of redox imbalance in plants due to Ni-induced stress. Elevated activities of POD and SOD were observed with high concentrations of Ni while CAT activity was found to be reduced. It was observed that finger millet has higher capability to maintain homeostasis by keeping the balance between accumulation and ROS scavenging system than pearl millet and oats. The data provide insight into the physiological and biochemical changes in plants adapted to survive in Ni-rich environment. This study will help in selecting the more suitable crop species to be grown on Ni-rich soils.

     

Impact of urbanization on the groundwater regime in a fast growing city in central India

This paper describes the impact of urbanization on the groundwater regime in a fast growing city, Solapur, in central India, giving special emphasis on the management of the present and ultimate demand of water in 2,020 AD. The objective is to apprise the city planners and administrators of the effects of urbanization on the groundwater regime in a fast growing medium-sized city in a developing country where the infrastructure developments are not in conformity with the rapid growth in population. Solapur city with an area of 178.57 km2 receives a recharge of about 24 million m3 of groundwater from various sources annually. Reduction in recharge, as conventionally assumed due to the impact of urbanization, could not, however, be well established. Instead, there was a rise in recharge as water use in the city grew from time to time and more and more water was supplied to satisfy the human needs. Compared to mid-1970s, groundwater levels have increased within the main city area due to increased recharge and decreased groundwater abstraction. However, outside the main city area, there is a general decline in groundwater levels due to increased groundwater utilization for irrigation purposes. Groundwater quality deterioration has been highly localized. Water quality has deteriorated during the last 10 years, especially in dugwells, mainly due to misuse and disuse of these structures and poor circulation of groundwater. However, in case of borewells, comparison of the present water quality with that in mid-1970s and early 1980s does not show any perceptible change. Deeper groundwater tapped by borewells can still be used for drinking purposes with caution.     

Perceived Conflicts Between Pastoralism and Conservation of the Kiang Equus kiang in the Ladakh Trans-Himalaya, India

An emerging conflict with Trans-Himalayan pastoral communities in Ladakh’s Changthang Plateau threatens the conservation prospects of the kiang (Equus kiang) in India. It is locally believed that Changthang’s rangelands are overstocked with kiang, resulting in forage competition with livestock. Here, we provide a review and preliminary data on the causes of this conflict. Erosion of people’s tolerance of the kiang can be attributed to factors such as the loss of traditional pastures during an Indo-Chinese war fought in 1962, immigration of refugees from Tibet, doubling of the livestock population in about 20 years, and increasing commercialization of cashmere (pashmina) production. The perception of kiang overstocking appears misplaced, because our range-wide density estimate of 0.24 kiang km⁻² (± 0.44, 95% CL) is comparable to kiang densities reported from Tibet. A catastrophic decline during the war and subsequent recovery of the kiang population apparently led to the overstocking perception in Ladakh. In the Hanle Valley, an important area for the kiang, its density was higher (0.56 km⁻²) although even here, we estimated the total forage consumed by kiang to be only 3–4% compared to 96–97% consumed by the large livestock population (78 km⁻²). Our analysis nevertheless suggests that at a localized scale, some herders do face serious forage competition from kiang in key areas such as moist sedge meadows, and thus management strategies also need to be devised at this scale. In-depth socioeconomic surveys are needed to understand the full extent of the conflicts, and herder-centered participatory resolution needs to be facilitated to ensure that a sustainable solution for livelihoods and kiang conservation is achieved.     

Treatment of low-strength soluble wastewater using an anaerobic baffled reactor (ABR)

Treatment of low-strength soluble wastewater (COD approximately 500 mg/L) was studied using an eight chambered anaerobic baffled reactor (ABR). At pseudo steady-state (PSS), the average total and soluble COD values (COD(T) and COD(S)) at 8h hydraulic retention time (HRT) were found to be around 50 and 40 mg/L, respectively, while at 10h HRT average COD(T) and COD(S) values were of the order of 47 and 37 mg/L, respectively. COD and BOD (3 day, 27 degrees C) removal averaged more than 90%. Effluent conformed to Indian standards laid down for BOD (less than 30 mg/L). Reactor effluent characteristics exhibited very low values of standard deviation indicating excellent reactor stability at PSS in terms of effluent characteristics. Based on mass balance calculations, more than 60% of raw wastewater COD was estimated to be recovered as CH(4) in the gas phase. Compartment-wise profiles indicated that most of the BOD and COD got reduced in the initial compartments only. Sudden drop in pH (7.8-6.7) and formation of volatile fatty acids (VFA) (53-85 mg/L) were observed in the first compartment due to acidogenesis and acetogenesis. The pH increased and VFA concentration decreased longitudinally down the reactor. Residence time distribution (RTD) studies revealed that the flow pattern in the ABR was neither completely plug-flow nor perfectly mixed. Observations from scanning electron micrographs (SEM) suggest that distinct phase separation takes place in an ABR.     

Cold plasma technology: advanced and sustainable approach for wastewater treatment

Environmental Science and Pollution Research - Cold plasma has been a potent energy-efficient and eco-friendly advanced oxidation technology which has gained attention in recent decades as a...     

Steady-state design of vertical wells for liquids addition at bioreactor landfills

The rate at which liquids can be added to a vertical well, the lateral zone of impact of the well, and the liquids volume needed to wet the waste within the zone of impact of the well are the key inputs needed to design a vertical well system. This paper presents design charts that can be used to estimate these inputs as a function of municipal solid waste properties (porosity, hydraulic conductivity, and anisotropy ratio), well dimensions (radius and screen length), and injection pressure. SEEP/W modeling was conducted to estimate the key design inputs for a range of conditions practically encountered for a vertical well installed in landfilled waste. The flow rate, lateral zone of impact of a well, liquids volume added, and injection pressure were normalized with the waste properties and well dimensions to formulate dimensionless variables. A series of design charts were created to present dimensionless steady-state flow rate, lateral zone of impact, and the dimensionless liquid volume needed to reach a steady-state condition, as a function of dimensionless input variables. By using dimensionless variables formulated for this work, these charts permit the user to estimate the steady-state design variables described above for a wide range of configurations and conditions beyond those simulated without the need for further modeling. The results of the study suggest that the lateral extent of the well can be estimated using Darcy’s equation and assuming saturated unit-gradient vertical flow regime below the well bottom. An example problem is presented to illustrate the use of the design charts. The scenario described in the example problem was also modeled with SEEP/W, and the results were compared with those obtained from the design charts to demonstrate the validity of design charts for scenarios other than those used for the development of the design charts. The methodology presented in this paper should be thought of as a means to provide a set of bounds that an engineer can use along with their judgment in the design of a system for a specific site.     

Decolorization of structurally different synthetic dyes using cobalt(II)/ascorbic acid/hydrogen peroxide system

The cobalt(II)/ascorbic acid/hydrogen peroxide system was used for decolorization of azo, acridine, anthraquinone, thiazine and triphenylmethane dyes. More than 90% decolorization was obtained with all dyes except Remazol Brilliant Blue R (75%). With other transition metals the system was less efficient. With copper, higher concentration and prolonged incubation time was necessary to obtain the same extent of decolorization. The rate of decolorizaton was not affected by pH in the range of 3-9. The reaction is very fast, with more than 90% decolorization being attained within 15 min. The system produces hydroxyl radicals which are responsible for the decolorization.