Heavy metal pollution abatement using rock phosphate mineral

The low-grade rock phosphate of Jhabua, Madhya Pradesh (India), was investigated for its possible application in the removal of lead, copper, zinc and cobalt ions from aqueous solutions. Effects of contact time, amount of adsorbent and initial concentration of metal ions were studied. Adsorption of heavy metal ions was found to follow the order: Pb2+ > Cu2+ > Zn2+ > Co2+. The probable mechanism of metal ions removal by rock phosphate was found to be by its dissolutions followed by subsequent precipitation.     

Detection and extraction of endosulfan by metal nanoparticles

One of the most common pesticides in the developing world, endosulfan, can be detected in ppm levels using gold nanoparticles. Endosulfan adsorbs on the nanoparticle surface and upon interaction for a long time, the nanoparticles precipitate from the solution. Interaction with silver is weak, yet adsorption occurs leading to removal of endosulfan from the solution. A multilayer assembly of gold nanoparticles prepared on a glass substrate shows excellent spectrophotometric response suggesting potential applications.     

DYNAMIC FLUID LOSS DURING VISCOUS FLOW THROUGH A POROUS VERTICAL SLOT1

ABSTRACT. An experimental study of two-dimensional viscous flow through a vertical slot with one highly resistant porous wall was made. The fluid loss area of the porous wall was divided into five sections. The fluid loss rate for the various subareas was measured as a function of the bulk flow rate through the slot and the viscosity of the fluid. Static flow tests through the porous media were also conducted for each fluid viscosity. The results indicate that the experimental data can be correlated in terms of the difference between the static flow rate and the dynamic fluid loss rate as a function of the bulk Reynold's number and the bulk flow rate. Stream function profiles were determined for each experimental run to visualize flow through the length of the slot. An empirical correlation was developed between the superficial entrance width, δ, and the ratio of bulk Reynold's number to the Reynold's number based on flow through the porous wall.     

Effect of trypanosomes infection on blood ascorbic acid and serum aldolase levels on the fresh water fishes, Clarias batrachus and Heteropneustus fossilis

The trypanosomes presence has been found to decrease blood ascorbic acid levels in fishes, Clarias batrachus and Heteropneustus fossilis by 55.7% and 54.70% respectively. The infection also showed significant increase in serum aldolase level of three fishes by 50.19% and 48.06% respectively.     

Cybil induced hepatobiochemical changes in wistar rats

Cybil, 25%EC formulation of Cypermethrin, induces biochemical changes in the liver of wistar rats after oral intubation of the same at acute (one day) and subacute (7, 14 and 21 days) levels. The changes were tallied with the controls run simultaneously. LD50 of Cybil was estimated to be 622mg/kg body weight The acute dose is 80mg/kg body weight exposed for one day i.e. 24 hours and subacute dose is 4mg/kg body weight exposed for 7, 14 and 21 days. When compared with the control values, both the doses enhanced the level of glycogen, cholesterol, total lipid and acid phosphatase activities, while decreased activity of alkaline phosphatase. Alterations in glycogen, cholesterol, total lipid, acid phosphatase and alkaline phosphatase resulted in the impairement in liver physiology.     

Comparative studies on accumulation of Cr from metal solution and tannery effluent under repeated metal exposure by aquatic plants: its toxic effects

The present study demonstrates comparison of Cr accumulatingpotential by the plants of Najas indica Cham. (submerged),Vallisneria spiralis L. (rooted submerged) and Alternanthera sessilis R. Br. (rooted emergent) under repeatedmetal exposure and its effect on chlorophyll and protein concentrations. These plants were treated with different concentrations of Cr under repeated exposure in controlled laboratory conditions to assess the maximum metal accumulationpotential. The plants of V. spiralis accumulated significantly high amount of Cr under laboratory conditions incomparison to N. indica and A. sessilis. The maximumaccumulation of 1378, 458 and 201 g g^-1 dw Cr was found in the leaves of V. spiralis, N. indica and A. sessilis, respectively at 8 mg L^-1 after 9 day of Cr exposure. These plants have shown a decrease in chlorophyll andprotein concentrations with increase in Cr concentrations. In view of high accumulation of Cr in V. spiralis, the plantswere treated with different concentrations of tannery effluent collected from Common Effluent Treatment Plant, Unnao (UP). Theplants of V. spiralis treated with 100% tannery wastewatershowed the maximum accumulation (57.5 g g^-1 dw) of Cr in the roots after 10 days of exposure. The plants were foundeffective in removing Cr from solution and tannery effluent.     

Chromium induced lipid peroxidation in the plants of Pistia stratiotes L.: role of antioxidants and antioxidant enzymes

In the plant, Pistia stratiotes L., the effect of different concentrations of chromium (0, 10, 40, 80 and 160 microM) applied for 48, 96 and 144 h was assessed by measuring changes in the chlorophyll, protein, malondialdehyde (MDA), cysteine, non-protein thiol, ascorbic acid contents and superoxide dismutase (SOD), ascorbate peroxidase (APX) and guiacol peroxidase (GPX) activity of the plants. Both in roots and leaves, an increase in MDA content was observed with increase in metal concentration and exposure periods. In roots, the activity of antioxidant enzymes viz. SOD and APX increased at all the concentrations of Cr at 144 h than their controls. The GPX activity of the treated roots increased with increase in Cr concentration at 48 and 96 h of exposures, however, at 144 h its activity was found declined beyond 10 microM Cr. The level of antioxidants in the roots of the treated plant viz. cysteine and ascorbic acid was also found increased at all the concentrations of Cr at 144 h than their respective controls, however, an increase in the non-protein thiol content was recorded up to 40 microM Cr followed by decrease. The chlorophyll content decreased with increase in Cr concentrations and exposure periods. However, the protein content of both roots and leaves were found decreased with increase in Cr concentrations at all the exposure periods except an increase was recorded at 10 microM Cr at 48 h. In Cr treated plants, the no observed effect concentration (NOEC) and lowest observed effect concentration (LOEC) for leaves chlorophyll and protein contents were 40 and 80 microM Cr, respectively after 48 h exposure while NOEC and LOEC for root protein content were 10 and 40 microM, respectively after 48 h. The analysis of correlation coefficient data revealed that the metal accumulation in the roots of the plant was found positively correlated with antioxidant parameters except SOD after 48 h of exposure, however, negatively correlated with most of all the parameters studied at 144 h in both part of the plant. It may be suggested from the present study that toxic concentrations of Cr cause oxidative damage as evidenced by increased lipid peroxidation and decreased chlorophyll and protein contents. However, the higher levels of enzymatic and non-enzymatic antioxidants suggest the reason for tolerating higher levels of metals.     

Experimental investigation of turning AISI 1045 steel using cryogenic carbon dioxide as the cutting fluid

The intensive temperatures in high speed machining not only limit the tool life but also impair the machined surface by inducing tensile residual stresses, microcracks and thermal damage. This problem can be handled largely by reducing the cutting temperature. When the conventional coolant is applied to the cutting zone, it fails to remove the extent of the heat effectively. Hence, a cryogenic coolant is highly recommended for this purpose. In this paper, an attempt has been made to use cryogenic carbon dioxide (CO₂) as the cutting fluid. Experimental investigations are carried out by turning AISI 1045 steel in which the efficiency of cryogenic CO₂ is compared to that of dry and wet machining with respect to cutting temperature, cutting forces, chip disposal and surface roughness. The experimental results show that the application of cryogenic CO₂ as the cutting fluid is an efficient coolant for the turning operation as it reduced the cutting temperature by 5%–22% when compared with conventional machining.It is also observed that the surface finish is improved to an appreciable amount in the finished work piece on the application of cryogenic CO₂. The surface finish is improved by 5%–25% in the cryogenic condition compared with wet machining.