The impact of gasoline emission on plants – a review

This review presents the status of knowledge about gasoline exhaust pollution and its impact biochemical and physiological characteristics of plants. Parameters on such as leaf conductance, membrane permeability, ascorbic acid, chlorophyll and relative water content have been used as indicators to assess the impact of gasoline exhaust pollution on plant health. Tolerant plants such as Mangifera indica Linn. are reported showing an insignificant decrease in the percentage of chlorophyll content (3.6%) and a significant increase in the percentage of ascorbic acid (84.6%) and sensitive plants such as Cassia fistula are reported showing a significant decrease in the percentage of chlorophyll (66.4%) as well as ascorbic acid (32.9%). In the case of ornamental plants, Dracaena deremensis has been reported to show an insignificant decrease in the chlorophyll content but a significant increase in the ascorbic acid, pH and relative water content, which were found to be in tolerant category, while Dianthus caryophyllus showed sensitive characteristics. Such plants can be used as sinks and bioindicators for gasoline exhaust pollution. Though several studies reported biochemical impacts of individual or combined exhaust gases on plant species, the cumulative effect of gasoline exhaust on plant species has not been studied extensively, especially in the developing countries.     

A study on mountain front recharge by using integrated techniques in the hard rock aquifers of southern India

Mountain front recharge (MFR) is the contribution of mountains to recharge the aquifers in the adjacent basins. The estimation of MFR is essential to obtain a detailed investigation of recharge of the groundwater at the mountain front. This study summarises the current understanding of recharge processes by comparing daily groundwater fluctuation to daily rainfall and identifies the recharge rates. The recharge rates vary with time due to difference in water table depth and travel time. Thus to understand the MFR along the foothills of Courtallam, a total of 14 surface water, rainwater and groundwater samples were collected and measured for stable isotopes. The isotopic data were used to investigate the recharge process and to identify the elevations to recharge. The study findings also suggest that predominantly rainfall along the foothills contributes recharge to the riparian zone (basin block region), whereas foothill regions receive recharge from rainfall over mountain block.     

Chemical characteristics and source apportionment of PM<Subscript>2.5</Subscript> using PCA/APCS,UNMIX, and PMF at an urban site of Delhi,India

The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM_2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM_2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM_2.5 was recorded as 121.9 ± 93.2 μg m^?3 (range 25.1–429.8 μg m^?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM_2.5. Strong seasonal variation was observed in PM_2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM_2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM_2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM_2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM_2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM_2.5 from the north-west India and Pakistan were mostly pertinent.     

Biodegradation of C.I. Acid Red 1 by indigenous bacteria <Emphasis Type="Italic">Stenotrophomonas</Emphasis> sp. BHUSSp X2 isolated from dye contaminated soil

A significant proportion of xenobiotic recalcitrant azo dyes are being released in environment during carpet dyeing. The bacterial strain Stenotrophomonas sp. BHUSSp X2 was isolated from dye contaminated soil of carpet industry, Bhadohi, India. The isolated bacterial strain was identified morphologically, biochemically, and on the basis of 16S rRNA gene sequence. The isolate decolorized 97 % of C.I. Acid Red 1 (Acid RED G) at the concentration of 200 mg/l within 6 h under optimum static conditions (temperature ?35 °C, pH 8, and initial cell concentration 7?×?10⁷ cell/ml). Drastic reduction in dye degradation rate was observed beyond initial dye concentration from 500 mg/l (90 %), and it reaches to 25 % at 1000 mg/l under same set of conditions. The analysis related to decolorization and degradation was done using UV-Vis spectrophotometer, HPLC, and FTIR, whereas the GC-MS technique was utilized for the identification of degradation products. Phytotoxicity analysis revealed that degradation products are less toxic as compared to the original dye.     

Mass balance of anionic surfactants through up-flow anaerobic sludge blanket based sewage treatment plants

The outcome of a 21-month monitoring study on anionic surfactants (AS) at five (27–70 ML/d) up-flow anaerobic sludge blanket (UASB) based sewage treatment plants (STPs) is described. The average removals of AS were around 8–30%. Appreciable concentrations of AS were being discharged to the watercourse (average 4.30 mg/L; range 3.60–4.91 mg/L). On an average dried sludge contained 1452 mg AS/kg dry weight. Mass balance at three STPs indicated that, AS load of the order of 5–17% and ≈12% is removed by adsorption in UASB reactors and polishing ponds (PP) respectively. Biodegradation of AS under anaerobic conditions in UASB reactors and PP does not seem to take place. In the sludge stream, appreciable biodegradation (≈46%) of adsorbed AS under aerobic conditions on the sludge drying beds takes place. If influent AS mass flux is normalized to 100 units, than average of ≈74 and ≈7 units are discharged with treated effluent and dried sludge respectively, while 12 and 6 units are adsorbed/settled in PP and aerobically biodegrade on sludge drying beds respectively. At two STPs (34 and 56 ML/d), the filterable fluxes in UASBR increased so that the mass balance could not be computed.     

Acetamide hydrolyzing activity of Bacillus megaterium F-8 with bioremediation potential: Optimization of production and reaction conditions.

Bacillus megaterium F-8 exhibited an intracellular acetamide hydrolyzing activity (AHA) when cultivated in modified nutrient broth with 3 % tryptone, 1.5 % yeast extract, and 0.5 % sodium chloride, at pH 7.2, 45 °C for 24 h. Maximum AHA was recorded in the culture containing 0.1 M of sodium phosphate buffer, (pH 7.5) at 45 °C for 20 min with 0.2 % of acetonitrile and resting cells of B. megaterium F-8 equivalent to 0.2 ml culture broth. This activity was stable up to 55 °C and was completely inactivated at or above 60 °C. Maximum acyl transferase activity (ATA) was recorded in the reaction medium containing 0.1 M of potassium phosphate buffer, (pH 8.0) at 55 °C for 5 min with 0.85 mM of acetamide as acyl donor and hydroxylamine hydrochloride as acyl acceptor and resting cells of B. megaterium F-8 equivalent to 0.94 mg cells (dry weight basis). This activity was stable up to 60 °C and a rapid decline in enzyme activity was recorded above it. Under the optimized conditions, this organism hydrolyzed various nitriles and amides such as propionitrile, propionamide, caprolactam, acetamide, and acrylamide to corresponding acids. Acyl group transfer capability of this organism was used for the production of acetohydroxamic acid. ATA of B. megaterium F-8 showed broad substrate specificity such as for acetamide followed by propionamide, acrylamide, and lactamide. This amide hydrolyzing and amidotransferase activity of B. megaterium F-8 has potential applications in enzymatic synthesis of hydroxamic acids and bioremediation of nitriles and amides contaminated soil and water system.     

Enhanced visual detection of pesticides using gold nanoparticles

The presence of parts per billion (ppb) levels of chlorpyrifos (O,O-Diethyl-O-(3,5,6-trichloro-2-pyridyl) phosphorothioate) and malathion (S-1,2-bis(ethoxycarbonyl) ethyl O,O-dimethyl phosphorodithioate), two common pesticides found in the surface waters of developing countries, have been visually detected using gold nanoparticles. Visual detection of the presence of pesticide is possible when the color change occurring by the adsorption of pesticides on gold nanoparticles is enhanced by sodium sulfate. The method presented here is simple and there is no need of sample preparation or preconcentration. The response occurs within seconds and the color change is very clear. The detection is possible if chlorpyrifos and malathion are present up to a concentration of 20 and 100 ppb, respectively. The method shows great potential for on-site pesticide monitoring. The method is also applicable as a qualitative technique for the performance evaluation of various household water filters, which claim pesticide removal.     

Study of the Relationship of Distant SO2 Emissions to Dallas-Fort Worth Winter Haze

ABSTRACT

A study was conducted to estimate the changes in wintertime visual air quality in Dallas-Fort Worth (DFW) that might occur due to proposed reductions in SO₂ emissions at two steam electric generating plants in eastern Texas, each over 100 km from the city. To provide information for designing subsequent investigations, the haze was characterized broadly during the first year of the study. Meteorological data acquired then demonstrated that, during haze episodes, emissions from only one of the two plants were likely to be transported directly to DFW. Therefore, the second year of the study was centered on just one of the power plants. Air quality was then characterized within the urban area and at rural locations that would be upwind and downwind of the plant during transport to DFW. An instrumented aircraft measured plume dispersion and the air surrounding the plume on selected days. A mathematical model was used to predict the change that would occur in airborne particulate matter concentrations in DFW if SO₂ emissions were reduced to reflect the proposed limitations. The contribution of particles in the atmosphere to light extinction was estimated, and simulated photographs were produced to illustrate the visibility changes. The study concluded that the proposed emission reductions would, at most, subtly change perceived wintertime visibility.     

Modeling of Potential Power Plant Plume Impacts on Dallas-Fort Worth Visibility

ABSTRACT

During wintertime, haze episodes occur in the Dallas-Ft. Worth (DFW) urban area. Such episodes are characterized by substantial light scattering by particles and relatively low absorption, leading to so-called “white haze.” The objective of this work was to assess whether reductions in the emissions of SO₂ from specific coal-fired power plants located over 100 km from DFW could lead to a discernible change in the DFW white haze. To that end, the transport, dispersion, deposition, and chemistry of the plume of a major power plant were simulated using a reactive plume model (ROME). The realism of the plume model simulations was tested by comparing model calculations of plume concentrations with aircraft data of SF₆ tracer concentrations and ozone concentrations. A second-order closure dispersion algorithm was shown to perform better than a first-order closure algorithm and the empirical Pasquill-Gifford-Turner algorithm. For plume impact assessment, three actual scenarios were simulated, two with clear-sky conditions and one with the presence of fog prior to the haze. The largest amount of sulfate formation was obtained for the fog episode. Therefore, a hypothetical scenario was constructed using the meteorological conditions of the fog episode with input data values adjusted to be more conducive to sulfate formation. The results of the simulations suggest that reductions in the power plant emissions lead to less than proportional reductions in sulfate concentrations in DFW for the fog scenario. Calculations of the associated effects on light scattering using Mie theory suggest that reduction in total (plume + ambient) light extinction of less than 13% would be obtained with a 44% reduction in emissions of SO₂ from the modeled power plant.     

Nickel accumulation and its effect on growth,physiological and biochemical parameters in millets and oats

With the boom in industrialization, there is an increase in the level of heavy metals in the soil which drastically affect the growth and development of plants. Nickel is an essential micronutrient for plant growth and development, but elevated level of Ni causes stunted growth, chlorosis, nutrient imbalance, and alterations in the defense mechanism of plants in terms of accumulation of osmolytes or change in enzyme activities like guiacol peroxidase (POD), catalase (CAT), and superoxide dismutase (SOD). Ni-induced toxic response was studied in seedlings of finger millet, pearl millet, and oats in terms of seedling growth, lipid peroxidation, total chlorophyll, proline content, and enzymatic activities. On the basis of germination and growth parameters of the seedling, finger millet was found to be the most tolerant. Nickel accumulation was markedly lower in the shoots as compared to the roots, which was the highest in finger millet and the lowest in shoots of oats. Plants treated with a high concentration of Ni showed significant reduction in chlorophyll and increase in proline content. Considerable difference in level of malondialdehyde (MDA) content and activity of antioxidative enzymes indicates generation of redox imbalance in plants due to Ni-induced stress. Elevated activities of POD and SOD were observed with high concentrations of Ni while CAT activity was found to be reduced. It was observed that finger millet has higher capability to maintain homeostasis by keeping the balance between accumulation and ROS scavenging system than pearl millet and oats. The data provide insight into the physiological and biochemical changes in plants adapted to survive in Ni-rich environment. This study will help in selecting the more suitable crop species to be grown on Ni-rich soils.