Metabolism of aceclofenac in cattle to vulture‐killing diclofenac

The nonsteroidal anti‐inflammatory drug (NSAID) diclofenac is highly toxic to Gyps vultures, and its recent widespread use in South Asia caused catastrophic declines in at least 3 scavenging raptors. The manufacture of veterinary formulations of diclofenac has since been banned across the region with mixed success. However, at least 12 other NSAIDs are available for veterinary use in South Asia. Aceclofenac is one of these compounds, and it is known to metabolize into diclofenac in some mammal species. The metabolic pathway of aceclofenac in cattle, the primary food of vultures in South Asia, is unknown. We gave 6 cattle the recommended dose of aceclofenac (2 mg/kg), collected blood thereafter at intervals for up to 12 h, and used liquid chromatography with mass spectrometry in a pharmacokinetic analysis of aceclofenac and diclofenac in the plasma. Nearly all the aceclofenac administered to the cattle was very rapidly metabolized into diclofenac. At 2 h, half the aceclofenac had been converted into diclofenac, and at 12 h four‐fifths of the aceclofenac had been converted into diclofenac. Therefore, administering aceclofenac to livestock poses the same risk to vultures as administering diclofenac to livestock. This, coupled with the risk that aceclofenac may replace diclofenac in the veterinary market, points to the need for an immediate ban on all aceclofenac formulations that can be used to treat livestock. Without such a ban, the recovery of vultures across South Asia will not be successful.     

Effect of sewage water on the growth and yield parameters of wheat and blackgram with different fertilizer levels

Impact of biologically treated domestic sewage water was studied on the growth and yield attributing characters of wheat and blackgram under different fertilizer levels in the field condition. There was no significant difference on the yield and yield attributing characters of wheat. However, yield attributing characters like number of tillers/plant, panicle length (cm), number of grains/panicle and 1,000 grain weight showed increasing trend to the tune of 13.29, 1.59. 5.49 and 3.79 per cent respectively over the tubewell irrigated crop. Yield was also increased to the tune of 3.63 per cent when the crop was irrigated with sewage water. Interactions between irrigation and fertilizer levels were also insignificant. However, sewage water with N60P45K45 responded better on tillering, panicle length, number of grains/panicle and yield of wheat. In case of blackgram, treated sewage water had no significant effect on the grwoth and yield attributing characters, rather sewage water had some negative effect on these parameters. Interactions between irrigation and fertilizer levels were insignificant. But tubewell irrigation with N10P10K10 was more responsive on growth parameters. When the crop was grown with tubewell irrigation and without fertilizer, yield attributing characters were more positively responded.     

Bioccumulation and toxicity of Cu and Cd in Vallisneria spiralis (L.)

Accumulation of Cu and Cd by Vallisneria spiralis was studied under laboratory conditions. Plants showed ability to reduce 5 µg ml^–1 Cu background concentration to below 0.05 µg ml^–1 (m.p.l., WHO 1985) within 48 h. The Cd concentration of 1.0 µg ml^–1 was reduced to below m.p.l. (0.005 µg ml^–1) in 168 h. Cysteine synthesis was more under Cd stress condition. Both the metals were toxic to the plants at higher concentrations; more in the case of Cd.NBRI Rsearch Publication No. 417 (N.S.).     

Bricks as historical record of heavy metals fallout: Study on copper accumulation in Agra soils since 1910

Peat, ice deposits and aquatic sediments, which have been used as a geochemical monitor of atmospheric heavy metal pollution until now, are open and dynamic systems and can be easily affected by climatic variations. In contrast, bricks, which are more compact, can act as a better geochemical monitor. Analysis of Cu, Cr, Ni, Pb and Zn in scores of soil and brick (baked/unbaked) samples, collected from a large area in and around a rapidly growing Indian city, Agra, reveals approximately similar concentrations in soils and bricks, thereby showing insignificant fractionation of these metals during brick making. Further, metals concentration in the core of bricks remains unaffected by any significant amount of acidic and alkaline rain. Thus, the feasibility of a novel role of bricks as a geochemical monitor of atmospheric heavy metal pollution has been tested. Utilizing this concept, an attempt has also been made to trace the history of atmospheric copper depositions in the soils of Agra during the last 100 years.     

Physicochemical characterization of hydroxyapatite and its application towards removal of nitrate from water

A laboratory study was conducted to investigate the efficiency of hydroxyapatite (HAP) towards removal of nitrate from synthetic nitrate solution. In the present research HAP synthesized from egg-shell was characterized using SEM, XRD, FTIR and TGA–DSC. The removal of nitrate was 96% under neutral conditions, using 0.3 g of adsorbent in 100 mL of nitrate solution having an initial concentration of 100 mg/L. An adsorption kinetic study revealed that the adsorption process followed first order kinetics. Adsorption data were fitted to a linearly transformed Langmuir isotherm with correlation coefficient (R²) > 0.98. Thermodynamic parameters were also calculated to study the effect of temperature on the removal process. In order to understand the adsorption type, equilibrium data were tested with the Dubinin–Radushkevich isotherm. The process was rapid and equilibrium was established within the first 40 min.     

Forest structure and regeneration along the altitudinal gradient in the Binsar Wildlife Sanctuary,Uttarakhand Himalaya,India

Forest structure and regeneration were studied along the altitudinal gradient in the Binsar Wildlife Sanctuary of Uttarakhand Himalaya in India. Stratified random sampling of tree species was done by placing minimum 15 quadrats of 10 × 10 m at each aspect and altitude. The results reveal that along the altitudinal gradient there were three types of forest communities in the Sanctuary viz., chir pine (Pinus roxburghii), oakchir pine (Quercus leucotrichophora and Pinus roxburghii) and oak (Quercus floribunda and Quercus leucotrichophora). Rhododendron arboreum, Cornus macrophylla and Lyonia ovalifolia were main associates of these forest communities. The oak forests had larger shrub population as compared to chir pine. Myrsine africana was the most dominant shrub across the altitudinal gradient, whereas few shrub species were restricted to a certain altitudinal range. The regeneration of chir pine was best at lower altitude on south and east aspects, which indicates that it mostly regenerates on warm and dry slopes. In general, the regeneration potential in most of the tree species declines with the altitude. The density of saplings and seedlings also represented the dominant species at each altitudinal range, which indicates the cyclic regeneration of forests in the Sanctuary area.     

Water-holding capacity of earthworms’ vermicompost made of sugar industry waste (press mud) in mono- and polyculture vermireactors

Efforts were made to recycle sugar industry waste ‘press mud’ (PM) with an objective to ascertain the water-holding capacities with monoculture vermireactor systems using Eisenia fetida (MVR1); Eudrilus eugeniae (MVR2); Megascolex megascolex (MVR3); and polyculture vermireactor systems using Eisenia fetida + Eudrilus eugeniae (PVR1); Eisenia fetida + Megascolex megascolex (PVR2); Eudrilus eugeniae + Megascolex megascolex (PVR3). The vermicompost harvested after 40 days was subjected to a standard Proctor compaction test by using 3 kg industry soil and 200 g of vermicompost for each cycle of compaction up to seven cycles. The least dry density and highest water content 0.6, 170%; 0.66, 170%; 0.71, 170% and 0.52, 210%; 0.51, 180%; 0.71, 150% for vermicomposts of MVR3, MVR2, MVR1 and PVR3, PVR2, PVR1, respectively. The monoculture reactor using Megascolex megascolex can hold 110–170% and polyculture vermireactor using indigenous Megascolex megascolex + Eudrilus eugeniae (PVR3) can hold 140–210% of water under experimental conditions. The species Megascolex megascolex used individually and in combinations with Eudrilus eugeniae are best suited for biodegradation of press mud, and composts derived are having increase water-holding capacities. The addition of VC to the soil increases water-holding capacity and by maintaining evaporation losses to minimum as good adsorbent of atmospheric moisture eventually helps in maintaining the ecology of hydrologic cycle. Increasing water-holding capacity is one of the soil erosion control measures that influences soil productivity in both managed and natural ecosystems.     

Determination of total arsenic content in water by atomic absorption spectroscopy (AAS) using vapour generation assembly (VGA)

Analysis of arsenic in water is important in view of contamination of ground water with arsenic in some parts of the world including West Bengal in India and neighboring country Bangladesh. WHO has fixed the threshold for arsenic in drinking water to 10ppb (microg/l) level, hence the methodology for determination of arsenic is required to be sensitive at ppb level. Atomic absorption spectrophotometry with vapour generation assembly (AAS-VGA) is well known technique for the trace analysis of arsenic. However, total arsenic analysis [As(III)+As(V)] is very crucial and it requires reduction of As(V) to As(III) for correct analysis. As(III) is reduced to AsH3 vapours and finally to free As atoms, which are responsible for absorption signal in AAS. To accomplish this the vapour generation assembly attached to AAS has acid channel filled with 10 M HCl and the reduction channel with sodium borohydride. Further sample can be reduced either before aspiration for analysis, using potassium iodide (KI) or the sample can be introduced in the instrument directly and KI can be added in the reduction channel along with the sodium borohydride. The present work shows that samples prepared in 3 M HCl can be reduced with KI for 30 min before introduction in the instrument. Alternatively samples can be prepared in 6 M HCl and directly aspirated in AAS using KI in VGA reduction channel. The latter methodology is more useful when the sample size is large and time cycle is difficult to maintain. It is observed that the acid concentration of the sample in both the situations plays an important role. Further reduction in acid concentration and analysis time is achieved for the arsenic analysis by using modified method. Analysis in both the methods is sensitive at ppb level.