Acute and Chronic Toxicity of Chlorine Dioxide (ClO2) and Chlorite (ClO2ˉ) to Rainbow Trout (Oncorhynchus mykiss) (4 pp)

Goal, Scope and Background Chlorite (ClO2ˉ) is a primary decomposition product when chlorine dioxide (ClO2) is added during water treatment; therefore the toxic effects of both compounds on aquatic organisms are possible. Limited data are available concerning their toxicity to fish. The aim of this study was to investigate sensitivity of rainbow trout to acute and chronic toxicity of chlorine dioxide and chlorite, and to estimate the Maximum-Acceptable-Toxicant-Concentration (MATC) of those compounds in fish. Methods The acute and chronic toxicity of chlorine dioxide and chlorite to larval and adult rainbow trout was investigated in 96-hour to 20-day laboratory exposures evaluating the wide range spectrum of biological indices under semi-static conditions. Results and Discussion Median lethal concentration (96-hour LC50) values derived from the tests were: 2.2 mg/l for larvae; 8.3 mg/l for adult fish and 20-day LC50 for larvae was 1.6 mg/l of chlorine dioxide, respectively. Chlorite was found to be from 48 to 18 times less acutely toxic to larvae and adult fish, correspondingly. Both chemical compounds induced similar toxic effects in rainbow trout larvae during chronic tests (they affected cardio-respiratory and growth parameters), but chlorine dioxide had a higher toxic potency than chlorite. A significant decrease in the heart rate and respiration frequency of larvae was established. However, within an increase in exposure duration recovery of cardio-respiratory responses was seen to have occurred in larvae exposed to chlorite. Meanwhile, in larvae exposed to chlorine dioxide, a significant decrease in cardio-respiratory responses remained during all 20-day chronic bioassays. Chlorine dioxide also more strongly affected growth parameters of rainbow trout larvae at much lower test concentrations. Decreased rate of yolk-sack resorption occurred only in the tests with chlorine dioxide. Conclusions Maximum-Acceptable-Toxicant-Concentration (MATC) of 0.21 mg/l for chlorine dioxide and of 3.3 mg/l for chlorite to fish was derived from chronic tests based on the most sensitive parameter of rainbow trout larvae (growth rate). According to substance toxicity classification accepted for Lithuanian inland waters, chlorine dioxide and chlorite can be referred to substances of \moderate\ toxicity to fish. Recommendations and Outlook Due to its very reactive nature, chlorine dioxide is rapidly (in a few hours) reduced to chlorite, which is persistent also as a biocide but 16 times less toxic to fish, according to MATC. Therefore, it is much more likely that fish will be exposed to chlorite than to chlorine dioxide in natural waters. Presently accepted, the Maximum-Permitted-Concentration of total residual chlorine (TRC) in waste-water discharging into receiving waters is 0.6 mg/l. If this requirement will not be exceeded, it is unlikely that fish would be exposed to lethal or even to sublethal concentrations of chlorine dioxide or chlorite. Furthermore, chlorine dioxide does not generate toxic nitrogenous (chloramines) or carcinogenic organic residuals (trihalomethanes). All these properties make chlorine dioxide a more promising biocide than chlorine.     

Arsenic-induced health crisis in peri-urban Moyna and Ardebok villages, West Bengal, India: an exposure assessment study

Drinking of arsenic (As)-contaminated groundwater has adverse effects on health of millions of people worldwide. This study aimed to determine the degree of severity of As exposure from drinking water in peri-urban Moyna and Ardebok villages, West Bengal, India. Arsenic concentrations in hair, nail and urine samp les of the individuals were determined. Arsenical dermatosis, keratosis and melanosis were investigated through medical evaluation. We have evaluated the association between As exposure from drinking water, and keratosis and melanosis outcomes. The results showed that 82.7?% of the sampled tube wells contain As concentrations above 10?μg/L, while 57.7?% contain As concentrations above 50?μg/L. The hair, nail and urine As concentrations were positively correlated with As concentrations in drinking water. In our study population, we observed a strong association between As concentrations ranging 51-99?μg/L and keratosis and melanosis outcomes, although the probability decreases at higher concentration ranges perhaps due to switching away from the use of As-contaminated tube wells for drinking and cooking purposes. High As concentrations in hair, nail and urine were observed to be associated with the age of the study population. The level of As concentrations in hair, nail and urine samples of the study population indicated the degree of severity of As exposure in the study region.     

Experimental study of solar energy–based water purifier of single-slope type by incorporating a number of similar evacuated tubular collectors

Environmental Science and Pollution Research - This research paper deals with the experimental investigation of solar energy–based water purifier (SEBWP) of single-slope type by incorporating...     

Comparative performance of flat sheet and spiral wound modules in the nanofiltration of reactive dye solution

Background and purpose

Besides the opportunities for reuse, stringent regulations and growing public awareness demand an enhanced quality of effluent from dye industries. Treatment of an aqueous solution of dye (reactive red 198) was carried out in a nanofiltration unit using both flat sheet and spiral wound modules to obtain a comparative performance evaluation in terms of permeate flux and quality.

Methods

Hydrophilized polyamide membrane with molecular weight cutoff of 150 was used for the experiments. Effects of trans-membrane pressure (TMP), feed concentration and addition of salt on permeate flux were investigated. Percent reduction of color, chemical oxygen demand (COD), total dissolved solid (TDS), and conductivity were determined to assess performance of the membrane.

Results

The maximum flux decline was 16.1% of its initial value at 490 kPa TMP with 50 ppm feed concentration in spiral wound module, whereas the same in flat sheet under same conditions was 7.2%. The effect of TMP showed a quasi-linear increase in flux with increasing pressure. Increased permeate concentration led to the reduction in observed retention of dye in the membrane. The average reduction in color, COD, and TDS were 96.88%, 97.38%, and 89.24%, respectively. The decline in permeate flux was more in case of spiral wound module compared to flat sheet. However, spiral wound module performed better in terms of color removal, COD reduction, and TDS removal.

Conclusion

Substantial removal of color was achieved in the nanofiltration experiments with a marked reduction in COD and TDS. The process allowed the production of permeate stream with great reutilization possibilities.     

Investigating the key indicators for evaluating post‐disaster shelter

This study sought to identify the primary indicators for evaluating shelter assistance following natural disasters and then to develop a shelter evaluation instrument based on these indicators. Electronic databases and the ‘grey’ literature were scoured for publications with a relation to post‐disaster shelter assistance. Indicators for evaluating such assistance were extracted from these publications. In total, 1,525 indicators were extracted from 181 publications. A preliminary evaluation instrument was designed from these 1,525 indicators. Shelter experts checked the instrument for face and content validity, and it was revised subsequently based on their input. The revised instrument comprises a version for use by shelter agencies (48 questions that assess 23 indicators) and a version for use by beneficiaries (52 questions that assess 22 indicators). The instrument can serve as a standardised tool to enable groups to gauge whether or not the shelter assistance that they supply meets the needs of disaster‐affected populations.     

Historical reconstruction of atmospheric lead pollution in central Yunnan province, southwest China: an analysis based on lacustrine sedimentary records

Atmospheric lead (Pb) pollution during the last century in central Yunnan province, one of the largest non-ferrous metal production centers in China, was reconstructed using sediment cores collected from Fuxian and Qingshui Lakes. Lead concentrations and isotopic ratios (²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb) were measured in sediment cores from both lakes. The operationally defined chemical fractions of Pb in sediment core from Fuxian Lake were determined by the optimized BCR procedure. The chronology of the cores was reconstructed using ²¹⁰Pb and ¹³⁷Cs dating methods. Similar three-phase variations in isotopic ratios and enrichment factors of Pb were observed in the sediment cores from both lakes. Before the 1950s, the sediment data showed low ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb ratios and enrichment factors (EFs?=?~1), indicating that the sedimentary Pb was predominantly of lithogenic origin. However, these indices were increased gradually between the 1950s and the mid-1980s, implying an atmospheric Pb deposition. The EFs and isotopic ratios of Pb reached their peak during recent years, indicating aggravating atmospheric Pb pollution. The average anthropogenic Pb fluxes since the mid-1980s were estimated to be 0.032 and 0.053 g m^?2 year^?1 recorded in Fuxian and Qingshui cores, respectively. The anthropogenic Pb was primarily concentrated in the reducible fraction. Combining the results of Pb isotopic compositions and chemical speciations in the sediment cores and in potential sources, we deduced that recent aggravating atmospheric Pb pollution in central Yunnan province should primarily be attributed to regional emissions from non-ferrous metal production industries.     

Seasonal air quality profile of inorganic ionic composition of PM10 near Taj Mahal in Agra, India

Atmospheric aerosols and their impacts on the environment particularly on human health is an issue of significant public and governmental concern. Though studies on air quality related to total suspended particulate matter have done by various authors in India, yet respirable suspended particulate matter (PM₁₀) is not characterized so far particularly in a historical and world heritage city like Agra. This study presents seasonal variation in mass levels of PM₁₀ and its ionic composition. PM₁₀ samples were collected in the proximity of Taj Mahal and subjected to chemical analysis using ion chromatography technique. The preliminary findings reveal that the 24-h average of PM₁₀ mass level varies from 115 to 233, 155 to 321, and 33 to 178 μg/m³, respectively, in summer, winter, and rainy seasons indicating critical pollution situation. These values are very much higher than the National Ambient Air Quality Standards of 75 μg/m³ (prescribed by Central Pollution Control Board, India) in both of summer and winter seasons whereas quite near the permissible limits in rainy season. The equivalent ratios of NH₄ ⁺ to nonsea salt SO₄ ^2? and NO₃ ^? and ∑Cations to ∑Anios were found to be greater than unity indicating high source strength of ammonia and alkaline nature of aerosols. The study suggests the need for continuous and long-term systematical sampling and detailed physiochemical analysis of PM₁₀ and also to know the characteristics of PM in background areas for better understanding of the emission sources.     

Mixed response in bacterial and biochemical variables to simulated sand mining in placer-rich beach sediments,Ratnagiri, West coast of India

We investigated the influence on bacterial community and biochemical variables through mechanical disturbance of sediment-akin to small-scale mining in Kalbadevi beach, Ratnagiri, a placer-rich beach ecosystem which is a potential mining site. Changes were investigated by comparing three periods, namely phase I before disturbance, phase II just after disturbance, and phase III 24 h after disturbance as the bacterial generation time is ≤7 h. Cores from dune, berm, high-, mid-, and low-tide were examined for changes in distribution of total bacterial abundance, total direct viability (counts under aerobic and anaerobic conditions), culturability and biochemical parameters up to 40 cm depth. Results showed that bacterial abundance decreased by an order from 10⁶ cells g^− 1 sediment, while, viability reduced marginally. Culturability on different-strength nutrient broth increased by 155% during phase II. Changes in sedimentary proteins, carbohydrates, and lipids were marked at berm and dune and masked at other levels by tidal influence. Sedimentary ATP reduced drastically. During phase III, Pearson’s correlation between these variables evolved from non-significant to significant level. Thus, simulated disturbance had a mixed effect on bacterial and biochemical variables of the sediments. It had a negative impact on bacterial abundance, viability and ATP but positive impact on culturability. Viability, culturability, and ATP could act as important indicators reflecting the disturbance in the system at short time intervals. Culturability, which improved by an order, could perhaps be a fraction that contributes to restoration of the system at bacterial level. This baseline information about the potential mining site could help in developing rational approach towards sustainable harnessing of resources with minimum damage to the ecosystem.     

Ergonomics improvements of the visual inspection process in a printed circuit assembly factory.

An ergonomics improvement study was conducted on the visual inspection process of a printed circuit assembly (PCA) factory. The process was studied through subjective assessment and direct observation. Three problems were identified: operators' eye problems, insufficient time for inspection and ineffective visual inspection. These problems caused a huge yearly rejection cost of US 298,240 dollars, poor quality, customer dissatisfaction and poor occupational health and safety. Ergonomics interventions were made to rectify the problems: reduced usage of a magnifying glass, the use of less glaring inspection templates, inspection of only electrically non-tested components and introduction of a visual inspection sequence. The interventions produced savings in rejection cost, reduced operators' eye strain, headaches and watery eyes, lowered the defect percentage at customers' sites and increased the factory's productivity and customer satisfaction.