Microbial kinetic analysis of three different types of EBNR process

The disadvantages of developed biological nutrient removal (BNR) processes (additional energy for liquid circulation and addition of external carbon substrate for denitrification in anoxic zones) were improved by reconfiguring the process into (1) an anaerobic zone followed by multiple stages of aerobic-anoxic zones (TNCU3 process) or (2) anaerobic, oxic, anoxic, oxic zones in sequence (TNCU2 process). These two pilot plants were operated at a recycling sludge ratio of 0.5 without internal recycle of nitrified supernatant. The sludge retention time was maintained at 10 d. The main objective of this study is to analyze the kinetics of different microorganisms in these two processes and A2O process by using the Activated Sludge Model No. 2d. The effective removal efficiency of carbon, total phosphorus and total nitrogen at 87-98%, 92-100% and 63-80%, respectively, were achieved in the testing runs. According to model simulations, the microbial kinetics in the TNCU3 and TNCU2 processes would be affected by different operations. When the step feeding strategy was adopted, the HRT was longer due to the less influent flowrate in the front stages and the microbes would grow in quantities by about 6% in the aerobic reactors. In the followed anoxic reactors, the microbes would decrease in quantities by about 12% due to the dilution effect. The dilution effects in TNCU3 and TNCU2 processes did not take place in A2O process because the recycling mixed liquid from the aerobic reactor to the anoxic reactor still contained particulate components. The XH, XPAO, and XAUT concentrations in the effluent of the last tank were lower when the step-feeding mode was adopted. The TNCU3 and TNCU2 processes could be operated efficiently without nitrified liquid circulation and addition of external carbon substrate for denitrification.     

Evaluation of different granulated active carbons for removal of Microcystin-LR from contaminated water

Most frequently encountered freshwater cyanobacterial toxin is Microcystin-LR (MC-LR). Microcystins released from cells into water have been responsible for the death of humans, domestic and wild animals. Removal of microcystin by active carbon has been one of the best methods available so far. This study evaluates three grades of active carbon namely 40, 60 and 80 CTC for their removal efficiency of MC-LR from contaminated water. Kinetics of toxin removal was studied in time course experiments. Protection in mouse model was studied for the samples after the adsorption. Toxin quantitation was done by HPLC method. The MC-LR concentration after 24 hr treatment with 40, 60 and 80 CTC carbons were 4.8, 3.3 and 1.3 microg/ml respectively from an initial concentration of 5.2 microg/ml. Protection in mouse bioassay was seen after 48, 24 and 2 hr of adsorption time respectively for 40, 60 and 80 CTC carbons. 80 CTC carbon was found to be most efficient in removing MC-LR from contaminated water.     

Assessment of deposition of MEMC (seed dressing fungicide) in exposed rice grain through study of seedling growth parameters

Rice seed grains exposed to 240 ppm of seed dressing fungicide, MEMC showed increase in deposition of mercury with increase in period of observation (0h to 48h) in 765+/-5 mg of intact endosperm. The gradual increase in mercury deposition in intact endosperm caused simultaneous decrease in mercury content of the seed coat. Exposure periods of 5 to 20 min with 240 ppm of MEMC showed 5.5 to 8.72 microg of mercury deposition in 765+/-5 mg of intact endosperm. Increase in period of exposure (3 to 20 min) to 240 ppm of MEMC and also increase in chronic treatment to lower concentrations (1.5 ppm to 24 ppm) to seed grains have shown similar results in seedling growth parameters. Lower period of exposure or exposure to lower concentrations, both showed a significant inhibition of root growth, however the shoot growth showed stimulation. But higher exposure period or exposure to higher concentrations brought inhibition of both root and shoot growth. The exposure period showing 50% of root growth inhibition of 72h old seedling was calculated to be 10 min So also the chronic treatment showing the 50% of root growth inhibition was calculated to be 9 ppm. Ten min exposure of rice grain to 240 ppm of MEMC showed deposition of 7.11 microg of mercury in 765+/-5 mg of intact endosperm at 48h of observation (optimal phase of germinating process). Regression analysis indicated that by the time of 72h the intact endosperm and developing seedling might have acquired with a minimum amount of 10.23 microg of mercury from the seed coat. Finally it can be said that 10.23 microg of MEMC might be bringing 50% root growth inhibition in 72h old seedlings and 16.71 microg of mercury causing 50% inhibition of both root and shoot growth of 120h old seedlings.     

A study in hospital noise - a case from Taiwan.

Hospitals are places that allow patients to rest and recover, and therefore must be quiet inside and in the surrounding neighborhood. One medical center was chosen as a sample hospital. This hospital was a tertiary care center during the 2003 outbreak of the severe acute respiratory syndrome (SARS) in Taiwan. The measurement results show that the noise level in the wards and stations was between 50.3 and 68.1 dB which exceeded the suggested hospital ward sound level. The quietest units were the Surgical Intensive Care Unit and recovery rooms with a noise level lower than 50 dB during the night. The higher noise levels were in the hall and pharmacy which were highly populated areas. This study analyzed the causes of this excessive noise and used noise reduction methods. The paired t test was performed and the results showed improvement methods were successful. This study found the noise levels reached 98.5-107.5 dB in power generator rooms and air-conditioning facilities, and suggests employees use ear plugs.     

Electrochemical conversion of biomass-derived aldehydes into fine chemicals and hydrogen: A review

Environmental Chemistry Letters - The decrease in fossil fuel usage and the projected 28% increase in the global energy demand by 2040 are calling for advanced methods to convert modern biomass...     

Assessment of the Nested Grid Model Estimates for Driving Regional Visibility Models in the Southwestern United States

ABSTRACT

The Nested Grid Model (NGM) is a primitive-equation meteorological model that is routinely exercised over North America for forecasting purposes by the National Meteorological Center. While prognostic meteorological models are being increasingly used to drive air quality models, their use in conducting annual simulations requires significant resources. NGM estimates of wind fields and other meteorological variables provide an attractive alternative since they are typically archived and readily available for an entire year. Preliminary evaluation of NGM winds during the summer of 1992 for application to the region surrounding the Grand Canyon National Park showed serious shortcomings. The NGM winds along the borders between California, Arizona and Mexico tend to be northwesterly with a speed of about 6 m/sec, while the observed flow is predominantly southerly at about 2-5 m/sec. The mesoscale effect of a thermal low pressure area over the highly heated Southern California and western Arizona deserts does not appear to be represented by the NGM because of its coarse resolution and the use of sparse observations in that region. Tracer simulations and statistical evaluation against special high resolution observations of winds in the southwest United States clearly demonstrate the northwest bias in NGM winds and its adverse effect on predictions of an air quality model. The “enhanced” NGM winds, in which selected wind observations are incorporated in the NGM winds using a diagnostic meteorological model provide additional confirmation on the primary cause of the northwest bias. This study has demonstrated that in situations where limited resources prevent the use of prognostic meteorological models, previously archived coarse resolution wind fields in which additional observations are incorporated to correct known biases provide an attractive option.     

Equity and productivity assessments in the Olifants River basin, South Africa

Emerging approaches to water resources development and management typically highlight equity and productivity as two main objectives. In the context of integrated water resources management within a river basin, managers and stakeholders often need a comparative assessment of different options for water augmentation and/or allocation. Pitting such options against predefined objectives, such as equity and productivity, requires an assessment of the effects that available options will have on these objectives. Available documentation indicates that not only does the interpretation of such objectives vary widely, but also the available methods for assessing equity and productivity run into significant limitations in the availability of adequate data. This limitation has largely kept decision makers from gaining a comprehensive overview of equity and productivity scenarios, whether within or across sectors, that could facilitate better‐informed decisions. To address this methodological gap, this article scrutinizes different notions associated with equity and water productivity, and limitations in prevalent assessment methods with the view to develop and demonstrate pragmatic methodologies for assessing equity and productivity in data‐scarce contexts. The discussion and findings are based on a review of relevant literature and empirical and consultative research work in the Olifants River basin in South Africa. The demonstrated methodologies for assessing equity and productivity, besides being useful in data‐scarce contexts, are insightful for initiating several policy measures and also for exploring the relationship between equity and water productivity.     

Modified Fenton's processes for effective in‐situ chemical oxidation—Laboratory and field evaluation

Fenton's reagent in its conventional form, although effective for contaminant treatment, is impractical from an in‐situ field application perspective due to low pH requirements (i.e., pH 3‐4), and limited reagent mobility when introduced into the subsurface. Modified Fenton's processes that use chelated‐iron catalysts and stabilized hydrogen peroxide have been developed with the goal of promoting effective in‐situ field application under native pH conditions (i.e., pH 5‐7), while extending the longevity of hydrogen peroxide. Laboratory experiments conducted in soil columns packed with organic soil to compare modified Fenton's catalysts with conventional catalysts (acidified iron [II]) indicated superior mobility and sorption characteristics for modified Fenton's catalysts. Furthermore, the acidic pH of a conventional catalyst was buffered to the native soil range, leading to increased iron precipitation/adsorption following permeation through the soil column. The chelates present within the modified Fenton's catalyst showed greater affinity toward iron compared with the native soil and, hence, minimized iron loss through adsorption during the permeation process even at pH 5‐7. Field effectiveness of the modified Fenton's process was demonstrated at a former dry‐cleaning facility located in northeast Florida. Preliminary laboratory‐scale experiments were conducted on soil‐slurry and groundwater samples to test the process efficacy for remediation of chlorinated solvents. Based on successful experimental results that indicated a 94 percent (soil slurry) to 99 percent (groundwater) reduction of cis‐1,2‐DCE, PCE, and TCE, a field‐scale treatment program was initiated utilizing a plurality of dual‐zone direct push injection points installed in a grid fashion throughout the site. Results of treatment indicated a 72 percent reduction in total chlorinated contamination detected in the site groundwater following the first injection event; the reduction increased to 90 percent following the second injection event. © 2002 Wiley Periodicals Inc.     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.