Development and demonstration of an explicit lumped-parameter biofilter model and design equation incorporating monod kinetics

Biofiltration is an economical air pollution control (APC) technology, particularly suitable for the treatment of air-streams having high flow rates and low concentrations of volatile organic compounds (VOCs). This technology utilizes enzymatic catalysis at ambient conditions to mineralize such pollutants to CO2, H2O, and salts. A pilot-scale study conducted for more than 4 years investigated the development of a new biofiltration technology employing trickle bed air biofilters (TBABs). Following the completion of this experimental study, additional data analysis was performed to develop a simple lumped-parameter biofilter model, assuming first-order kinetics. This model related the observed biofilter performance to the principle independent physical, thermodynamic, and biochemical parameters. The initial model has subsequently been expanded to incorporate Monod kinetics. In this paper, the development and use of the final explicit lumped-parameter biofilter model and design equation, incorporating Monod kinetics, are presented. To facilitate the application of this model, practical procedures are also presented for the determination of VOC solubility, VOC biokinetic Monod parameters, and the maximum practical biofilter inlet VOC concentration.     

Impact of density of coating agent on antibacterial activity of silver nanoparticle impregnated plasma treated activated carbon

To use stabilized nanoparticles(NPs) in water as disinfectants over a very long period, the amount of coating agent(for NP stabilization) needs to be optimized. To this end, silver nanoparticles(Ag-NPs) with two different coating densities of tri-sodium citrate(12.05 and46.17 molecules/nm~2, respectively), yet of very similar particle size(29 and 27 nm, respectively)were synthesized. Both sets of citrate capped NPs were then separately impregnated on plasma treated activated carbon(AC), with similar Ag loading of 0.8 and 0.82 wt.%, respectively. On passing contaminated water(containing 10~4 CFU Escherichia coli/m L of water) through a continuous flow-column packed with Ag/AC, zero cell concentration was achieved in 22 and 39 min, with Ag-NPs(impregnated on AC, named as Ag/AC) having lower and higher coating density, respectively. Therefore, even on ensuring similar Ag-NP size and loading, there is a significant difference in antibacterial performance based on citrate coating density in Ag/AC.This is observed in lower coating density case, due to both:(i) higher Ag~+ ion release from Ag-NP and(ii) stronger binding of individual Ag-NPs on AC. The latter ensures that, Ag-NP does not detach from the AC surface for a long duration. TGA-DSC shows that Ag-NPs with a low coating density bind to AC with 4.55 times higher adsorption energy, compared to Ag/AC with a high coating density, implying stronger binding. Therefore, coating density is an important parameter for achieving higher antibacterial efficacy, translating into a faster decontamination rate in experiments, over a long period of flow-column operation.     

The energy-environment nexus: aerosol science and technology enabling solutions

Energy issues are important and consumption is slated to increase across the globe in the future. The energy-environment nexus is very important as strategies to meet future energy demand are developed. To ensure sustainable growth and development, it is essential that energy production is environmentally benign. There are two temporal issues—one that is immediate, and needs to address the environmental compliance of energy generation from fossil fuel sources; and second that is the need to develop newer alternate and more sustainable approaches in the future. Aerosol science and technology is an enabling discipline that addresses the energy issue over both these time scales. The paper is a review of aspects of aerosol science and engineering that helps address carbon neutrality of fossil fuels. Advanced materials to meet these challenges are discussed. Future approaches to effective harvesting of sunlight that are enabled by aerosol studies are discussed.     

Monitoring of soil biochemical quality parameters under greenhouse spinach cultivation through animal waste recycling

Under the intensive agricultural system, direct application of animal slurries to soils can provide a sustainable disposal of these wastes by inducing positive changes in soil quality and fertility. However, how animal wastes quantitatively affect the key nutrients (C, N, P and S) transforming soil enzymes is not clearly known. A greenhouse spinach cultivation study demonstrated that pig slurry, either in raw (RS) or processed (aerobically aged) (PS) form, significantly (p?β-glucosidase (23–39%), urease (59–103%), nitrate reductase (73–103%) and dehydrogenase (27–72%)) and microbial growth in soil as compared to the unamended control. However, it did not significantly (p?>?.05) alter the aryl sulphatase enzyme activity. Slurry applications also significantly improved the macro (N, P and K) and micronutrients (Cu, Mn, Zn and Fe) uptake by spinach plant and hence the yield (2.9–3.38 times higher than control). Similarly, compared to chemical fertilisers the application of pig slurries improved soil biological and biochemical parameters as well as plant nutrients uptake. This study demonstrated the closing of global energy and nutrient cycles through land application of animal wastes without compromising the crop yield.     

Prioritising development planning in the Indian semi-arid Deccan using sustainable livelihood security index approach

This paper presents the status of sustainable livelihood security index (SLSI) of Karnataka, the most drought prone state in the Southern part of India. Computation of ecological security index, economic efficiency index and social equity index, and finally SLSI were carried out at the district level for the entire state, using empirical data. The selected indicators were first normalised, and then using estimated weights, indices were computed. The results indicate that the state has a very low SLSI with only 27.6% of total geographical area (TGA) and 21.7% of population being placed in the ‘sustainable’ and ‘highly sustainable’ categories (covering 10 districts) while only 34% of the TGA covering six districts falls in the ‘moderately sustainable’ category. The remaining area, confined mostly to the northern parts of the state, comprising 14 districts (51.8% of the state’s TGA) is categorised as ‘less sustainable’ and ‘very less sustainable’ exposing 44.4% (27.14 million) of state’s population to the perils of uncertain rainfall, high soil erosion rates, high social inequality and poor resource use efficiency. There is an urgent need to reorient development programmes and prioritise development investments in these vulnerable districts so that they are provided resources and opportunities to improve their ecological (more forest cover and less soil erosion), economic (higher agricultural productivity) and social (improved health and education facilities and rural infrastructure) status and achieve sustainable levels of livelihood.     

An experimental study of soil conservation using herbaceous plants in Majuli Island, Assam, India

A model experiment on soil conservation utilising the plantation of certain herbaceous plants in a selected stretch of Majuli, the largest riverine island in the world, was carried out. The plantation followed work to establish the proper inclination for the river bank. The soil erosion in the experimental site was reduced to only about 2% compared with about 15–20% in the previous years. All the four species selected for the present study had excellent soil binding capacity and were thus helpful in stabilizing the highly vulnerable soil in the flood plain areas of the region.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Cross-reactivity of anti-Salmonella egg-yolk antibodies to Salmonella serovars

The cross-reactivity of egg yolk antibodies specific to antigens of Salmonella Enteritidis and Salmonella Typhimurium to killed bacterial cells of common Salmonella serovars were tested using an indirect Enzyme Linked Immunosorbent Assay (ELISA). Egg yolk antibodies were produced against purified fimbriae, flagella and lipopolysaccharide (LPS) of S. Enteritidis strain ATCC13076 and flagella, LPS and outer membrane proteins (OMP) of S. Typhimurium strain ATCC13311. For immunological specificity of egg yolk antibodies against killed bacterial cells, we found that the titers of the anti-S. Enteritidis egg yolk antibodies were higher than those of the anti-S. Typhimurium antibodies. In the evaluation of cross-reactivity of these egg yolk antibodies to various Salmonella serovars, we observed that the anti-S. Enteritidis antibodies exhibited more specific affinity than those of the anti-S. Typhimurium antibodies. All S. Enteritidis strains reacted specifically with the anti-S. Enteritidis fimbrial and flagellar egg yolk antibody whereas anti-S. Enteritidis LPS and anti-S. Typhimurium LPS, OMP and flagellar antibodies displayed non-specific reactivity to all Salmonella serovars used in this study. This finding suggests that it may be possible to design a anti-fimbrial egg yolk antibody of S. Enteritidis as a diagnostic tool and a cocktail of OMP and LPS antigens of S. Enteritidis and S. Typhimurium could be used for administering broad spectrum passive immunity to protect against the colonization of pathogenic Salmonella strains in food animals.     

Trace elements in surface sediments of the Hooghly (Ganges) estuary: distribution and contamination risk assessment

Our objective was to evaluate distribution and accumulation of trace elements (TEs) in surface sediments along the Hooghly (Ganges) River Estuary, India, and to assess the potential risk with view to human health. The TE concentrations (mg kg^?1 dry weight) exhibited a wide range in the following order: Al (31.801 ± 15.943) > Fe (23.337 ± 7584) > Mn (461 ± 147) > S (381 ± 235) > Zn (54 ± 18) > V (43 ± 14) > Cr (39 ± 15) > As (34 ± 15) > Cu (27 ± 11) > Ni (24 ± 9) > Se (17 ± 8) > Co (11 ± 3) > Mo (10 ± 2) > Hg (0.02 ± 0.01). Clay, silt, iron, manganese and sulphur were important for the accumulation of TE in the sediments as confirmed by factor analysis and Pearson correlation. The accumulation and dispersal of TEs were most likely to be governed by both tide-induced processes and anthropogenic inputs from point and non-point sources. Enrichment factor analysis and geoaccumulation index revealed serious contamination of the sediments with Se and As, while comparing the consensus-based sediment quality guidelines (SQGs), adverse biological effects to benthic fauna might be caused by As, Cu, Ni and Cr. This investigation may serve as a model study and recommends continuous monitoring of As, Se, Cu, Ni and Cr to ascertain that SQGs with respect to acceptable levels of TEs to safeguard geochemical health and ecology in the vicinity of this estuary.