The effect of changes to the method of estimating the pollen count from aerobiological samples

Pollen data have been recorded at Novi Sad in Serbia since 2000. The adopted method of producing pollen counts has been the use of five longitudinal transects that examine 19.64% of total sample surface. However, counting five transects is time consuming and so the main objective of this study is to investigate whether reducing the number to three or even two transects would have a significant effect on daily average and bi-hourly pollen concentrations, as well as the main characteristics of the pollen season and long-term trends. This study has shown that there is a loss of accuracy in daily average and bi-hourly pollen concentrations (an increase in % ERROR) as the sub-sampling area is reduced from five to three or two longitudinal transects. However, this loss of accuracy does not impact on the main characteristics of the season or long-term trends. As a result, this study can be used to justify changing the sub-sampling method used at Novi Sad from five to three longitudinal transects. The use of two longitudinal transects has been ruled out because, although quicker, the counts produced: (a) had the greatest amount of % ERROR, (b) altered the amount of influence of the independent variable on the dependent variable (the slope in regression analysis) and (c) the total sampled surface (7.86%) was less than the minimum requirement recommended by the European Aerobiology Society working group on Quality Control (at least 10% of total slide area).     

Sources of organochlorine pesticides in air in an urban Mediterranean environment: volatilisation from soil

Organochlorine pesticide (OCP) cycling was studied in the area of Banja Luka, Bosnia and Herzegovina, over 3 days in summer with high temporal (4 h-means) and spatial (3 sites distanced 3-6 km) resolutions. Elevated levels of DDX compounds (i.e. o,p'- and p,p'-isomers of DDT, DDE and DDD, 44-74 pg m(-3) at the urban sites and 27 pg m(-3) as a background level), HCH (α-, β- and γ-isomers, 52-70 vs. 147 pg m(-3)), HCB (34-48 vs. <0.1 pg m(-3)) and pentachlorobenzene (6.8-9.9 vs. 6.0 pg m(-3)) were found. The variation of OCP levels at the two urban sites was not in phase, except for most DDX compounds. This was related to background levels, which for HCH were higher than in the urban area. Vertical profiles between samples collected from 1.1 and 2.3 m (part of the time 0.6 and 2.3 m) above a soil, which was only moderately contaminated by OCPs (0.12 ng g(-1) HCH, 0.11 ng g(-1) DDX, 0.44 ng g(-1) HCB) were analysed. Volatilisation from the ground caused negative vertical concentration gradients of HCH isomers (day and night), but not for HCB (except for 1 day-time sample) and DDX compounds (except p,p'-DDD, day-time, sporadically). The concentration in air and the vertical concentration gradient of the HCH isomers varied with air temperature (day-time maxima), while the variation of the HCB concentration was inversely related to air temperature and was determined by mixing (night-time maxima). α- and β-HCH were volatilised from soil throughout the three days, even during periods of cooling. Fugacity calculations, based on the absorption in soil organic matter as the process determining retention in soil, underestimated the volatilisation of β-HCH and p,p'-DDD. It is concluded that the representativeness of point measurements of OCPs in urban areas is limited by the spatial variability of soil contamination.     

Traces of DU in samples of environmental bio-monitors (non-flowering plants, fungi) and soil from target sites of the Western Balkan region

This paper reports results of gamma and alpha spectrometric measurements for mosses, lichens, fungi and soil samples from areas in the Balkans targeted by depleted uranium (DU). Samples were collected in 2002 and 2003 in the vicinity of several villages, principally Han Pijesak (Bosnia and Herzegovina, hit by DU in 1995) and Bratoselce (South Serbia, hit by DU in 1999) and in lesser numbers from Gornja Stubla, Kosovo (which is identified as a high natural radon/thoron area) and Presevo close to the Kosovo border. In the course of gamma spectrometric measurements some results suggested samples with unusual high uranium contents which might be considered to be a signature for the presence of DU, although many samples had very high detection limits. Alpha spectrometric measurements directly proved the presence of DU for five samples, all from directly targeted places. These were samples of mosses, lichens and soil. For some samples homogeneity tests were applied which showed a rather even distribution of DU in these samples. No trace of DU was found in any sample from a dwelling.     

Transformations of <Emphasis Type="Italic">n</Emphasis>-alkanes from petroleum pollutants in alluvial groundwaters

Investigations presented in this paper were aimed at defining the alterations of n-alkane composition in cases of oil-polluted alluvial sediments. Therefore, oil-polluted groundwater samples, taken in five different time intervals during a period of 28 months, were investigated. Samples of alluvial sediments were taken from two boreholes within an oil refinery at Pancevo, Yugoslavia. In both boreholes significant alterations with characteristic degradation of "oil" n-alkanes with no odd- or even-member predominance were observed, as well as subsequent synthesis of new ones with pronounced even-member predominance, and with maxima at C₁₆ and C₁₈. Since no additional contamination of boreholes was observed by analyses of steranes and triterpanes, the observed changes can only be attributed to microbial activity. It is assumed that for the degradation of oil n-alkanes, as well as for the synthesis of "new" n-alkanes, algae such as dinoflagellates are responsible. This assumption was confirmed by identification of n-alcohols with even-member predominance (C₁₄–C₂₀), by identification of cholesterol, as well as of n-fatty acids with even-member predominance (C₁₄–C₁₈) in the extract with n-alkane even-member predominance. Electronic Publication     

Fractionation and potential mobility of trace metals in Danube alluvial aquifer within an industrialized zone

Thirty-five alluvial sediments of the River Danube and 12 groundwater samples were taken within the Pan?evo Oil Refinery (Serbia). The results for groundwater samples exceed European primary drinking water standards for Fe (obtained results, >200 μg/l) and Mn (obtained results, >50 μg/l), while the levels of the trace metals are below the thresholds for drinking water quality. Sediments were treated by sequential extraction procedure with five different solutions, each having a higher extraction capacity than the previous one. We also wanted to determine the possible relationships among trace metals and between sediment properties and elemental concentrations. These solutions partitioned metals into CH₃COONH₄ extractable (F1); HCl carbonate extractable and NH₂OH·HCl easily reducible (F2); (NH₄)₂C₂O₄/H₂C₂O₄ moderately reducible (F3); H₂O₂–HNO₃ organic/sulfide extractable fractions (F4); and HCl acid-soluble residue (F5). The sum of trace metals Ni, Pb, Cu, and Zn associated with the first two fractions (exchangeable, carbonate, and easily reducible) is significant and extremely important because it represents the proportion of heavy metals that can be easily remobilized by changes in environmental conditions such as pH, redox potential, salinity, etc. Sediments located nearer the groundwater flow are exposed to stronger groundwater fluctuation and had a higher quantity of amorphous and less stable substrates of trace metals. Principal component analysis was used to understand and visualize the associations between the trace metals and certain geological forms within analyzed sediments. The observed association between Cr with total sulfur and Mn from the acid-soluble residue could indicate that Cr is in the form of reduced, less toxic Cr(III), which is from the ecochemical point of view very important.     

A Blending Problem in Copper Production

Well-known mathematical models related to blending problem are extended and adjusted to the specific blending problem in copper production. Certain constraints are deduced from the process of making copper as well as from the ecological aspects of the production process. The models are applied to the production experience at the copper-smelting plant RTB Bor. The implementation of introduced models was made in the programming package MATHEMATICA. Numerical results corresponding to the introduced mathematical model were compared with results obtained by implementing the classical mathematical models.     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – I. Levels and variabilities

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study the spatial and temporal variabilities and to explore the significance of averaging effects inherent to 24 h-sampling. Measurement uncertainty was quantified on basis of three independent side-by-side samplers, deployed at one of the sites.PAH abundances in the urban and rural environments differed largely. Levels at the urban sites exceeded the levels at the rural site by >100%. The discrepancy was largely dominated by emission of 3–4 ring PAHs in the city, while 5–6 ring PAHs were more evenly distributed between city sites and the hill site. During the night a higher fraction of the semivolatile PAHs might have been stored in the soil or sorbed to surfaces. PAH patterns were undistinguishable across the three sites. However, concentrations of more particle-associated substances differed significantly between the urban sites than between one of the urban sites and the rural site (3σ uncertainty). Time-averaging (on a 24 h-basis) would have masked the significant inter-site differences of half of the substances which were found at different levels (on a 4 h-basis).     

Types,sources, socioeconomic impacts,and control strategies of environmental noise: a review

Noise exposure has reached an alarming degree over the years because of rapid growth in the industry, transportation, and urbanization. Therefore, it is a dire need to provide awareness of the sources and mitigation strategies of noise, and to highlight the health, and socio-economic impacts of noise. A few research studies have documented this emerging issue; however, there is no comprehensive document describing all types of noise, their impacts on living organisms, and control strategies. This review article summarizes the sources of noise; their effects on industrial workers, citizens, and animals; and the value of property in noisy areas. The plethora of literature is showing an increased level of noise in various cities of the world, which have various health consequences such as high blood pressure, insomnia, nausea, heart attack, exhaustion, dizziness, headache, and triggered hearing loss. Apart from humans, noise also affects animal habitat, preying, and reproduction ability; increases heart rate and hearing loss to even death and loss in property value; and impairs the hospital environment. Finally, we have discussed the possible strategies to mitigate the noise problem, policy statements, and regulations to be followed, with future research directions based on the identified research gaps.