Application of QuEChERS method and gas chromatography-mass spectrometry for the analysis of cypermethrin residue in milk

Analytical methods for the isolation and determination of cypermethrin in milk, based on the solid-phase microextraction (SPME) and QuEChERS methods (Quick, Easy, Cheap, Effective, Rugged, and Safe) are presented. The SPME technique was not appropriate to analyse cypermethrin in milk, even establishing the best extraction conditions, polydimethylsiloxane fiber, 60 min time extraction, 60 °C temperature extraction, addition of salt (NaCl) and stirring rate. The extraction efficiency was low probably because of the matrix constituents. The QuEChERS method involves the extraction of the analyte with acetonitrile and simultaneous liquid-liquid partitioning formed by adding anhydrous MgSO(4) plus NaCl, followed by the removal of residual water and cleanup using a procedure called dispersive solid-phase extraction, in which anhydrous MgSO(4) plus PSA and C18 are mixed with 1 mL of acetonitrile extract. The detection and quantification limits were 0.01 and 0.04 mg kg(-1), respectively, and the percentage recovery obtained ranged from 92 to 105% with relative standard deviations below 7%.     

Buffer zone widths for honeybees from ground and aerial spraying of insecticides

The relative field hazards of insecticides to honeybees have been estimated by considering intrinsic toxicity levels and field application rates. This approach is extended here to a consideration of buffer zones downwind of sprayed areas by estimating the distance at which bees would encounter an LD(50) dose from spray drift. 'LD(50) distances' are determined for both ground and aerial spraying of ground crops in Britain using published data on spray deposition under various weather conditions. For ground spraying at low wind speeds (< or =3 m s(-1)), this zone of risk is up to 5 m for the great majority of compounds. Aerial spraying in unstable atmospheric conditions appears to produce drift deposits of about the same order of magnitude as from ground spraying at wind speeds of about 4 m s(-1), with maximum LD(50) distances of < or =40 m for chlorpyrifos, fenitrothion and triazophos. For aerial spraying in stable atmospheric conditions these distances would be much greater. Pieris brassicae larvae are contrasted with honeybees in their relative sensitivities to insecticides and consequent LD(50) distances.     

A risk-based screening approach for prioritizing contaminants and exposure pathways at Superfund sites

Contamination at Superfund sites can involve mixtures of chemicals and radionuclides in a variety of environmental media. Determining priorities for evaluation and remediation of various contaminants is an important part of the initial phases of any site investigation. An effective screening analysis at the beginning of the project can help by identifying both those situations in need of immediate remedial attention and those which require further sampling and evaluation. The screening approach discussed here is made up of two sets of calculations designed to provide upper- and lower-bound estimates of health risk to individuals likely to receive the highest exposures. This approach allows rapid identification of contaminants which pose a negligible risk and can be assigned a low priority for remedial attention or which pose a substantial risk and should be given the highest priority for appropriate remediation efforts. Contaminants designated as neither high- nor low-priority should be investigated in more detail prior to making decisions regarding the need for or method of remediation. The utility of this approach has already been demonstrated in the evaluation of contamination in the Clinch and Tennessee River systems originating from historical operations of atomic weapons and energy research facilities near Oak Ridge, Tennessee.     

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Effects of organic amendments on the reduction and phytoavailability of chromate in mineral soil

In this study, seven organic amendments (biosolid compost, farm yard manure, fish manure, horse manure, spent mushroom, pig manure, and poultry manure) were investigated for their effects on the reduction of hexavalent chromium [chromate, Cr(VI)] in a mineral soil (Manawatu sandy soil) low in organic matter content. Addition of organic amendments enhanced the rate of reduction of Cr(VI) to Cr(III) in the soil. At the same level of total organic carbon addition, there was a significant difference in the extent of Cr(VI) reduction among the soils treated with organic amendments. There was, however, a significant positive linear relationship between the extent of Cr(VI) reduction and the amount of dissolved organic carbon in the soil. The effect of biosolid compost on the uptake of Cr(VI) from the soil, treated with various levels of Cr(VI) (0-1200 mg Cr kg(-1) soil), was examined with mustard (Brassica juncea L.) plants. Increasing addition of Cr(VI) increased Cr concentration in plants, resulting in decreased plant growth (i.e., phytotoxicity). Addition of the biosolid compost was effective in reducing the phytotoxicity of Cr(VI). The redistribution of Cr(VI) in various soil components was evaluated by a sequential fractionation scheme. In the unamended soil, the concentration of Cr was higher in the organic-bound, oxide-bound, and residual fractions than in the soluble and exchangeable fractions. Addition of organic amendments also decreased the concentration of the soluble and exchangeable fractions but especially increased the organic-bound fraction in soil.     

Using Decision Analysis to Choose Phosphorus Targets for Lake Erie

Lake Erie water quality has improved dramatically since the degraded conditions of the 1960s. Additional gains could be made, but at the expense of further investment and reductions in fishery productivity. In facing such cross-jurisdictional issues, natural resource managers in Canada and the United States must grapple with conflicting objectives and important uncertainties, while considering the priorities of the public that live in the basin. The techniques and tools of decision analysis have been used successfully to deal with such decision problems in a range of environmental settings, but infrequently in the Great Lakes. The objective of this paper is to illustrate how such techniques might be brought to bear on an important, real decision currently facing Lake Erie resource managers and stakeholders: the choice of new phosphorus loading targets for the lake. The heart of our approach is a systematic elicitation of stakeholder preferences and an investigation of the degree to which different phosphorus-loading policies might satisfy ecosystem objectives. Results show that there are potential benefits to changing the historical policy of reducing phosphorus loads in Lake Erie.     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.     

Biodegradation kinetics of cymoxanil in aquatic system

A potential method to detoxify pesticides in aquatic system is using bioremediation. In this study, four microorganisms (Pseudomonas sp (EB11), Streptomyces sp. (EB12), Aspergillus niger (EB13) and Trichoderma viride (EB14) were isolated from cucumber leaves previously treated with cymoxanil using enrichment technique. These strains were evaluated for their potential to detoxify cymoxanil in aquatic system at the concentration level of 5×10^?4M. The effect of pH and temperature on the growth ability of the tested strains was also investigated by measuring the intracellular protein and mycelia dry weight for bacterial and fungal strains, respectively. Moreover, the remaining toxicity of cymoxanil after 28 days of incubation with tested strains was evaluated to confirm the complete removal of any toxic materials (cymoxanil and its metabolites). The results showed that the optimum pH for the growth of cymoxanil degrading strains (bacteria and fungi) was 7. A temperature of 30°C appears to be the optimum for the growth of either fungal or bacterial strains. Pseudomonas sp. (EB11) was the most effective strain in cymoxanil degradation followed Streptomyces sp (EB12), Trichoderma viride (EB14) and Aspergillus niger (EB13), with half-lives of 4.33, 9.5, 17.3 and 24.7 days, respectively. The degradation of cymoxanil by bacterial strains was much faster than fungal one. There is no remaining toxicity of cymoxanil detected in aqueous media previously treated with Pseudomonas sp. (EB11) for 28 days. The results suggest that bioremediation by Pseudomonas sp. (EB11) are promising for the detoxification of cymoxanil in aqueous media.