企业逆向物流与循环经济立法之联系

逆向物流给企业带来效益的同时,也带来了生态物流的理念.逆向物流涉及了经济与生态环境两大系统,显现出了自身的特点与积极因素.逆向物流充分体现了循环经济发展之宗旨.加速循环经济的立法,并以相应立法来推动企业尽快实施物流活动是至关重要的.     

基于突发事件机理分析的风险评估方法研究及应用

近年来,我国部分城市开展了城市安全风险评估工作。为了能够得到科学的风险评估方法和有效的结果,本文基于突发事件机理分析及单一事件链,对城市安全风险评估方法进行了研究及应用。通过引入控制因子,构建基于突发事件机理分析的单一事件链模型,并将该模型转化为风险评估工作的指标体系,并将该指标体系在某区城市安全风险评估工作中进行了应用,对该区17种单位或场所,涉及到的18类风险,共计201家企业进行风险级别评估。最终得出该区17种单位或场所中每种单位或场所的整体风险等级,以及重大风险数量的占比情况,为该区提出有针对性的风险管控意见奠定了一定基础,并对本文的局限性和下一步研究方向提出一些看法和意见。     

脉冲袋式除尘器技术优化及其效应

本文探讨了传统脉冲袋式除尘器技术优化问题,提出了除尘器大灰斗、长滤袋、跳跃式清灰等技术优化措施;工程应用表明,技术优化可带来节能、减少投资、节约占地、降低运行费用等积极效果,可为袋式除尘器设计和应用提供借鉴。     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Biodegradable microplastics (BMPs): a new cause for concern?

Environmental Science and Pollution Research - With the increasingly serious pollution of plastics, biodegradable plastics (BDPs) have attracted attention as a new material that can replace...     

Sugarcane monoculture drives microbial community composition,activity and abundance of agricultural-related microorganisms

Environmental Science and Pollution Research - Sugarcane monoculture (SM) often leads to soil problems, like soil acidification, degradation, and soil-borne diseases, which ultimately pose a...     

Metal distribution characteristic of MSWI bottom ash in view of metal recovery

Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.     

多相流中细长颗粒数值模拟研究综述

纤维干燥尾气中的飞灰含有大量的木质纤维、砂光粉和其他粉尘。从形状来看,木质纤维属细长颗粒,和研究较为成熟的球形颗粒在许多方面存在较多差异。目前,国内外学者们已对细长颗粒在多相流中的悬浮、沉降及流化方面开展了大量数值模拟研究,取得了一定的进展;在此基础上,继续完善木质纤维的运动特征、推导出其在换热器表面的碰撞沉积模型是下一步的主要工作。     

京津冀区域燃煤发电行业大气污染物排放时空变化特征研究

为了科学评估京津冀区域燃煤发电行业特别排放限值和超低排放相关要求实施后的大气污染物减排效果,以行业调查数据为基础,建立了2013年和2015年京津冀区域燃煤发电行业大气污染物排放清单,分析了装机容量与SO_2、NO_x和烟尘排放量的时空耦合关系,讨论了国家相关政策和标准的实施效果。结果显示:区域内2015年燃煤机组装机容量与2013年相比略有下降,SO_2、NO_x和烟尘排放量分别下降75.95%、83.09%和71.20%,减排效果明显。2015年100 MW以下等级机组3种污染物排放总量位居各机组首位,建议通过多种合理方式压减小型燃煤发电机组数量和排放浓度。     

β射线法与重量法监测环境空气PM_(2.5)的应用比较

重量法是测量PM_(2.5)的传统手工经典方法,而β射线法加动态加热系统联用光散射法作为自动在线监测技术的常用方法被广泛使用。将5030-SHARP型β射线法加动态加热系统联用光散射法PM_(2.5)自动监测设备监测结果与手工法测量结果进行比对、分析,结果表明:β射线法与重量法监测结果具有一致性,测量结果不存在显著性差异;β射线法与重量法相对偏差值与温度、相对湿度、风速等气象因子的相关性不明显;β射线法与重量法监测结果的差异性与PM_(2.5)质量浓度、季节等条件有关;随着PM_(2.5)质量浓度逐渐升高,β射线法与重量法相对偏差的绝对值|RD|也随之增大,不同季节的|RD|平均值差异较大,春季、冬季的|RD|平均值大于夏季、秋季。