In vitro studies of the submerged angiospermRuppia maritima: Auxin and cytokinin effects on plant growth and development

Axenic tissue cultures ofRuppia maritima L. were established and propagated clonally in vitro from terminal rhizome segments collected from Tampa Bay, Florida, USA. Cultures were maintained in a base medium consisting of synthetic seawater supplemented with half-strength Murashige and Skoog salts and 1% sucrose at pH 5.6. The effects of five cytokins [6-furfurylaminopurine (kinetin), 6-benzylaminopurine (BAP), 2-isopentyladenine (2iP), 6-(4-hydroxy-3-methyl-but-2-enylamino) purine (zeatin), andn-phenyl-n-1,2,3-thidiazol-5yl urea (thidiazuron)] and one auxin [napthalene acetic acid (NAA)] on explant growth and development were investigated. Cytokinin additions resulted in a 3- to 4-fold increase in nodal production, branching, and biomass ofR. maritima after 12 wk in culture. Cultures responded in a dose-dependent manner to 2iP but exhibited broad dose-response curves to kinetin, BAP, zeatin, and thidiazuron. NAA addition resulted in increased leaf and internodal lengths, but reduced the number of leaves per node and the rhizome biomass. The addition of NAA almost completely suppressed root growth in media without cytokinins and had an antagonistic effect on nodal production and branching in cytokinin-supplemented media.     

A comparison of (Pb, Cd and Zn) accumulation in terrestrial slugs maintained in microcosms: evidence for metal tolerance

The relative tissue accumulation of Pb, Cd and Zn were compared in two populations each of two species of slugs (Arion subfuscus and Deroceras reticulatum). One population was resident at a contaminated Pb/Zn mine site, and the other population was from an uncontaminated site and was transferred for 20 days to microcosms established at the mine site. It was found that when the experiment was conducted during late spring (May), but not in late winter (February), that the Pb and Zn concentrations in the tissues of the 'transplants', were significantly higher than in the tissues of 'residents'; the Cd concentrations in the transplants, although significantly higher in the May sample than in February, did not exceed those of their 'resident' counterparts. It was postulated that: (a) Pb and Zn tolerance in slugs is phenotypically expressed by a reduction in metal accumulation; (b) Cd tolerance, if present, may be characterized by enhanced storage capacity; and (c) the presence of local metal-tolerant ecotypes is a biotic variable that may confound the relationship between dry tissue and environmental metal concentrations that forms a basis of pollution biomonitoring.     

Impact of sulphur dioxide exposure on conidial germination of powdery mildew fungi

The impact of sulphur dioxide, in two different concentrations (286 microg m(-3) and 571 microg m(-3)) for various exposure periods, on conidial germination of some powdery mildew fungi was investigated in artificial treatment conditions. SO(2) in general was inhibitory for conidial germination of all the studied powdery mildew fungi and the species did not differ much from each other in their sensitivity to SO(2). The per cent conidial germination was increasingly inhibited with an increase in the concentration of SO(2). The concentration of SO(2) and the exposure period were important determinants of the inhibitory effect.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

Reduction and avoidance of lubricant mist demands an integrated assessment approach

A case study to identify major factors for lubricant mist exposure covered 15 metal machining sites. The investigation included milling, turning, drilling and grinding applications. Systematic analysis considered all relevant data concerning the machine tool, the lubricant and the suction plant. The efficiency of the implemented maintenance program at the installed filter systems was checked by concentration measurements immediately before and after service. All performed measurements of lubricant aerosol and vapor loads upstream and downstream of the installed filter systems were carried out according to VDI 2066 and BIA 3110, respectively. The selection criteria for the sites to be investigated, the systematic nature of the data acquisition and the procedure of the analysis are demonstrated in detail by performing comparisons between selected applications using emulsions and those employing straight oil for lubrication. The results of the study identify recirculation of ventilated air as the major source of workplace exposure to airborne lubricant emissions. More than 60% of the demisters investigated emit air at total lubricant loads (aerosols and vapor) above the limit of 20 mg m-3 at any time of operation; which also means immediately after service. A common reason for exceeded aerosol loads in recirculated air is e.g. the fact that the type of filter system applied is often not suitable for the separation problem. Loads of lubricant vapor are usually higher at the processes which use water emulsions as lubricant. In a quarter of the cases the limits were exceeded solely due to high vapor loads even immediately after service. The exposure can be reduced by replacing the lubricant, installation of a vapor separation plant or avoiding air recirculation. Maintenance time of the demisting system and aerosol separation efficiency of state-of-the-art demisting systems can be expanded by implementation of enhanced preliminary filter stages. This study confirms that appropriate service measures lower both aerosol emissions and lubricant vapor concentrations due to the reduction of exposed oil-wetted surfaces. The performed measurements show no significant relationship between loads of airborne lubricants and the type of machining process. Therefore, investigations at a much more detailed level have to be performed. However, the individual assessment of any workplace due to the complex situation remains essential.     

Analysis of pollutant levels in central Hong Kong applying neural network method with particle swarm optimization

Air pollution has emerged as an imminent issue in modernsociety. Prediction of pollutant levels is an importantresearch topic in atmospheric environment today. For fulfillingsuch prediction, the use of neural network (NN), and inparticular the multi-layer perceptrons, has presented to be acost-effective technique superior to traditional statisticalmethods. But their training, usually with back-propagation (BP)algorithm or other gradient algorithms, is often with certaindrawbacks, such as: 1) very slow convergence, and 2) easilygetting stuck in a local minimum. In this paper, a newlydeveloped method, particle swarm optimization (PSO) model, isadopted to train perceptrons, to predict pollutant levels, andas a result, a PSO-based neural network approach is presented. The approach is demonstrated to be feasible and effective bypredicting some real air-quality problems.     

Classification of local- and landscape-scale ecological types in the southern Appalachian Mountains

Five local ecological types based on vegetative communities and two landscape types based on groups of communities, were identified by integrating landform, soil, and vegetation components using multivariate techniques. Elevation and several topographic and soil variables were highly correlated with types of both scales. Landscape ecological types based only on landform and soil variables without vegetation did not correspond with types developed using vegetation. Models developed from these relationships could allow classification and mapping of extensive areas using geographic information systems.     

Reduction of SO2 emissions by ammonia gas during unstaged combustion

The reduction of SO₂ by the addition of ammonia gas has been studied in a 2 m high fluidized bed combustor having a 30 cm static bed height and a freeboard height of 170 cm. Ammonia gas was injected at 52 cm above the distributor where the temperature is ca. 700° C by an uncooled stainless steel tube injector. Experiments were carried out to investigate the effects of amminia gas injection on sulphur dioxide emissions at unstaged conditions of: (i) excess air level, (ii) NH₃:SO₂ molar ratio, (iii) fluidizing velocity and (iv) bed height.A maximum reduction of 75% in SO₂ emissions was found at 40% excess air, at an NH₃:SO₂ molar ratio of 5.4. The onset of SO₂ reduction occurred at an NH₃:SO₂ ratio of 1.5 However, the most effective ratio was found to be between 3 and 5. Fluidizing velocity and bed height were also found to have significant influence on SO₂ reduction.It is difficult to determine how the SO₂ reduction varied with operating conditions. When ammonia is added in the main combustor zone, the temperature is much higher than that required for the occurrence of sulphur dioxide-ammonia and sulphur trioxide-ammonia reactions. However, this paper points out the significance of ammonia addition in the reduction of sulphur dioxide.     

Environmental and biological monitoring of methyl ethyl ketone (MEK)

This study was conducted to evaluate the usefulness of various biological parameters for monitoring of workers exposed to methyl ethyl ketone (MEK). Fifty male workers from a large magnetic videotape factory participated in this study. Personal air samples were collected using 3M organic vapor monitors and analysed for MEK by gas chromatography with flame ionisation detector (FID). 10 mL of urine; blood (1 mL) and exhaled air were also collected at the end of an 8-hour workshift. The headspace GC method was applied for measurement of urinary and blood MEK. MEK in expired air was analysed directly by using a GC/FID.The correlation coefficients (r) between environmental MEK and all other biological parameters measured show significant positive relationships. The r for environmental MEK and urine MEK was 0.84; for blood 0.73 and for breath 0.64. The correlation coefficients between blood and urine was 0.72; blood and breath was 0.88 and urine and breath 0.60. These findings suggest that measurements of unmetabolised MEK in blood, exhaled air and urine can be used for biological monitoring of MEK exposure. Nevertheless, laboratory methodological assessment is in favour of measuring urinary MEK as it is non-invasive and does not have to be analysed immediately after collection.