开发建设中生态保护与恢复标准的技术要求及其确定方法初探

在阐述开发建设中生态保护与恢复标准的技术要求涵义和构成要素的基础上,对其规定方式和确定要求的工作程序、原则与方法进行了探讨。技术要求的规定方式包括定量方式和定性方式,其中定量方式又包括规定指标限值、规定指标限值的计算方法、规定参照系和规定指标的设计保证率4种。技术要求的确定可按如下程序进行：（1）分析开发建设活动的技术环节;（2）分析开发建设活动的生态影响;（3）确定生态保护与恢复主题;（4）确定生态保护与恢复的技术要求。确定技术要求时,应遵循以下原则：（1）技术和经济因素相结合;（2）体现自然地理条件的差异;（3）考虑历史情况。技术要求的确定可以有以下5种方法：（1）实践经验与科学试验总结法;（2）借鉴相关标准法;（3）借鉴国外同类标准法;（4）推理分析法;（5）基于生态质量要求的理论计算法。     

絮凝剂PAN-DCD与甲基橙相互作用中的热力学研究

用平衡渗析法研究了有机高分子絮凝剂ＰＡＮ－ＤＣＤ与甲基橙（ＭＯ）在２０,２５,３０,３５℃下相互作用的热力学,求得结合常数Ｋ和热力学参数△Ｇ,△Ｈ,△Ｓ,在对不同絮凝剂结构进行表征的基础上,探讨了不同ＰＡＮ,ＤＣＤ配比对合成的絮凝剂与ＭＯ相互作用的影响,结果表明：ＰＡＮ－ＤＣＤ与ＭＯ的相互作用中能量作用是主要的：随ＰＡＮ与ＤＣＤ的比值增大,合成的絮凝剂ＰＤ１,ＰＤ２,ＰＤ３在常温下与ＭＯ的结合程试     

基于模糊综合评价的流域社会经济活动对太湖生态影响评价研究

太湖是我国的五大淡水湖之一。太湖流域是我国经济最发达、水污染最严重的地区之一,正面临着严重的环境问题。随着太湖流域社会经济的发展,太湖流域生态环境将承受更大的压力。因此,分析人类社会经济活动对太湖流域生态的影响,对研究太湖生态环境具有重要意义。采用系统分析的方法,围绕流域人类社会经济活动对湖泊生态安全的影响,建立湖泊生态安全的评价指标体系,利用层次分析法计算各指标因子的权重。在此基础上,以太湖流域2005年和2006年相关数据为依据,以MATLAB为工具,根据模糊数学的原理,利用多级模糊综合评价的方法对太湖进行生态综合评价,确定流域社会经济活动对整个湖泊生态系统的影响。研究结果表明,3个重要指数得分高低顺序依次为：水体环境状态指数＞水体污染负荷指数＞社会经济压力指数;除了点源污染以外,面源污染也是太湖流域生态环境问题的重要根源。     

热液成矿流体中的有机物质

热液流体中的主要有机质包括腐殖物质（t＜50℃）、有机羧酸（t＝80～140℃）、原油（120～180℃）和水溶性甲烷气（180～300℃）。腐殖物质在初始矿源层形成中起重要作用，在腐殖酸缩合成干酪根过程中通过去氧而导致还原的成岩环境，从而有效地防止金属元素在初始矿源石化过程中的分散。有机羧酸是干酪很早期演化的必然产物，富含有机羧酸的油田卤水可以成为MVT铅锌矿的成矿流体。在一定成熟度范围内原油可能成为汞金热液流体的重要有机组分。水溶性甲烷气是铜、铀、金等中低温热液流体的重要有机组分。有机质演化的阶段性决定了相应热液流体中有机质的类型；此外沉积建造的类型、金属元素在油／卤之间分配系数差异和构造条件差异导致了金属矿化分异。     

Identifying water resources management strategies in adaptation to climate change under uncertainty

In this study, an integrated simulation-based allocation modeling system (ISAMS) is developed for identifying water resources management strategies in response to climate change. The ISAMS incorporates global climate models (GCMs), a semi-distributed land use-based runoff process (SLURP) model, and a multistage interval-stochastic programming (MISP) approach within a general framework. The ISAMS can not only handle uncertainties expressed as probability distributions and interval values but also reveal climate change impacts on water resources allocation under different projections of GCMs. The ISAMS is then applied to the Kaidu-kongque watershed with cold arid characteristics in the Tarim River Basin (the largest inland watershed basin in China) for demonstrating its efficiency. Results reveal that different climate change models corresponding to various projections (e.g., precipitation and temperature) would lead to changed water resources allocation patterns. Variations in water availability and demand due to uncertainties could result in different water allocation targets and shortages. A variety of decision alternatives about water allocations adaptive to climate change are generated under combinations of different global climate models and ecological water release plans. These findings indicate that understanding the uncertainties in water resources system, building adaptive methods for generating sustainable water allocation patterns, and taking actions for mitigating water shortage problems are key adaptation strategies responding to climate change.     

高温固硫反应中锶化合物的促进作用

本文论述了锶化合物在高温燃烧条件下固硫反应的促进作用，通过Ｘ－射线粉晶衍射及扫描电镜的研究，证明形成含硫酸钙的复合盐的生成是提高固硫率的关键，用该方法制成的工业型煤，在实际锅炉中试烧其固硫率可达７０％，是烟气排烟脱硫的有效方法之一，对净化大气，减少污染有现实意义。     

广州夏季办公室内细颗粒中多环芳烃污染特征研究

大部分的都市办公人群每天在办公室至少度过8 h。而室外环境的渗透、办公室内吸烟、办公设备使用和中央通风系统均可能导致细颗粒物及多环芳烃(PAHs)在室内积聚而造成微环境污染。2015年5—6月,在广州市3种不同功能区(商住区、高新产业区、工业区)共选取了14间不同类型的办公室,对其室内外PM_(2.5)和多环芳烃进行同步监测。结果表明,(1)14间中有12间办公室内的PM_(2.5)浓度水平高于世界卫生组织(WHO)的推荐值25μg·m-3;(2)与国内外类似研究相比,办公室内外∑16PAHs及Ba P-eq的监测浓度水平均较低,并呈现一致规律:文印>室外>吸烟>多人>单人>无窗(无人),其中Ba P-eq低于欧盟规定的安全限值1 ng·m-3;(3)文印工作和吸烟行为与室内PM_(2.5)和PAHs浓度升高有密切关系,分别对5环和4环PAHs贡献明显;(4)其他无明显内源的办公室的细颗粒中PAHs污染在监测期间主要来源于室外贡献。     

嘉兴市水污染源解析及等标污染负荷评价

研究水环境污染的主要来源及主要污染物,对于区域水污染治理具有重要意义。本文通过分析嘉兴市各类污染物入河量,以及污染物等标排放量的计算,得出了嘉兴市水环境污染的主要污染物和主要污染源。结果表明,嘉兴市面源污染物的入河量大于点源,畜禽养殖是面源污染的主要来源,也是总磷的主要来源。点污染的主要来源是城镇生活,其中,桐乡市污染物入河量最大,各区县的污染物入河量总体服从桐乡市﹥南湖区﹥嘉善县﹥平湖市﹥海宁市﹥秀洲区﹥海盐县的分布。等标污染负荷的方法显示：嘉兴市的主要污染源是畜禽养殖、城镇生活和农田;总氮、氨氮和总磷为主要污染物。     

Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, with y = 0.194x + 7.859, and a correlation coe cient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%–12.8% and inter-day RSD of 8.4%–15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.     

Production of a newly isolated Paenibacillus polymyxa biocontrol agent using monosodium glutamate wastewater and potato wastewater

A phyllosphere bacterial strain EBL-06 was isolated from wheat leaves. The morphology, cultural characteristics, phospholipid fatty acids, physiological and antagonistic fungus activities of this strain were investigated. A phylogenetic tree was constructed by comparing with the published 16S rDNA sequences of the relevant bacteria. The results showed that the isolate EBL-06 was a strain of Paenibacillus polymyxa; this strain performed a high level of antagonistic fungus activity toward a broad spectrum of phytopathogens, such as Botrytis cinerea, Cladosporium cucumerinum, Fusarium spp. The isolate EBL-06 can grow well using monosodium glutamate wastewater (MGW) and potato wastewater (PW) as culture medium. The maximum yield of 6.5 × 10 9 CFU/mL of the isolate EBL-06 anti-fungus biocontrol agent was reached in 15 hr cultivation at 28°C, pH 6.0–7.5 using the mixture of MGW and PW (1:9).