CHEMISTRY OF COALBED METHANE DISCHARGE WATER INTERACTING WITH SEMI‐ARID EPHEMERAL STREAM CHANNELS1

ABSTRACT: The objective of this study was to examine the chemistry of Coalbed Methane (CBM) discharge water reacting with semi‐arid ephemeral stream channels in the Powder River Basin, Wyoming. The study area consisted of two ephemeral streams: Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, the pH and electrical conductivity (EC) were measured in the field. Samples were transported to the laboratory and analyzed for alkalinity, major cations, and anions. From the measurement of sodium (Na), calcium (Ca), and magnesium (Mg), practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated. Results suggest pH and EC of CBM discharge water was 7.1 and 4.3 dS/m, respectively. The CBM discharge water consisted of higher concentrations of sodium and alkalinity compared to other components. The pH of CBM discharge water increased significantly (p = 0.000) in the downstream channel of Burger Draw from 7.1 to 8.84 before it joined with the Powder River. Dissolved calcium concentration of CBM discharge water decreased significantly (p = 0.000) in the downstream channel water. Subsequently, SARp increased approximately from 24 to 29. The SARt also increased significantly (p = 0.001) in the downstream channel water. For instance, SARt of CBM discharge water increased from 32.93 to 45.5 downstream channels after the confluence of Sue Draw with the Burger Draw. The only significant difference in water chemistry above and below the confluence of Burger Draw with the Powder River was pH, which increased from 8.36 to 8.52. The significant increase in SAR values of CBM discharge water in Burger Draw and Sue Draw tributaries suggest a careful monitoring of salinity and sodicity is needed if CBM discharge water is used for irrigation in semi‐arid environments. Results discussed in this study will be useful to downstream water users who depend on water for irrigation.     

Comparison of EDTA-enhanced phytoextraction and phytostabilisation strategies with Lolium perenne on a heavy metal contaminated soil

Phytoremediation is a promising and cost-effective strategy to manage heavy metal polluted sites. In this experiment, we compared simultaneously phytoextraction and phytostabilisation techniques on a Cd and Zn contaminated soil, through monitoring of plant accumulation and leaching. Lolium perenne plants were cultivated for 2 months under controlled environmental conditions in a 27.6 dm³-pot experiment allowing the collect of leachates. The heavy metal phytoextraction was promoted by adding Na-EDTA (0.5 g kg⁻¹ of soil) in watering solution. Phytostabilisation was assessed by mixing soil with steel shots (1%) before L. perenne sowing. Presence of plants exacerbated heavy metal leaching, by improving soil hydraulic conductivity. Use of EDTA for phytoextraction led to higher concentration of heavy metal in shoots. However, this higher heavy metal extraction was insufficient to satisfactory reduce the heavy metal content in soil, and led to important heavy metal leaching induced by EDTA. On the other hand, addition of steel shots efficiently decreased both Cd and Zn mobility, according to 0.01 M CaCl₂ extraction, and leaching. However, improvement of growth conditions by steel shots led to higher heavy metal mass in shoot tissues. Therefore, soil heavy metal mobility and plant metal uptake are not systematically positively correlated.     

Aggressions and size-related fecundity of queenless workers in the ant <Emphasis Type="Italic">Cataglyphis cursor</Emphasis>

In social hymenoptera, the reproductive division of labor is often linked to differences in individual body size with the reproductive caste (the queen) being larger than the workers. Likewise, the reproductive potential may vary with size within the worker caste and could affect the evolution of worker size in social insects. Here, we tested the relationship between worker size and reproductive potential in the facultative parthenogenetic ant Cataglyphis cursor. Colonies are headed by a multiply mated queen, but workers can produce gynes (virgin queens) and workers by thelytokous parthenogenesis after the queen's death. We observed the behaviour of workers (n = 357) until the production of gynes (212 h over 3 months) in an orphaned colony (mated queen not present). The size of workers was measured, and their paternal lineage determined using six microsatellite markers, to control for an effect of patriline. Larger workers were more likely to reproduce and lay more eggs indicating that individual level selection could take place. However, paternal lineage had no effect on the reproductive potential and worker size. From the behavioural and genetic data, we also show for the first time in this species, evidence of aggressive interactions among workers and a potential for nepotism to occur in orphaned colonies, as the five gynes produced belonged to a single paternal lineage.     

COALBED METHANE PRODUCT WATER CHEMISTRY IN THREE WYOMING WATERSHEDS1

ABSTRACT: The Powder River Basin in Wyoming has become one of the most active areas of coalbed methane (CBM) development in the western United States. Extraction of methane from coalbeds requires pumping of aquifer water, which is called product water. Two to ten extraction wells are manifolded into one discharge point and product water is released into nearby unlined holding ponds. The objective of this study was to evaluate the chemistry, salinity, and sodicity of CBM product water at discharge points and associated holding ponds as a function of watershed. The product water samples from the discharge points and associated holding ponds were collected from the Cheyenne River (CHR), Belle Fourche River (BFR), and Little Powder River (LPR) watersheds during the summers of 1999 and 2000. These samples were analyzed for pH, electrical conductivity (EC), total dissolved solids (TDS), alkalinity, sodium (Na), calcium (Ca), magnesium (Mg), potassium (K), sulfate (SO₄^2‐), and chloride (C^1‐). From the chemical data, practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated for the CBM discharge water and pond water. The pH, EC, TDS, alkalinity, Na, Ca, Mg, K, SARp, and SARt of CBM discharge water increased significantly moving north from the CHR watershed to the LPR watershed. CBM discharge water in associated holding ponds showed significant increases in EC, TDS, alkalinity, Na, K, SARp, and SARt moving north from the CHR to the LPR watershed. Within watersheds, the only significant change was an increase in pH from 7.21 to 8.26 between discharge points and holding ponds in the LPR watershed. However, the LPR and BFR exhibited larger changes in mean chemistry values in pH, salinity (EC, TDS), and sodicity (SAR) between CBM product water discharges and associated holding ponds than the CHR watershed. For instance, the mean EC and TDS of CBM product water in LPR increased from 1.93 to 2.09 dS/m, and froml,232 to 1,336 mg/L, respectively, between discharge and pond waters. The CHR exhibited no change in EC, TDS, Na, or SAR between discharge water and pond water. Also, while not statistically significant, mean alkalinity of CBM product water in BFR and LPR watersheds decreased from 9.81 to 8.01 meq/L and from 19.87 to 18.14 meq/L, respectively, between discharge and pond waters. The results of this study suggest that release of CBM product water onto the rangelands of BFR and LPR watersheds may precipitate calcium carbonate (CaCO₃) in soils, which in turn may decrease infiltration and increase runoff and erosion. Thus, use of CBM product water for irrigation in LPR and BFR watersheds may require careful planning based on water pH, EC, alkalinity, Na, and SAR, as well as local soil physical and chemical properties.     

Cruel Wars and Safe Havens: Humanitarian Aid in Liberia 1989–1996

This article considers the role of military intervention by peace-keeping and peace-enforcement troops in the provision of humanitarian aid to Liberia during the armed conflicts of the past seven years. The article focuses on the role of the de facto safe haven which peace-keeping and enforcing troops protected in Liberia between 1990 and 1996 and puts the Liberian case in the context of the growing debate about the usefulness of military interventions in humanitarian emergencies. It argues that the safe haven has enabled significant humanitarian acheivements but has also demonstrated fundamental failures. Central to these failures have been the absence of consent, under-resourcing and a loss of control of the safe haven to factional interests.     

A general kinetic law for heavy metal vaporization during municipal solid waste incineration

Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste.     

Laboratory investigation of <Emphasis Type="Italic">Fallopia</Emphasis> × <Emphasis Type="Italic">bohemica</Emphasis> fruits dispersal by watercourses

Seed and fruit dispersal along watercourses favours the long-distance migration of invasive species, not only for aquatic or wetland species, but also for terrestrial wind-dispersed plants, like the Japanese knotweed. The present paper aims at investigating the role of watercourses in the dispersal of the knotweed due to its frequent occurrence on riverbanks and production of fertile achenes (type of fruit of the Japanese knotweed). This dispersal occurs along two steps after the fruits deposit on the water surface: floatation first and then sinking towards the bottom of the watercourse. Regarding the first step, the effects of agitation of the water, temperature, surface tension and luminosity on the achenes floatability are experimentally studied. While no influence of luminosity is observed, an increase of temperature greatly decreases the floating time. Floating time also decreases as the contact between water and the fruit is enhanced (through submersion of achenes, agitation of the water or lower surface tension). Regarding the second step, the fall velocity of the fruits in water at rest is measured and appears to be independent of the seed history (floating time). 3D helical motions are systematically observed with constant tangential velocity with respect to the falling velocity. The trajectory of the fruits in a shear flow is then measured and the evolution of their velocity components along the sinking process is discussed. Finally, the contribution of both steps to the long-distance migration of the seeds is estimated.