Making carbon sequestration a paying proposition

Atmospheric carbon dioxide (CO₂) has increased from a preindustrial concentration of about 280 ppm to about 367 ppm at present. The increase has closely followed the increase in CO₂ emissions from the use of fossil fuels. Global warming caused by increasing amounts of greenhouse gases in the atmosphere is the major environmental challenge for the 21st century. Reducing worldwide emissions of CO₂ requires multiple mitigation pathways, including reductions in energy consumption, more efficient use of available energy, the application of renewable energy sources, and sequestration. Sequestration is a major tool for managing carbon emissions. In a majority of cases CO₂ is viewed as waste to be disposed; however, with advanced technology, carbon sequestration can become a value-added proposition. There are a number of potential opportunities that render sequestration economically viable. In this study, we review these most economically promising opportunities and pathways of carbon sequestration, including reforestation, best agricultural production, housing and furniture, enhanced oil recovery, coalbed methane (CBM), and CO₂ hydrates. Many of these terrestrial and geological sequestration opportunities are expected to provide a direct economic benefit over that obtained by merely reducing the atmospheric CO₂ loading. Sequestration opportunities in 11 states of the Southeast and South Central United States are discussed. Among the most promising methods for the region include reforestation and CBM. The annual forest carbon sink in this region is estimated to be 76 Tg C/year, which would amount to an expenditure of $11.1–13.9 billion/year. Best management practices could enhance carbon sequestration by 53.9 Tg C/year, accounting for 9.3% of current total annual regional greenhouse gas emission in the next 20 years. Annual carbon storage in housing, furniture, and other wood products in 1998 was estimated to be 13.9 Tg C in the region. Other sequestration options, including the direct injection of CO₂ in deep saline aquifers, mineralization, and biomineralization, are not expected to lead to direct economic gain. More detailed studies are needed for assessing the ultimate changes to the environment and the associated indirect cost savings for carbon sequestration.     

Reduction of mercury emissions from anthropogenic sources including coal combustion

Mercury(Hg)ranks number three,after arsenic(As)and lead(Pb),on the Substance Priority List of the Agency for Toxic Substances and Disease Registry(ATSDR,2019).M...     

Diffusion of ISO 14001 environmental management systems in China: rethinking on stakeholders’ roles

Since the release of ISO 14001 in 1996, China has witnessed a surge in the number of ISO 14001 certification. As an international environmental standard, ISO 14001 has two basic functions: one is playing as an environmental management instrument, while the other as a signal of firms’ better environmental performance to stakeholders. Based on the stakeholder theory, we have examined the effects of community, regulatory and some organizational stakeholders on the diffusion of ISO 14001 certification at Chinese provincial levels. Using a panel data of ISO 14001 certification from each province for the period of 2004-2008 in China, empirical evidence of such relations is found. The finding reveals that signaling to foreign customers and community stakeholders plays a dominant role in encouraging diffusion of ISO 14001 certification. However, as an important organizational stakeholder, foreign investors have shown no significant effect on the diffusion of ISO 14001 in China.     

Storage and dynamics of carbon and nitrogen in soil after grazing exclusion in Leymus chinensis grasslands of northern China

Land-use change can lead to changes in soil carbon (C) and nitrogen (N) storage. This study aimed to determine the impact of long-term grazing exclusion (GE) on soil organic C and total N (TN) storage in the Leymus chinensis grasslands of northern China and to estimate the dynamics of recovery after GE. We investigated the aboveground biomass and soil organic C and TN storage in six contiguous plots along a GE chronosequence comprising free grazing, 3-yr GE, 8-yr GE, 20-yr GE, 24-yr GE, and 28-yr GE. Grazing exclusion for two decades increased the soil C and N storage by 35.7 and 14.6%, respectively, in the 0- to 40-cm soil layer. The aboveground net primary productivity and soil C and N storage were the highest with 24-yr GE and the lowest with free grazing. The storage increased logarithmically with the duration of GE; after an initial rapid increase after the introduction of GE, the storage attained equilibrium after 20 yr. A logarithmic regression analysis revealed 86.8 and 87.1% variation in the soil C storage and 74.2 and 80.7% variation in the soil N storage in the 0- to 10-cm and 0- to 40-cm soil layers, respectively. Based on these results, we suggest that two decades of GE would restore the L. chinensis grasslands from being lightly degraded to a stable productive condition with good soil C and N storage capacity. Our results demonstrated that by implementing GE, the temperate grasslands of northern China could facilitate significant C and N storage on decade scales in the context of mitigating global climate change.     

Amelioration of alkali soil using flue gas desulfurization byproducts: productivity and environmental quality

In this study, flue gas desulfurization (FGD) byproducts are used to ameliorate alkali soil. The average application rates for soils with low exchangeable sodium percentage (ESP), mid ESP, and high ESP are 20.9, 30.6, and 59.3 Mg ha(-1), respectively. The experimental results obtained for 3 consecutive years reveal that the emergence ratios and yields of the crops were 1.1-7.6 times and 1.1-13.9 times those of the untreated control, respectively. The concentrations of Cr, Pb, Cd, As, and Hg in the treated soils are far below the background values stipulated by the Environmental Quality Standard for Soils (GB15618-1995). Their concentrations in the seeds of corn and alfalfa grown in the treated soils are far below the tolerance limits regulated by National Food Standards of China. The results of this research demonstrate that the amelioration of alkali soils using FGD byproducts is promising.     

Study on transfers of uranium, thorium and decay products from grain, water and soil to chicken meat and egg contents

Activity concentrations of the uranium and thorium series radionuclides were determined in chicken meat and eggs as well as in soil, water and other dietary intakes of poultry at five sites of the French territory. These data allow the calculation of transfer coefficients which enrich the database given by the technical report series no. 472 of the IAEA. In egg contents, the highest activity concentrations (in mBq kg(-1) fresh weight) are for (226)Ra, ranging between 136 and 190 and are much lower for uranium (between 0.51 and 1.30 for (238)U). In chicken meat, (238)U activity concentration is higher than in egg contents and ranges between 1.7 and 9.7. Concerning (232)Th, its activity concentration is lower than uranium and ranges between 0.5 and 4.9. Daily ingested activity concentration by the animals was assessed taking into account the activity concentrations measured in the grains, in the soil and in the drinking water. The activity concentration in grains and the daily intakes allow the calculation of concentration ratios and transfer coefficients for chicken meat and egg contents. In chicken meat the transfer coefficients (d kg(-1)) range between 0.0018 and 0.0073 for (238)U and between 0.0008 and 0.0028 for (232)Th. In egg contents they range from 0.00018 to 0.0018 for (238)U and are much higher for radium isotopes (0.10-0.23 for (226)Ra and 0.07-0.11 for (228)Ra).     

Indoor particle dynamics in a school office: determination of particle concentrations,deposition rates and penetration factors under naturally ventilated conditions

Recently, the problem of indoor particulate matter pollution has received much attention. An increasing number of epidemiological studies show that the concentration of atmospheric particulate matter has a significant effect on human health, even at very low concentrations. Most of these investigations have relied upon outdoor particle concentrations as surrogates of human exposures. However, considering that the concentration distribution of the indoor particulate matter is largely dependent on the extent to which these particles penetrate the building and on the degree of suspension in the indoor air, human exposures to particles of outdoor origin may not be equal to outdoor particle concentration levels. Therefore, it is critical to understand the relationship between the particle concentrations found outdoors and those found in indoor micro-environments. In this study, experiments were conducted using a naturally ventilated office located in Qingdao, China. The indoor and outdoor particle concentrations were measured at the same time using an optical counter with four size ranges. The particle size distribution ranged from 0.3 to 2.5 μm, and the experimental period was from April to September, 2016. Based on the experimental data, the dynamic and mass balance model based on time was used to estimate the penetration rate and deposition rate at air exchange rates of 0.03–0.25 h^?1. The values of the penetration rate and deposition velocity of indoor particles were determined to range from 0.45 to 0.82 h^?1 and 1.71 to 2.82 m/h, respectively. In addition, the particulate pollution exposure in the indoor environment was analyzed to estimate the exposure hazard from indoor particulate matter pollution, which is important for human exposure to particles and associated health effects. The conclusions from this study can serve to provide a better understanding the dynamics and behaviors of airborne particle entering into buildings. And they will also highlight effective methods to reduce exposure to particles in office buildings.     

Experimental and numerical investigation of density current over macro-roughness

The dynamics of density current over a bottom covered by macro-roughness elements were investigated by laboratory experiments and a computational model using large eddy simulations. The macro-roughness considered had significant size in comparison with the scale of density current. Five different roughness conditions were considered, namely flat bottom (for reference), half spheres, fine gravels, medium gravels, and large gravels. These bottom conditions had variations in roughness element size, shape, angularity, and spatial configuration. The density current was a lock-exchange type with a density difference of 1% between the two fluids initially separated by a gate in the middle. In the computational model, the roughness was captured using two different methods depending on the size of the roughness elements. For the large roughness elements, i.e., the half spheres and the medium and large gravels, an immersed boundary method was used to resolve the surface of each gravel, which was obtained through 3D laser scanning. The realistic and physically correct placement of these scanned objects in the simulation domain was achieved using a computer tool which can detect the collision of rigid bodies and simulate their dynamics. For the fine gravels, a rough wall function was used. The computational model was validated with the data measured in the experiments, including front position and velocity, and point velocity measurement within the current. The results show that density currents over macro-roughness have distinct behavior from those over a smooth boundary. The characteristics (size, angularity, and pavement pattern) of the macro-roughness play a key role in the current development. Macro-roughness significantly retards the front propagation and enhances entrainment.     

Estimating the removal of atmospheric particulate pollution by the urban tree canopy in Beijing北大核心CSCD

Urban green space, particularly the tree canopy, plays an important role in potential mitigation against atmospheric particulate pollution and protecting human health. In this study, current and future air particulate matter [including total suspended particulate (TSP), particulate matter 10 (PM10), and particulate matter 2.5 (PM2.5)] removal by the urban tree canopy of Beijing was estimated. A modeling approach was used based on the distributed measurement evaluation and a modified version. The urban tree canopy of Beijing, including mostly Platycladus sp., Pinus sp., Quercus sp., Robinia pseudoacacia, and economic forests, currently removes about 8.33 million kg/a air particulates, in which TSP accounted for 4.51 million kg/a, PM10 accounted for 2.74 million kg/a, and PM2.5 accounted for 1.08 million kg/a. The study on the removal of air particulates by different aged tree canopies showed that in coniferous trees, the ability to capture air particulates changed in the order of mature and over-mature > near-mature forest > young forest; in broadleaf forest, the ability changed in the order of near-mature forest > mature and over-mature > young forest. For total particulate matter, the biggest contribution was coarse particulates (60.74%); the contribution rate of fine particulates was different owing to different tree species groups. The results suggested that the ability of different trees to capture particles and age of forests varied widely and that suitable trees should be chosen to enhance pollution mitigation for city greening. © 2018 Science Press. All rights reserved.     

Isolation,identification, and the biodegradation characteristics of a benzoylurea insecticides-degrading strain北大核心CSCD

A chlorbenzuron, diflubenzuron, and hexaflumuron-degrading bacterium strain M6, was isolated from the activated sludge of an insecticide factory. The strain was identified as Achromobacter sp. according to an analysis on the 16S rRNA gene sequences, morphological, and physiological characteristics. Strain M6 could degrade more than 91% of 100 mg/L chlorbenzuron, diflubenzuron, and hexaflumuron within 48 hours, which could act as the sole carbon source. Strain M6 showed more chlorbenzuron degradation at a temperature range between 25 and 40 ℃ and a pH range between 6.0 and 8.0. The optimal temperature and the initial pH of medium for chlorbenzuron degradation by strain M6 were 30 ℃ and 7.0, respectively; the maximum chlorbenzuron tolerated concentration of strain M6 was as high as 400 mg/L. Strain M6 hydrolyzed 4-acetaminophenol into a purple-red product. Moreover, an approximately 1.4 kb DNA fragment, which could be expressed into an amidase to degrade amide pesticides, was amplified from the genomic DNA of strain M6. The results preliminarily proved that 3 benzoylurea insecticides could be degraded because of strain M6 hydrolyzing their amide bonds. This study obtained a highly efficient degrading strain and provided new resources and valuable information on benzoylurea insecticide degradation. © 2018 Science Press. All rights reserved.